Although CPVC solvent cement appears to be simple to apply, some common mistakes can compromise the stability of the pipe. This article outlines these mistakes and presents valuable tips to ensure a long lasting solution.
Selecting the Wrong Type of Cement
With a wide variety of cements available, including numerous PVC and ABS alternatives, it is easy to get confused and pick the wrong option as it might be challenging for an untrained eye to weigh the pros and the cons. It's crucial to choose CPVC solvent cement because it is designed to work with CPVC pipes.
Not Prepping the Joints
The second most common mistake involves failing to prep the joint area properly. Adequate preparation is key for a strong bond. Too often, people, either don't do it, or they rush through it during installation. One should follow these steps prior to applying PVC Solvent Cement:
● Ensure that you have washed pipe ends and fitted as per the manufacturer’s direction.
● Then, remove all dirt, grease, and moisture from the pipe end or fittings.
● Wipe the surface area using a clean dry cloth.
● Check for pipe end imperfections or irregularities that would possibly interfere with the joint.
If you don't properly prepare the surface you may be hindering the chemical welding process from happening in an ideal environment.
Applying Too Much or Too Little Cement
Getting the right balance is most important. Too much cement results in sloppy joints and can be detrimental to the connection by pooling within the fitting. Too little cement results in dry areas and possible leak sites. A uniform layer that coats the entire bonding area is best.
Ignoring Weather Conditions
Cold weather makes CPVC cement set more slowly, whereas warm, dry weather causes evaporation to speed up. Modifying application methods in response to environmental conditions guarantees correct bonding.
Rushing the Assembly Process
Once cement is applied, most people wait too long or not long enough before coupling the pipes. The best window of time to couple is usually 15-20 seconds after application, when the cement is still wet but not running. Shifting or testing recently cemented joints before they are completely cured can weaken the bond. While the initial setting is fast, a full cure requires 24 hours in normal conditions. Patience during these hours could avoid premature joint failures.
Utilizing Old or Expired Cement
Solvent cements do not last indefinitely. If the product is used after the expiration date, the bonding qualities may be poor due to the loss of solvent or a change in chemical properties.
APL Apollo offers a complete selection of quality bonding solutions to provide you with reliable plumbing connections. The APL Bond CPVC Solvent Cement is specifically manufactured for pipe systems made of CPVC, to provide solid and durable joints when used properly.
APL Apollo has a variety of sizes to meet the needs of your project. The CPVC Solvent Cement comes in convenient 25 ML tubes, and tin pack sizes of 59 ML, 118 ML, 237 ML, 473 ML and 946 ML. For use with uPVC, the same size options are offered. The PVC cement range is even broader, with tin containers from 25 ML tubes up to large 5000 ML tins, and plastic bottle options in 50 ML to 5000 ML sizes.
By avoiding these common mistakes and using high-quality products such as the ones from APL Apollo Pipes, plumbers can make professional-standard connections that will last for years to come.
Follow us on:
Facebook: https://www.facebook.com/APLAPOLLO
YouTube: https://www.youtube.com/channel/UC_VuCZ7Nr4VsfoS81V063Ig?view_as=subscriber
Instagram: https://www.instagram.com/apl_apollo/
Twitter: https://twitter.com/ApolloPipes
LinkedIn: https://in.linkedin.com/company/apollo-pipes-ltd
Website: https://www.apollopipes.com/
