logo
logo
Sign in

Stainless Steel 410 Angle Manufacture

avatar
sheet plates
Stainless Steel 410 Angle Manufacture

Sachiya Steel International is one of the well-known Manufacture and Exporter of Stainless Steel 410 Angle, which is also characterized by high ductility and impact strength. Stainless Steel 410 Angle is an austenitic stainless steel offering an excellent resistance to inter – granular corrosion following exposure to temperatures in the chromium carbide precipitation range from 800 Degree to 1500 Degree F. Stainless Steel 410 C-Channel is well suited for applications related to chemical processing, heat exchangers, desalinization and more. With its high levels of chromium, molybdenum, and nitrogen, Stainless Steel 410 H-Beam has excellent resistance to a wide range of chemicals.

Stainless Steel 410 I-Beam is especially suited for high chloride environments such as brackish water, seawater, pulp mill bleach plants and other high chloride process gicstreams. Stainless Steel 410 T-Beam provides a cost – efficient alternative to nickel – based alloys and titanium. Stainless Steel 410 Chain is alloyed with columbium – tantalum (referred to as niobium) and therefore allows good mechanical properties at high temperatures.

Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle

410 Stainless Steel Angle is known for their good thermal & electrical conductivities, high density, high melting point, and greater stiffness than steel. These characteristics make 410 Stainless Steel Chain the ideal alloy for use in high temperatures, above 1100 Degree C , which is higher than steels and nickel – based super alloys. 410 Stainless Steel H-Beam has a very low carbon content, which means there is very little risk of carbide precipitation during heating.

 

SS 410 Angle, Channel, Beam, Chain Specifications

Specifications : ASTM A 276/A 276M,A 484/A 484M,A 564/A 564M,A 582/A582M,A 638 /A 638M,A705/A705M
Dimensions : EN, DIN, JIS, ASTM, BS, ASME, AISI
SS 410 Angle
: 5mm to 9mm
SS 410 Channel
: 40mm*20mm~300mm*300mm
SS 410 Beam : 3″ thru 12.31″
SS 410 Chain
: 1/8 inch – 1/2 inch Diameter
Thickness
: 3.0mm – 120mm
Length : 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes
Type : Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain

 

410 Stainless Steel Angle, Channel, Beam, Chain Chemical Composition

Grade C Mn Si P S Cr Cb Ni Fe
SS 410 0.15 max 1 max 1 max 0.040 max 0.030 max 11.5-13.5 0.75

Stainless Steel 410 Angle, Channel, Beam, Chain Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
    MPa – 480  MPa – 275  

Equivalent Grades for 410 Stainless Steel Angle, Channel, Beam, Chain

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
SS 410 1.4006 S41000 SUS 410

 

SS 410 Angle, Channel, Beam, Chain Application Industries

  • Off-Shore Oil Drilling Companies
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
  • Pharmaceutical Equipment
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
collect
0
avatar
sheet plates
guide
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more