Common Mistakes to Avoid When Choosing TMT Bars for House Construction

Constructing a home requires massive planning beforehand and why not? You are investing your lifetime finances or maybe more in this project. Therefore, you must choose the right material for the construction of the house to last. Among these, the most crucial material is the best TMT bar for house construction which offers the structural strength to support the structure. However, the selection of a wrong TMT bar results in various problems right from the aspect of structural strength to the question of having to pay for repairs. 

This blog will focus on some of the mistakes that people make when choosing TMT bars for house construction and how to avoid them. Knowing these pitfalls will help you avoid them and make the right decision to have your home stronger and long-lasting.

Top 5 Mistakes to Avoid Before Choosing TMT Bars 

If you don’t learn from the mistakes of other people, then you will find yourself in the same position as others. So, it’s better to be safe than wasting your money. 

1. Not considering Quality Certifications

Failure to verify quality certifications of TMT bars is arguably one of the worst mistakes that could be made. Government and other international certifications such as BIS or ASTM certifications are important as they help in determining the capacity and safety of the bars produced. 

So, if you are thinking of using inferior materials, you are basically exposing your home to outer circumstances, thereby, reducing the stability of the home. 

2. Selection of Wrong Grade of TMT Bars

The best TMT bars for house construction are available in their respective grades, Fe415, Fe500, and Fe600 where each grade identifies the bar’s strength. Unfortunately, many builders do not take the time to evaluate the required grade in terms of the task at hand. For instance, using a grade TMT bar in a house that will bear loads or is to be constructed in a seismically active area will result in structural collapse. 

When deciding on the right grade of rebars to be used in construction and the amount of load it will have to support - high tensile steel, Fe500 and Fe600 should be used in structures that are in the special seismic zone while lower grades of steel can be used where structures are simpler and won’t have to bear many loads. 

4. Environment Not Being Taken Into Account

Some of the environmental factors that may affect the performance of TMT bars are usually ignored. When the bars experience harsh conditions like humidity coastal air or even chemicals, the bars tend to corrode and become weak. 

In regions with high humidity or near the seas, use TMT bars as the corrosion rates are high and degrade early. Knowing the type of environment that your home will be subjected to can assist you in determining the type of TMT bars you need. 

5. Failing to meet Structural Needs

Each construction project has specific structural features that must be provided for. These needs are not often considered, and this leads to the wrong choice of TMT bars that may not carry the required load. For example, failure to consider the nature of loads that your structure will have to endure — live or dead — is likely to produce serious problems during and after construction. It would be quite wise to get advice from a structural engineer because he will estimate the precise requirements of your project and advise you to purchase appropriate TMT bars for your home.

You may also like: How Do TMT Bars Protect You From Earthquakes?

Conclusion

The decision of which TMT bars to use will always determine the quality and lifespan of the home that you are constructing. As they say, the quality of the materials used in the construction projects will determine the stability and durability of the constructed projects. Therefore, getting the best TMT bars for house construction and consulting professionals is the way to go to make sure your home stands the test of time.