Looking for ideas to polish and maintain marble floors and other areas in your residence? Not to mention, it is not a straightforward task because there are certain things that make the maintenance work ideal. To maintain and care for marble kitchen countertops and floorings, you need to know them and bring back the beauty of this natural stone.
According to surveys, 30% – 40% of people hardly consider the significance of restoration process every 2 – 3 years. It is one of the main reasons why it takes time to bring back the original condition of this stone when people decide to work on this task later on.
Suppose you are willing to avoid calling an expert for the restoration operation, you have to follow certain guidelines to keep this material perfect. Let’s discuss them below-
Ways to Maintain and Polish the Surface of Marble Stone
Removing Stains
Porous material like marble usually absorbs liquids that cause stains. It gets trapped in this natural stone and there is a need for employing adequate removal methods. Common spillage items include sauces, wines, juices, coffee, tea, cooking oils, etc. In order to remove the stains, you can use a damp cloth and gently rub on the affected areas. Now, rinse thoroughly.
Removing Deep Stains
Certain spillage of liquids and other elements won’t get removed by using the above method. It is essential to gently apply a few drops of cleaning chemicals and use a bristled brush to rub on the affected area. You might have to leave this place unattended for at least half an hour before you use the brush to ensure complete removal of deep stains. Now, rinse thoroughly.
Polishing
Once the stain removal process is done, you can move ahead to polishing the marble surface. It requires good knowledge and time to complete the task without errors.
Before you begin the process, make sure of drying the marble surface. Now, follow these steps-
1. Prepare a mixture of baking soda and water
2. Mix them well and reach the affected area
3. Apply it as a thin layer on the surface
4. Allow it to dry by leaving it for 5 – 7 hours
5. Use warm water and a soft cloth to rinse the surface
This cleaning process might take a little time but it is going to offer you the desired look of this natural stone. Not to mention, there might be a need for hiring professional restoration services if you are not satisfied after polishing the natural stone by using DIY methods.
Is There a Need for Sanding Process After Polishing Marble?
In general, polishing is enough to bring back this material to its original condition. In case you find it difficult to achieve what you dream of, you can consider the sanding process.
The primary reason is that dirt and debris accumulation could cause this material to fade. Scratches and other elements can make the damage severe. This is why the only solution is to go for sanding process.
Steps for Sanding Marble Stone
1. Clean the affected area properly
2. Spray water to make the surface wet
3. Use sandpaper to clean the material
4. Sand it in a circular motion
5. Use a sealant if required to add protection
Now, it’s done.
Bottom Line
Suppose you find it difficult to invest time to perform the maintenance task, it will be convenient to hire a team of professionals. Experts can make sure to bring back the original condition of the marble kitchen countertops, floorings, benchtops, wall claddings, etc. by using practical methods. Even they guide you to let you avoid uncertain issues.
So, don’t leave the marble unattended when it requires maintenance. Hire a team of natural stone specialists to deal with the said task effectively.
