MBT couplers require neither bar end preparation to form threads nor bar rotation to effect installation. The bars are supported within the coupler by two serrated saddles. As a series of lock shear bolts are tightened to a predetermined torque, they are embedded into the bar. At the same time, the saddles bite into both the bar and the shell of the coupler. Installation is complete when the heads of all of the bolts are sheared off. The lock shear bolts on sizes 10mm to 20mm can be tightened using a ratchet wrench. For larger sizes, a nut runner is recommended. Impact tools must not be used. MBT couplers can be used to join imperial, plain round, or deformed reinforcing bars. We have dealers across Mumbai, Pune, Kolhapur, Solapur Delhi, Bangalore, Hyderabad, Kolkata, Raipur, Kota, Udaipur, Rourkela, Patna, Indore, Vijayawada, Vizag, Chennai, Kolkata, Surat, Vadodara, Ahmedabad, Rajkot, Mysore, Hubli, Mangalore, Gadag Chittoor, etc.
The bolted coupler is designed to transfer the load between two tension elements in welded or bolted form. The bolting of the couplers can be done by means of a threaded bar assembly. Bolted couplers are used whenever it is required to achieve a maximum lap length between the two tension elements without the use of any connecting element. Bolted Couplers are installed with bolts, nuts and washers which pass through holes bored along the edges of precast concrete slabs, steel plates or beams with an overlap on one edge. Bolts are then tightened down firmly, thus locking them into place.
The rebar coupler has been widely used in the construction industry to connect steel bars or other types of reinforcement bars. It is a quick and effective way to fix the bars in place and comes in different sizes so that it can fit any type of bar according to your requirement.
A rebar coupler is used to join two steel bars, commonly used in the construction of buildings. It is mainly used when it comes to connecting the rebar bars which are either made from carbon steel and are available in different sizes.
The MBT coupler is used in construction and is one of the main tools required when building a house, a school or any other structure where the reinforcement bars need to be connected. The main advantage of using this MBT Coupler is that it can be made in different sizes and hence can be customized according to the need. This also makes it easy for users to connect multiple rods together with the help of this coupler making its usage quite easy.
