Sachiya Steel International is a prominent Manufacture, supplier, exporter and manufacturer of Stainless Steel 321 Angle, Channel, Beam, Chain, which has some great features to offer such as Accurate dimension, Excellent performance, Long service life, Reasonable price, Low maintenance, Optimality, Ease of fabrication, and so on. The procuring agents employed with us ensure that our experts use only quality raw material for the fabrication of our Stainless Steel 321 Angle.
We also offer these in different grades and specifications, where this Stainless Steel 321H C Channel is often used in requiring low tensile strength, components of small cross section, as well as heavy forging in the normalized condition for automotive & general engineering such as presses & Punches Parts, axles, clutch shafts, Piston rods & gear rods. Our Stainless Steel 321 H Beam is widely acclaimed in the industry for their long lasting nature, robust construction, dimensional accuracy, high tensile strength and rust free nature.
Stainless Steel 321 Angle | Stainless Steel 321 Angle | Stainless Steel 321 Angle | Stainless Steel 321 Angle | Stainless Steel 321 Angle | Stainless Steel 321 Angle | Stainless Steel 321 Angle | Stainless Steel 321 Angle | Stainless Steel 321 Angle | Stainless Steel 321 Angle
We have the widest range of these Stainless Steel 321H I Beam in one roof manufactured under strict quality norms, which are further manufactured using superlative quality raw materials. Moreover, our ability to fulfill emergent of bulk orders of our Stainless Steel 321 T Beam within the specified time has enabled us to serve huge clientele. Due to their number of advantages, this Stainless Steel 321H Chain is acknowledged in various heat – testing equipment’s.
SS 321/321H Angle, Channel, Beam, Chain Specifications |
||
| Specifications | : | ASTM A 276/A 276M,A 484/A 484M,A 564/A 564M,A 582/A582M,A 638 /A 638M,A705/A705M |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| SS 321 Angle |
: | 5mm to 9mm |
| SS 321 Channel |
: | 40mm*20mm~300mm*300mm |
| SS 321 Beam | : | 3″ thru 12.31″ |
| SS 321 Chain |
: | 1/8 inch – 1/2 inch Diameter |
| Thickness |
: | 3.0mm – 120mm |
| Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
| Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
321/321H Stainless Steel Angle, Channel, Beam, Chain Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | N | Ni | Ti |
| SS 321 | 0.08 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 – 19.00 | 0.10 max | 9.00 – 12.00 | 5(C+N) – 0.70 max |
| SS 321H | 0.04 – 0.10 | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 – 19.00 | 0.10 max | 9.00 – 12.00 | 4(C+N) – 0.70 max |
Stainless Steel 321/321H Angle, Channel, Beam, Chain Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1457 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Equivalent Grades for 321/321H Stainless Steel Angle, Channel, Beam, Chain
| STANDARD | WERKSTOFF NR. | UNS | JIS | EN |
| SS 321 | 1.4541 | S32100 | SUS 321 | X6CrNiTi18-10 |
| SS 321H | 1.4878 | S32109 | SUS 321H | X12CrNiTi18-9 |
SS 321/321H Angle, Channel, Beam, Chain Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is a well-known firm that Manufacturer and Export a wide range of Stainless Steel 321 Wire Mesh, which improves the elevated temperature properties of the alloy.
The increased addition of carbon in Stainless Steel 321 Wire Mesh allows for a greater creep resistance and higher strength performance in elevated temperature environments (above 530°C).
Stainless Steel 321H Wire Mesh may be susceptible to chloride stress cracking and excellent weldability in field.
For cleaning the surface of Stainless Steel 321 Hexagonal Wire Mesh, the processes brushing, grinding, pickling or blasting (iron-free silica sand or glass spheres) can be applied.Stainless Steel 321H Welding Wire Mesh responds well to hardening by cold working and has good welding characteristics.
Stainless Steel 321 Netting Wire Mesh is the grade of choice for applications in the temperature range of up to about 900°C, combining high strength, resistance to scaling and phase stability with resistance to subsequent aqueous corrosion.The resultant austenitic structure of Stainless Steel 321H Woven Wire Mesh at room temperature has optimum corrosion resistance containing as it does all of the chromium in solution.
This titanium addition in Stainless Steel 321 Spring Steel Wire Mesh reduces or prevents carbide precipitation during welding and in 800 – 1500 °F (427 – 816 °C) service.
Sachiya Steel International is one of the well-established Manufacture and Exporter of Stainless Steel 347 Angle , which is not expected to migrate easily into soil or groundwater based upon its insoluble form.
Nevertheless, if finely divided, Stainless Steel 347 Angle becomes mobile in water and contaminates soil and groundwater.
The resistance to corrosion and staining, low maintenance, and familiar lustre make Stainless Steel 347 C-Channel an ideal material for many applications.
Stainless Steel 347 H-Beam differs from carbon steel by the amount of chromium present.
Unprotected Stainless Steel 347 I-Beam rusts readily when exposed to air and moisture.Stainless Steel 347 T-Beam have 0.03 % carbon maximum, which are resistant to sensitization in short – term exposures or heat treatments.
Stainless Steel 347 Chain often has slightly lower minimum strengths than standard stainless steels.
Sachiya Steel International is a Leading Manufacture And Exporter For a wide range of Stainless Steel 321 Tube to Union, which has better high temperature properties than 304 or 304L.
When comparing the chemical structure of Stainless Steel 321 Compression Fittings against standard austenitic grades such as SS 304 / SS 316 the main separating factor is the Titanium content, which is used as a stabilizing element allowing the material to operate at a higher temperature range.
Stainless Steel 321H Compression Fittings should be neglected to mark within the welding seam zone with oleaginous bolts or temperature indicating crayons.Titanium in Stainless Steel 321 Tube Fittings preferentially reacts with carbon in the steel and prevents precipitation of chromium carbides at the grain boundaries, thus preserving corrosion-resistant properties by preventing depletion of chromium near the grain boundaries during exposure within critical temperature range.
Austenitic Stainless Steel 321H Tube Fittings during annealing are heated to fairly high temperatures, typically 1050 Degree C – 1100 Degree C to ensure that all chromium carbides present are dissolved and all of the chromium is taken into solution in the austenite.Stainless Steel 321 Tube to Union | Stainless Steel 321 Tube to Union | Stainless Steel 321 Tube to Union | Stainless Steel 321 Tube to Union | Stainless Steel 321 Tube to Union | Stainless Steel 321 Tube to Union | Stainless Steel 321 Tube to Union | Stainless Steel 321 Tube to Union | Stainless Steel 321 Tube to UnionStainless Steel 321 Ferrule Fittings is considered resistant to potable water with up to about 200 mg/L chlorides at ambient temperatures, reducing to about 150 mg/L at 60 °C.
Stainless Steel 321H Double Ferrule Fittings resists polythionic acid stress corrosion cracking in hydrocarbon service.Stainless Steel 321/321H Tube to Union SpecificationsSpecifications:ASTM A276 ASME SA 479Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Stainless Steel, 300/1000/3000PSI for BrassSS 321/321H Tube To Union Chemical CompositionGradeCMnSiPSCrNNiTiSS 3210.08 max2.0 max1.0 max0.045 max0.030 max17.00 – 19.000.10 max9.00 – 12.005(C+N) – 0.70 maxSS 321H0.04 – 0.102.0 max1.0 max0.045 max0.030 max17.00 – 19.000.10 max9.00 – 12.004(C+N) – 0.70 maxStainless Steel 321/321H Tube To Union Mechanical PropertiesDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation8.0 g/cm31457 °C (2650 °F)Psi – 75000 , MPa – 515Psi – 30000 , MPa – 20535 %Equivalent Grades for 321/321H Stainless Steel Ferrule Fitting Tube To UnionSTANDARDWERKSTOFF NR.UNSJISENSS 3211.4541S32100SUS 321X6CrNiTi18-10SS 321H1.4878S32109SUS 321HX12CrNiTi18-9 SS 321/321H Tube To Union Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.