Nikon camera has a strong flash for taking the best photos even when there is no light. But, you will face some of the issues with the flash of the Nikon camera. Many users are complaining about the Nikon camera flash not working error. Other users are reporting that when the flash start showing on the screen, it doesn’t fire. So, if you need to fix this error, then you have to follow the different methods given in this article.
Here’s how to fix Nikon camera flash not working error’
- Cleaning the dust
Before you go through the troubleshooting the Nikon camera procedure, ensure that the camera you are currently using permits flash to work properly. Here are the steps mentioned below to do so:
- It might be possible that there is dust in the hold of the camera flash.
- This can impact on the camera sensor, which is causing an error with the flash.
- Firstly, try to clean the flash section in case there is any dust.
- Start using the blower for blowing out the data from the flash section and also the other things which are causing errors with a flash.
- In case you do not have the blower at your home, start using the clean cloth for cleaning the flash section.
- You need to start wrapping the cloth to the screwdriver.
- After that, remove dust from the flash section.
- After completing all these steps, ensure that you are already enabled the Flash option.
- Press on the photo.
- Then, you need to check if the flash of the Nikon camera is working properly or not.
- Or, you have fixed this issue or not.
- Troubleshooting the flash sensor
In case the sensor of the Nikon camera is not supporting the flash, then you need to follow the steps mentioned below:
- Put the camera into the Auto mode.
- If you have close the camera shutter half, then it is compulsory to have the flash.
- It will show you the flash option on the camera screen.
- You need to free the camera shutter.
- You have to close the camera shutter again half.
- After that, you need to check whether you hear the clicking sound or not.
- In case the sensor of your Nikon camera is working properly, then the camera will not hide the flash option.
- Fix the sensor of the Nikon camera
- Firstly, take out the two screws from the flash front side.
- Take out the rear plastic envelope.
- In the rear plastic envelope, you will find the small button on the right-hand corner of the flash option.
- Take out the spring screw from any other corner of the screen.
- Start taking out the bracket.
- Take out the white sleeve which is located on the right-hand corner of the screen.
- The sleeve moves smoothly.
- You need to place the flash bracket into the camera because the wire is thin.
- You will get the white plastic bearing with the two little clips.
- This should be through the bracket and hole.
- After that, you need to place the flash again so that you can take out from it.
- You need to fire the flash so that you can check if the flash is working properly or not.
Source url:- http://retailcard-activation.com/blog/how-to-fix-nikon-camera-flash-not-working-error/
Ava Williams is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cybersecurity, cryptography, malware, social engineering, internet and new media. He writes for Mcafee products at mcafee.com/activate
