How to Check Bootloader Status Whether Locked or Unlocked

Want to know how to connect two monitors to a laptop?

Follow this article to the end, and we bet you will never go back to a single screen again.Things are easy when you already have two video ports on your laptop; however, if you don’t have two video ports, you will need a display port splitter adapter, Thunderbolt port, or a USB external display adapter.

Connect Two Monitors with a USB External Display AdapterA USB External Display Adapter can turn up your USB port into an external display port.

Mainly these adapters fulfill the role of adding a Display Port, DVI port, HDMI, or VGA port to the laptops.You will have to install its driver software before installing the adapter.

Once you have installed the driver software, shut down your PC.

After that, turn on your PC and let it complete the booting process, and then you may move on to the further steps.Make adjustments in your monitor to let your mouse’s cursor flow very smoothly between the additional monitors and your laptop display.

Boost up the speed of your existing Wi-Fi network with Netgear AC1200 WiFi range extender Setup without WPS at your home.

This Wi-Fi Range Extender will improve the performance of your current Wi-Fi network and extend the signals to reach locations with poor connectivity.

You can use the web page set up for setting up your extender if it does not support the WPS button.

Here are the step by step guidelines to follow:Check whether your computer is connected to the internet.If yes, disconnect your device from the network.After this, place your extender closer to the router.Turn on the extender and let the device complete the booting process.

The extender will take about 20 minutes for the boot.Once the extender has successfully completed its boot process, the light on a device will become steady green.Also, the other nearby light will flash in red.After this, you need to connect your device to the extender following the instructions below.Connect the device to the extender using wireless connectivity:Click on the button present on the taskbar of your system.

Proceed next and learn how to set up the extender without WPS.Now, you can see the list of a network showing on your screen.Choose the extender and network you would like to connect with.To complete the connection setup, you are prompted to enter the password for your extender.Find the extender wireless password on the backside of the extender guide.Once your device and Wi-Fi extender are connected to the same Wi-Fi network, you can proceed with the web-based setup.If you want to connect the extender through a wired connection, follow the steps below:Open any preferred web browsers on your computer.In the search field, type the IP address of your Wi-Fi Range Extender.A login dialogue box will appear on your screen, here you need to provide the extender admin password.Type the password and hit the login button.The setup wizard will appear, hit the Start button.Proceed with the on-screen guidelines and once you are done with the connection setup, hit the finish button.The extender configuration has been completed successfully, you won't face any network issue, and your browser will not close the connection while surfing.

The issue is certainly frustrating and if you are facing it as well, then we can help you fix it.

You need to go through this blog properly to learn how to fix Apple Watch pairing issues.Note: Apple Watch is not compatible with iPad or other Android gadgets and it needs a minimum 6/6 Plus or else the newer version.

Go for a reboot of your iPhoneFirstly, long press on the Sleep/Wake button of your iPhone till the toggle of switch off gets displayed.Then, you need to push the toggle on the right-hand side.

Observe that your iPhone device will be switched off.As soon as it completes many seconds of being switched off, you need to do a long press on the Sleep/Wake option until the symbol of Apple gets displayed.Whenever your iPhone is done with the booting process, you need to see the Apple Watch connection.

Go for a reboot of your Apple WatchFirstly, long-press the button on your Apple Watch just below the crown.Whenever asked, push the power off option on the right-hand side.As soon as the display gets dark for some time, press the digital crown for switching on the Apple Watch like earlier.

Note that the symbol of Apple gets displayed on the screen.

The Android Online Training will give you all the information expected to work with the Android stage and Android programming.

This Android course will empower you to create Android applications and register them on the Google Play store to show the world your imagination.

Our Webpage: https://shapemyskills.in/courses/android/Contact us: +91-9873922226.

Just got a new Amazon Echo Show 5 and want to set it up?

We are here to help you.

In this guide, we will be sharing the simple steps that will help you to complete the Echo Show 5 setup on your device.

Amazon Echo Show 5 is a smart speaker that comes with a touch screen that allows the users to do a number of things.

While setting up your Amazon Echo Show device, just make sure that you have the Wi-Fi network name and password along with your Amazon account login credentials.

Register your device at 'amazon.com/code'.

Let’s see how to use and deploy Jenkins CI flow for Android apps. Specifically, setting up automated unit testing and building projects step-by-step.
 
Diving into development for Android OS, you’ll probably hear about a thing called unit testing. In fact, development for any platform has a thing for unit testing. And that’s because of a reason.

README: All examples are on Android Studio, Android SDK and Linux (so if you’re not into these, some examples may be hard to follow. Or not ;) We also covered CI server on Mac OS for iOS using GitLab and Fastlane for iOS devs.

The iPad's slim, lightweight design makes it easier than a laptop to carry.

For retail sales, the iPad offers a variety of apps that can turn it into a virtual cash register for accepting purchases and generating receipts.

There are a variety of situations in which salespeople may find iPads useful, but each situation requires that the salesperson has the appropriate apps to maximize iPad use.There are many benefits of iPad repair.

Firstly, the device acts as both a phone and a computer due to its portability.

It also connects to wifi well, captures great pictures, shoots videos, and performs internal web browsing features.

Its damage therefore interferes will all those functions, making the repair necessary.iPad Repair is a cheap alternative to purchasing a new one.

Many Android users want to use older versions of Android apps without updating.

Here's how to downgrade apps on Android without root.

In case you do not want to spend any money on a brand new GPU, then the only thing you can do is to increase dedicated video RAM in Windows 10.

In this article, you will get different ways to complete this procedure by using the BIOS and Registry Editor.Steps to Increase Dedicated VRAM Using BIOS Go through the steps mentioned below to know how you can increase the Dedicated VRAM through BIOS.

Make sure that your computer is turned on already to complete this procedure:•    Start the system again.•    Type the BIOS settings tab.•    You need to press on the dedicated BIOS key while going through the booting process.•    Click on F2, F5, F8, or Delete key.•    In case it doesn’t solve this issue, then find online for particular steps on typing the BIOS settings.•    After going to the BIOS menu, find the menu which is same as Graphics Settings, Video Settings, or VGA Share Memory Size.•    You will get it below the Advanced menu.•    Start saving the configuration.•    Start the system again.•    You need to use the same procedure mentioned above to check if you have successfully increased the VRAM count.Steps to Increase Dedicated VRAM Using  Registry EditorDo you want to increase dedicated VRAM?

Then try to use the Registry Editor to complete this procedure on your Windows 10 PC:•    Click on the Windows and R keys together.•    It will open the Run prompt box.•    Enter “regedit” in the given box.•    Click on the Enter option.•    It will launch the Registry Editor option.•    In the Registry Editor, start using the left side panel  to go to the below-mentioned command:HKEY_LOCAL_MACHINE/Software/Intel•    You need to right-click on the Intel key.•    Select the New option.•    Click on the Key button.•    Give a title to the GMM.•    After choosing the GMM key.•    Go to the right-hand panel.•    Choose the New option.•    Choose a Dword Value.•    You need to give title as DedicatedSegmentSize.•    Click twice on the DedicatedSegmentSize, change the Base to Decimal.•    Place value from 0 to 512.•    It is the value which is an amount of VRAM showing in the Adapter Properties menu list.•    Start saving the changes you have done.•    Start the system again to save the changes.•    Check if you have successfully increased dedicated video RAM in Windows 10.Steps for Checking the video RAM amountDo you want to check the video RAM amount?

Then go through the steps mentioned below to do so:•    Click on the Windows and R keys together.•    It will launch the Run prompt box.•    Enter the “mssettings:easeofaccess-display”•    Press on the Enter option.•    It will launch the Display option.•    It is located in the Settings application.•    Go down and press on the Advanced display settings tab.•    Press on the Display adapter properties option.•    Go through the VRAM count given below the Adapter information at Dedicated Video Memory option.Emily Williams is a self-professed security expert; she has been making the people aware of the security threats.

Her passion is to write about Cyber security, cryptography, malware, social engineering, internet and new media.

This has specifically aided Android significantly in gaining market share.

The Android operating system is projected to account for almost 60 percent of the global tablet operating system market share by 2020.

SQL is required to query the database (insert, modify, delete and drop records)

Android Software Development Kit (SDK) and Android Studio – Android Studio is the officially integrated development environment (IDE) for Android App Development.

Developers write code with help of Android packages and libraries.

With Kotlin existing libraries can be leveraged for the JVM, Android and the browser.

Arlo Doorbell Camera Installation Arlo Essential Video Doorbell is a great device for home security.

With Arlo doorbell camera installation, users can keep watch over the doorsteps with ease and convenience.

If you are also looking forward to installing the Arlo Essential Video Doorbell Wired,  you need to get the Arlo app downloaded.

In this post, we will share some simple instructions that can help you complete the Doorbell installation at home.

So keep reading, and proceed with the simple steps to complete the task.Things you need for Arlo Essential Video Doorbell Wired installation:For installing the Arlo login cameras,  you must have:• Arlo App.• A screwdriver.• A power drill.Before you begin with the installation process you need to:• Make sure that you have turned off the breaker.• Have every item mentioned in the manual section.• Install the Arlo power kit you got with the box.Step by step instructions to install Arlo  DoorBell Wired:• First of all,  you need to remove the existing doorbell.

Disconnect all the wires from the existing doorbell.• Now install the Arlo Essential Video Doorbell Wired.• Turn on the power at the breaker.• The LED in the front of the doorbell must be white.

Do you have any Android smartphone?

If yes, then there is one good news for you.

You shall be able to get Android notifications on your computer of Windows 10.

You shall be able to get the complete message history from the device of Windows 10.More Information : http://quick-mcafeecom-activate.com/how-to-sync-your-android-notifications-to-your-pc/