Sachiya Steel International is a known manufacturer and exporter of Cupro Nickel 70 Channel Other Products, which offers excellent corrosion resistance, especially in marine saltwater environments. For the sake of accuracy, Cupro Nickel 70 / 30 Angle are presented in bold type in the units in which it was originally published with the lighter type equivalents in corresponding units.
Cold Working Cu-Ni 70 / 30 Chain (UNS C71500) has good cold working capacity, where a typical mix is 75 % copper, 25 % nickel, and a trace amount of manganese. Handy architects utilize the finest quality material and propelled methods to fabricate Cupro Nickel 70 / 30 C-Channel at industry standards.
Cupro Nickel 70 Channel | Cupro Nickel 70 Channel | Cupro Nickel 70 Channel | Cupro Nickel 70 Channel | Cupro Nickel 70 Channel | Cupro Nickel 70 Channel | Cupro Nickel 70 Channel | Cupro Nickel 70 Channel | Cupro Nickel 70 Channel | Cupro Nickel 70 Channel
High conductivity (HC) electrolytically refined Copper Nickel 70 / 30 I-Beam (sometimes known as a tough pitch copper or “electro”), with a nominal conductivity of 100% IACS (International Annealed Copper Standard), is used for most electrical applications such as bus-bars, cables and windings. We are one of the well recognized manufacturers and exporters of a sturdily designed array of Cu-Ni 70 / 30 H-Beam, which are machined in sync with the industrial norms using modern machinery and excellent grade raw materials. Hot Working Cupro Nickel 70 / 30 T-Beam is hot formed in an excellent manner, which is utilized in the different kind of business. Cu-Ni 70 / 30 Angle has excellent ductility which means that it can be easily drawn to fine wire sizes and it is available in all fabricated forms.
Cupro Nickel 70/30 Angle, Channel, Beam, Chain Specifications |
||
| Specifications | : | ASTM B151 / ASME SB151 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Cu-Ni 70/30 Angle |
: | 5mm to 9mm |
| Cu-Ni 70/30 Channel |
: | 40mm*20mm~300mm*300mm |
| Cu-Ni 70/30 Beam | : | 3″ thru 12.31″ |
| Cu-Ni 70/30 Chain |
: | 1/8 inch – 1/2 inch Diameter |
| Thickness |
: | 3.0mm – 120mm |
| Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
| Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
70/30 Cupro Nickel Angle, Channel, Beam, Chain Chemical Composition
| Grade | Cu | Mn | Pb | Ni | Fe | Zn |
| Cu-Ni 70/30 | 65 min | 1.0 max | 0.05 max | 29-33 max | 0.4-1.0 max | 1 max |
Cupro Nickel 70/30 Angle, Channel, Beam, Chain Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 0.323 lb/in3 at 68 F | 2260 F | 50000 psi | 20000 psi | 30 % |
Equivalent Grades for 70/30 Cupro Nickel Angle, Channel, Beam, Chain
| STANDARD | WERKSTOFF NR. | UNS |
| Cupro Nickel 70/30 | 2.0882 | C71500 |
Sachiya Steel International offers Cupro Nickel 70 Plates, Sheets and Coils, which are considered and factory – made at our hi-tech manufacturing unit.
Some usual applications for Cupro Nickel 70 / 30 Plates include: pump components, valves, etc.
Cupro Nickel 70 / 30 Coils have outstanding pitting and corrosion resistance in marine atmospheres.
Cupro Nickel 70 / 30 Slating Coils are ductile and strong.The small content of iron provides Cupro Nickel 70 / 30 Perforated Coils (UNS C71500) an unexpected resistance to wide – ranging corrosion and SCC, making it very appropriate and perfect for the marine or manufacturing industries.
Meanwhile, Cu-Ni 70 / 30 Sheets are also being offered in different sizes and shapes to our customers.Cupro Nickel 70 Plates | Cupro Nickel 70 Plates | Cupro Nickel 70 Plates | Cupro Nickel 70 Plates | Cupro Nickel 70 Plates | Cupro Nickel 70 Plates | Cupro Nickel 70 Plates | Cupro Nickel 70 Plates | Cupro Nickel 70 Plates | Cupro Nickel 70 Plates | Cupro Nickel 70 Plates | Cupro Nickel 70 PlatesCu-Ni 70 / 30 Plates are as well used in Water Boxes – Salt Water Applications, Salt Water Flanges, Salt Water Piping, Pump Bodies and Internal Parts-Sea Water, Fittings.
Cu-Ni 70 / 30 Coils is also used in Valve Bodies, Sea Water Service, Sea Water Condensers, Salt Water Pipe Fittings, Water Boxes – Salt Water Applications & Salt Water Flanges.Known for their flexibility, high corrosion resistance, superior tensile strength, trouble free installation and maintenance, Cu-Ni 70 / 30 Slating Coils are in demand in different industries.
Sachiya Steel International is a known Manufacture and exporter of Cupro Nickel 70 Tube to Female Pipes, which are available in a wide selection of product forms.
Our Cupro Nickel 70 Tube Fittings has different features such as tensile, hardness, impact, creep and fatigue data that have been abstracted from the relevant original form.
These Cupro Nickel 70 Compression Fittings have great resistance to sea water – related corrosion due to the presence of significant amounts of manganese and iron.For this reason, our Cupro Nickel 70 Ferrule Fittings is used for piping, heat exchangers and condensers in seawater systems, marine hardware, and sometimes for the propellers, crankshafts and hulls of premium tugboats, fishing boats and other working boats.
These Cupro Nickel 70 Double Ferrule Fittings may perhaps also be possible to make material outside these sizes by arrangement by means of the supplier.The main possible combinations of properties which are being often unique to copper base alloys enable them to meet the challenges of modern life in many ways, making our Cupro Nickel 70 Female Connector Fittings suitable for applications in virtually every area of human activity.
Offered in different sizes, thicknesses, shapes and designs, these Cu-Ni 70 Compression Tube Fittings are being valued for their excellent performance, high conductivity, durability, reliable operation and corrosion resistance.
Cu-Ni 70 Tube to Female Pipes SpecificationsSpecifications:ASTM B122 ASME SB122Size:OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Pressure Rating:3000 – 4000 PSIApplicable Temperature:150-400 CType:Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
Sachiya Steel International is a Leading Manufacture And Exporter Of Cupro Nickel 90 Wire.
Some of the primary uses for Cupro Nickel 90 Wire include condensers as well as exchanger shells.
Cupro Nickel 90 / 10 Wires has 2 % to 30 % nickel, high oxidation resistance and stress corrosion cracking resistance.
Some common applications for Cupro Nickel 90 / 10 Coil Wires include: valves, pump components, fittings, flanges and various other marine hardware components.
The inclusion of controlled quantities of iron and manganese also give Cupro Nickel 90 / 10 Wire an extraordinary resistance to general corrosion and stress cracking, as well as to erosion and impingement due to turbulent water containing air bubbles and silt flowing at high velocities.Cupro Nickel 90 / 10 Coiled Electrode is highly resistant to corrosion in seawater because its electrode potential is adjusted to be neutral with regard to seawater.
Cu-Ni 90 / 10 Wire is not recommended for usage in heavily polluted water containing sewage and industrial wastes.
Sachiya Steel International offers Cupro Nickel 90 Round Bar, which is factory – made by our expert workmen who stand by factory required necessities of all the clienteles.
Cu-Ni 90 / 10 Square Bars is generally used in Fish crates for aquaculture, Hydraulic lines, Heat condensers and exchangers, Desalination units, Tubes for ships and power plants, Sea water pipework, Offshore fire water systems, and so on.Cupro Nickel 90 / 10 Flat Bars is a copper – based alloy industrialized as an economical substitute for Cu Ni 70 / 30 Round Bars.
Meanwhile, these Copper Nickel 90 / 10 Threaded Bars (UNS C70600) are an alloy of nickel, copper and firming components such as manganese and iron.
Meanwhile, Cu-Ni 90 / 10 Hollow Bars are also being offered in different sizes and shapes to our customers.Cupro Nickel 90 Round Bar | Cupro Nickel 90 Round Bar | Cupro Nickel 90 Round Bar | Cupro Nickel 90 Round Bar | Cupro Nickel 90 Round Bar | Cupro Nickel 90 Round BarCupro Nickel 90 / 10 Hexagonal Bars are alloys of copper (base metal with the largest individual content) and nickel with or without other elements, whereby the zinc content may not be more than one percent.
For many decades, Copper Nickel 90 / 10 Triangular Bars have extensively been used as a piping material for seawater systems in shipbuilding, offshore, and desalination industries.
Cu-Ni 90 / 10 Bars for marine use were developed for naval applications in the early part of the century with a view to improving the corrosion resistance of condenser tubes and seawater piping.
Cupro Nickel 90 Wire Mesh has some of the attractive characteristics such as excellent resistance to uniform corrosion, remarkable resistance to localized corrosion in chlorinated seawater, and higher erosion resistance than other copper alloys and steel.
This Cupro Nickel 90 / 10 Welding Wire Mesh still enjoy widespread use today not only for many navies but also in commercial shipping, floating production, storage and offloading vessels (FPSOs), and in multistage flash desalination.Our Copper Nickel 90 / 10 Netting Wire Mesh is excellent on hot and cold workability and is resistant towards atmospheric, brackish water, sea water and non – oxidizing acid corrosion.
This Cupro Nickel 90 / 10 Woven Wire Mesh resists corrosion by fast moving water, which is as well highly resistant to SCC.
Our Copper Nickel 90 / 10 Spring Steel Wire Mesh is a copper – nickel alloy with an alpha phase structure, where the cast structures have alpha dendrites that contain huge quantities of nickel content.These Cupro Nickel 90 / 10 Fencing Wire Mesh has undergone tests that indicate it has excellent antimicrobial properties.
Our Cu-Ni 90 / 10 Wire Mesh is widely used in marine service, offshore platform sea water piping, tidewater power plants, desalination plants, oil refineries, and in the chemical process industry.
Of all commercial copper alloys, these Copper Nickel 90 / 10 Wire Mesh offers the best resistance to aqueous corrosion.
