If you are searching for a method of how to connect HP smart printer to Wi-Fi, then you have come to the right blog post. In this blog post, you are going to acquire complete knowledge for connecting your HP printer to Wi-Fi regardless of your knowledge of printers. Users need to connect their printer to a network when they are using it for the first time. Also, this process is essential in the setup process of the printer. To help you connect your HP printer to Wi-Fi, we are going to tell you how to connect the printer, be it with a touchscreen or without a touchscreen. So keep reading this specific blog post till the end, and start using your HP printer right away for all of your printing jobs.
Connect the HP Smart Printer without a Touchscreen to Wi-Fi
If you are using the HP printing device with a touchscreen to Wi-Fi, then follow the steps below. It will guide you on how to connect HP smart printer to Wi-Fi on the touchscreen panel.
- Firstly, plug in the printer to the power outlet and turn it on.
- Make sure to place the printer close to the router.
- Do as the follow-up steps suggest to put your printer in WPS connection mode.
- If you are using the HP Deskjet 6000 and 6400, ENVY 6000 and 6400, and Tango printers, then you need to press and hold the Wi-Fi and Power buttons until the light flashes. The Power button is located on the back side of the printer.
- On other HP smart printers, then press the Wireless button for a couple of seconds.
- Within two minutes, move to the router and then press the WPS button until it starts the connection process.
- Now, look for the printer’s light to stop flashing, and then the printer will be connected to your wireless network connection.
Connect the HP Smart Printer with a Touchscreen to Wi-Fi
In order to know how to connect HP smart printer to Wi-Fi, follow the following steps. Here you need to use the printer control panel to establish the connection.
- Firstly, switch on the setup wireless printer and keep it near the range of the Wi-Fi router.
- Now, move to the printer’s touch panel and choose the Setup, Network, or Wireless settings menu.
- After that, you have to tap on the Wireless Setup Wizard option.
- Next, the printer will scan for the name of your HP smart printer.
- Select the name of your wireless network and type the password.
- Finally, the printer will be connected to your network connection.
Note: You need to select the Wi-Fi Protected Setup or WPS and then select Push Button. After that, follow the instructions to connect to the network.
Printing Documents on HP Smart Printer with Wi-Fi Direct on Mac
If you do not have access to an internet connection, then you can use the Wi-Fi directly to use the printer. This option is available on all HP printers that were released after 2014. So, the guide will help you print the document on a Mac device.
- First of all, you need to get the Wi-Fi direct printer name and then see its password.
- To see the password of your printer, tap on the Wi-Fi Direct icon.
- Also, you can print the network summary from the reports menu to learn about the password.
- After that, you have compatible and enough paper in the printer’s document tray.
- Next, you need to choose the document, such as photo, email, text, etc.
- Now, push the Wireless icon on the printer. And select the network option with DIRECT.
- Afterward, choose the option of the printer name you are using.
- When the prompt opens to ask for the password for the printer, then enter the correct password.
- Finally, you can print the file you want to print.
Frequently Asked Questions
How to Connect an HP Printer to a Device via Wi-Fi?
The following process will guide you on how to connect your HP printer to a device using Wi-Fi.
- From the HP support page, you need to download & install the HP Smart App.
- After that, you need to turn on the Wi-Fi setup on your device.
- Also, you are required to get your router in setup mode too.
- And then open the HP app on your PC and Set Up a New Printer option.
- Furthermore, follow the guide and complete the connection process.
What are Common HP Printer Wi-Fi Issues?
Below are some of the common Wi-Fi issues you can face with your printer.
● The printer is not connecting to the Wi-Fi.
● HP printer not working due to weak single.
● The printer is showing an offline issue.
● The printer is unable to detect the network connection.
● Your HP printer does not have the correct software and drivers, etc.
How Do I Connect My HP Printer to Wi-Fi?
The steps to connect the HP printer to Wi-Fi are as follows;
- First of all, prepare the printer by connecting its power cable to a power source and turning it on.
- On the touchscreen panel of your printer, tap on the Setup, Network, or Wireless settings menu.
- Also, choose the option of Wireless Setup Wizard.
- Now, select the name of your network when you see it on the screen.
- When you are asked to enter the password of your Wi-Fi network, then enter the correct password.
- After that, the HP printer will be connected to the Wi-Fi.
Visit also here: — linktr.ee/setupwirelessprinter
How to fix Samsung Printer Issues
How to Setup Epson Printer? Step By Step Guide