No one wants to have mold in their home. However, catching the molds early can help to address the issue before it gets worse. In case you suspect mold in your home it is ideal to choose professional service for Mold Inspection in Houston.
Based on the size of your home, Mold Inspection Testing in Houston can cost as little as $150 to $2,660. Well, the primary reason to inspect the mold is to help yours breathe easily.
How to Prepare for Mold Inspection?
When you need mold inspection – it is essential to ensure potential spores that are intact when the professional arrives.
You can follow a few steps and prepare your home for mold inspection:
Shut Off the Humidifier
Air purifier can remove the moisture and impurities from the air – it is counterproductive while detecting the mold spores. It helps to enhance the moisture content that can accelerate the mold growth and distort the inspection.
In order to make sure the professional gets the accurate reading – you should shut off the device at least 24 hours before the appointment.
Close The Doors and Windows
Well, it might seem strange – in case mold is inside the home – you would want to offer the best conditions for growing. By closing the doors and windows – you can maximize accumulation of the spores that are likely to grow within your home.
Turn Off the HVAC System
HVAC system circulated the air in your home. It can dilute the mold spores in the air. Shutting the HVAC system off would ensure to maximize the concentration of spores for easy detection.
No Pruning, Trimming or Lawn Mowing
Mold inspection includes a baseline assessment of the natural concentration in the air. Any action of chopping, mowing and pruning might disturb the background mold and distort the baseline measurement.
Avoid Using Disinfectant or Chemicals
Vacuuming, dusting and heavy cleaning can eliminate mold growth within your home. Hence, it is ideal to avoid it for at least two days before the appointment. For the same reason – you can avoid spray disinfectant, bleach and chemicals as well.
Avoid Rainy Days
Rain is another crucial factor that may distort the outside baseline Mold Assessment. Since mold grows faster in wet condition – it tends to mast problem in case of higher concentration of mold in the indoor area.
Remove Clutter and Obstacle
Mold inspector should have the access to check all the areas in your home. Hence, you should remove the obstacles and clutter before time. Make sure to clear the cabinet around the sink – these are prime spots where mold grows.
Wrapping Up
Once the mold inspector arrives – they will consult with you about your specific concern and start their assessment.
