Managing your household chores would have been a complete mess without your refrigerator and washing machine. However, it is the control board of these machines that determine how perfectly they are going to work. There are a few signs and indications that might show that the control boards need some check-up. Here’s a small guide on how you can make it.
Checking Your Refrigerator
The electronic control board in your refrigerator is designed to manage and monitor the important temperature settings, such as defrosting and cooling times. So if you see that your freezer or fridge is not defrosting well, or is too warm, or too cold, then servicing or replacing the control board becomes necessary to solve the problem.
-
The refrigerator does or start, or runs even after you have turned it off
-
The freezer or fridge is not as cold as it ought to be
-
The top unit is not cold enough
-
The fan runs continuously
-
The freezer is icing up
Checking Your Washing Machine
The motor control board or the MCU of washing machine regulates the speed of the washer’s spins. If the MCU develops a defect, then the washer would start agitating, or would not spin at all. You are also likely to find a situation when your washer is functioning perfectly, expecting its job of draining water. If the condition persists even after your installing a new pump, then it might be the time for Washer Control Board Repair.
However, there are some more issues that typically crop up while operating washing machines. Here’s a short note on what might go wrong, and how to fix it.
-
The machine does not rinse properly: It could be because you are overloading the machine, or not using the right quantity of detergent in the load. Also, check whether the water is getting into the barrel or is draining out properly.
-
The machine is not making sound while setting on a cycle: It might be facing some difficulty to receive electrical power.
-
The machine stopped when it is programmed to carry on to the next washing cycle: See whether the overload protector is getting tripped. In that case, take out some articles to cut down on the load. Restart the machine to see if it works now.
-
Also, see whether your machine is properly plugged in, as well as turned on.
The online forums are a great place to find references for companies that offer excellent control board repairing services. If you check some of the reviews, you can see a number of contributors in the forums have some common names to refer. Boardbusterzis just one among them. You can visit the site Boardbusterz.com. They have team of professionals to offer the best solutions in the market.