Electricity has become the most important source of controlled energy in our life since its discovery in the 1900s. It has become so prevalent in our life that we don't even acknowledge the benefits and hazards related to it.

The power supply of 240volts, 50 Hz we get in our house, is enough to kill an adult human by electrocution; still, we take safety around this energy source for granted. According to the National Fire Protection Association, electric malfunction is one of the leading causes of house fires. On average, an electric malfunction causes 34,000 house fires per year, which damages the property of around $1.4 billion per year. And while renovating the house, chances of an electric accident increases ten folds.

But all of this damage is evitable; you just need to take care of electrical safety tips mentioned below.

Avoid overloading outlets

While remodelling home, avoid the use of a single outlet to support multiple electrical devices. This can cause the outlet to become overloaded and can cause a short circuit and ignite a fire. In the case of the requirement of various equipment at once, you can use a 100 foot extension cord and a power strip to support different equipment. While using the extension cord, make sure you place it correctly, irresponsible spread extension can be hazardous, and you can trip over it, causing injury possibilities and damage to the house wiring and equipment.

Use Quality Wires

Faulty wires are one of the primary agents in igniting a house fire. So while choosing wire for your house, your major factor while selecting it must be safety. A good quality wire must work consistently in electric fluctuations, overloading, and electrical failure. After installation, wiring must be checked at regular intervals for any physical damage. If you find any damage, replace the wire immediately with the help of a qualified electrician. Also, always buy double insulated wires for extra protection from electrocution. Check this Guide to Creating a Functional Home.

Baby Proof Electrical Outlets

Holes of the electrical outlets can be a place where children can stick their fingers. These outlets can be hazardous for children because of the chance of electrocution. To prevent yourself from such harmful situations, try installing the sockets on a height where children can't reach them quickly, for reachable outlets use tamper-resistance safety caps. With that, take care of any damaged appliance or power cord, repair, or replace such a device immediately. And try to keep all the extension cord away from the reach of children, for that you can tie up the loose wires and extension cords. Check out deepinmummymatters.

Keep electrical outlets and equipment away from water

Water is one of the best sources of electricity, and if they both come in direct contact, they can be a deadly duo. Water and electricity can be very hazardous and even cause death by electrocution. To prevent this scenario, all the electrical appliances and outlets must be kept away from the water outlets. If the appliance is required near the water supply, it must be properly covered with an insulating film. In the case of spilling water near an appliance, you should immediately unplug the appliance and dry it properly.

Install Smoke Detectors

Smoke detectors play an important role in detecting initial fires and warning in time to save you. You must install a smoke detector at every level and every room of your house, especially in the kitchen, storerooms, and bedrooms. You should install battery-operated smoke detectors and must check them at regular intervals to make sure they are in proper working condition. Replace the battery and clean the smoke detectors every six months. Smoke detectors can be less effective due to the poor installation design and less coverage area. So you must take care to have a proper design for proper coverage.

Install Miniature Circuit Breaker

Miniature Circuit Breakers (MCB) is a very important security device during renovation work. There could be multiple sites of leakage of electricity, which could be because of faulty connection or overloaded circuits or damaged wires. MCB can detect the slightest of the electricity leakage and will automatically break the circuit, cutting off the power supply in that region. This could save you from many hazardous situations where you can be electrocuted because of the leaking current or could stop a potential fire. Make sure you install an MCB for every circuit of the house and check it if it works properly.

Hire Professional Electrician

While doing the renovation work, never overestimate your abilities regarding electrical work. Know your limits and hire a professional electrician for managing the electrical work of your house. He can provide you with a proper and most efficient model of electrical wiring for your house while following all the security guidelines provided by the government. Moreover, the work of a professional electrician can be certified and help you a lot in case of an insurance claim.

Conclusion

Renovating work can be tiring and may cost you a fortune, but this is the investment you must make. A proper renovation work provides you comfort and safety for a long period. While renovating, you must take care of the safety of yourself and the people around you. Electrical safety is very important at every time to save you from a hazardous situation. You must follow the tips as mentioned above to have safe and proper renovation work.