logo
logo
AI Products 
Leaderboard Community🔥 Earn points

Features of ESP8266 ESP-12F WIFI MODULE |Campus Component

avatar
Campus Component
collect
0
collect
0
collect
1
Features of ESP8266 ESP-12F WIFI MODULE |Campus Component

The Latest ESP-12F ESP8266 Wifi Module AP & Station Remote Serial Wireless IoT Board is an integrated chip designed for the needs of a new connected world. ESP8266 ESP-12F can handle all the necessary overhead for communicating with your network, such as TCP/IP stack and communicating with your 802.11 networks. ESP8266 ESP-12F is completely addressable over SPI and UART protocols allowing you to connect your sensors or project directly to it through its GPIO’s. ESP8266 is a low-cost Wi-Fi chip with full TCP/IP stack and MCU (Micro Controller Unit) capability. ESP8266 Serial Wifi Wireless Transceiver Module is a self-contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your Wi-Fi network. ESP8266 Serial Wifi Wireless Transceiver Module is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor.

Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much Wifi-ability as a Wifi Shield offers (and that’s just out of the box)! The ESP8266 module is an extremely cost-effective board with a huge, and ever-growing, community. ESP8266 Wifi Module has a powerful enough on-board processing and storage capability that allows it to be integrated with the sensors and other application-specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, is designed to occupy minimal PCB area. The ESP8266 supports APSD for VoIP applications and Bluetooth co-existence interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions and requires no external RF parts.

ESP8266 ESP-12F WIFI MODULE Features:-

·       Compatible with ESP-12(ESP-202)

·       WIFI @ 2.4 GHz, support for WPA / WPA2 security mode

·       It is very easy to develop projects with AT commands

·       Surface Mount Package with 2mm Pitch Pads

·       Multiple GPIO’s for all your sensor needs

·       Wi-Fi Direct (P2P), soft-AP

·       Integrated TCP/IP protocol stack

·       Integrated TR switch, LNA, power amplifier and matching network

·       Integrated PLL, regulators, DCXO and power management units

·       +19.5dBm output power

·       Power down leakage current of <10uA

·       Integrated low power 32-bit CPU could be used as an application processor

·       SDIO 1.1/2.0, SPI, UART

·       STBC, 1×1 MIMO, 2×1 MIMO

·       A-MPDU & A-MSDU aggregation & 0.4ms guard interval

·       Wake up and transmit packets in < 2ms

·       Standby power consumption of < 1.0mW (DTIM3)

·       Both SMD and Inline package are available, and the pin pitch is 2.0mm.

Campus Component Makes it Easy:


Widest Selection: Find everything you need to complete your project at Campus Component, from resistors and capacitors to sensors and actuators, all at competitive prices.

Expert Support: Their knowledgeable team is always ready to answer your questions and offer guidance, ensuring you have the right components and expertise to succeed.

Fast Delivery: Get your hands on the ESP8266 ESP-12F quickly with their efficient delivery network, so you can start building without delay.


collect
0
collect
0
collect
1
avatar
Campus Component