Make your 3D replica dolls with iKix My3D

New affordable consumer printers are hitting the market every week.

However, getting a quality print from your printer hinges on several factors.Here are five factors that contribute to the quality (or lack thereof) of your prints.

Printers may use extrusion technology or filament based fused deposition modeling.

Low resolution STL models result in pixelated prints that are rough and geometrically shaped.

On the other hand, super high resolution files may be too big for a printer to handle.

Be sure to read up on the documentation and guidelines concerning 3D printing on that software platform.In short, achieving a quality 3D print is hard.

 Generally, 2D drawings is a time-consuming process and often included errors while developing.

It leads to production delay and also production wastage many times.

Because in the 2D drawing, every single thing is represented in a sheet of paper, the chances of error and misinterpretations are evident.

That’s why Future Gen Technologies, the famous Revit training institute in Hyderabad providing Cad COURSE Training to the designers and architects.

But on the floor of the shop, still, we rely on 2D drawings.

By conducting virtual tests, you can identify quality problems and improve performance.

“The Avatar and the FireLord” is one of the best episodes in Avatar: The Last Airbender.

It gives a flashback into the life of the previous Avatar, Roku, and demonstrates his mastery over elements and his tempestuous relationship with Fire Lord Sozin.

But the episode reveals an intriguing aspect of Roku’s life and his fighting prowess.

Even though Avatars are destined to master all four elements, most are usually more comfortable using their native elements.

This was true for Aang, who used his airbending to assist his movements, and even in combat, he relied heavily on it.

It was the same with Kyoshi, who was seemingly more dexterous in using earthbending while Yangchen and Kuruk mostly used their native elements as well.

The AllFit Dental Casts are a smarter way to create thermoplastic splints.

The splints are produced from a 3D scan of the patient’s teeth and jaw, with minimal manual intervention.

This method of using the AllFit Dental Casts results in very accurate and calibrated devices which allow for a more comfortable treatment process.The process begins with taking a 3D scanning of the patient's teeth and jaws.

Once this is done, an impression will be made which will provide the required measurements for creating casts.These casts can then be created from a digital model that has been created from the 3D scan data.There is minimal manual intervention in this process, which results in highly accurate and calibrated devices that allow for an improved...Wirtten by allfit nasal cast. 

Archdraw Outsourcing providing a Point Cloud to 3D Model for the renovation of the old building by laser scanning data.

We have more than 12 years of experience in the AEC industry to offer 3D modeling services across the UK and European countries.