Sachiya Steel International is one of the pioneers Manufacture and Exporter for Stainless Steel 904L Angle, which is used to maintain an austenitic composition at lower temperatures. Stainless Steel 904L Angle is a group of austenitic stainless steels with superior corrosion resistance to SS 304. Stainless Steel 904L C-Channel is suitable for welding because it has carbon content lower than 301 to 303 series alloys to avoid carbide precipitation in welding applications. Stainless Steel 904L H-Beam is used for equipment in the chemical, food, paper, mining, and pharmaceutical and petroleum industries, and are also well suited for fabricated or formed applications.
Stainless Steel 904L I-Beam also offer higher creep, stress – to – rupture and tensile strength at elevated temperatures, excellent corrosion resistance and strength properties. Stainless Steel 904L T-Beam is the lower carbon version of 904 and is immune from sensitization; therefore, it is very frequently used in heavy gauge welded components. It is considered resistant to pitting corrosion in potable water with up to about 1000 mg / L chlorides at ambient temperatures, reducing to about 300 mg / L at 60 Degree C.
Stainless Steel 904L Angle | Stainless Steel 904L Angle | Stainless Steel 904L Angle | Stainless Steel 904L Angle | Stainless Steel 904L Angle | Stainless Steel 904L Angle | Stainless Steel 904L Angle | Stainless Steel 904L Angle | Stainless Steel 904L Angle
Stainless Steel 904L Chain has good oxidation resistance in intermittent service to 870 Degree C and in continuous service to 925 Degree C. The addition of molybdenum and slightly higher nickel content make these 904L Stainless Steel Angle suitable for architectural applications in severe settings, from polluted marine environments to areas with sub-zero temperatures.
SS 904L Angle, Channel, Beam, Chain Specifications |
||
| Specifications | : | ASTM A 276/A 276M,A 484/A 484M,A 564/A 564M,A 582/A582M,A 638 /A 638M,A705/A705M |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| SS 904L Angle |
: | 5mm to 9mm |
| SS 904L Channel |
: | 40mm*20mm~300mm*300mm |
| SS 904L Beam | : | 3″ thru 12.31″ |
| SS 904L Chain |
: | 1/8 inch – 1/2 inch Diameter |
| Thickness |
: | 3.0mm – 120mm |
| Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
| Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
904L Stainless Steel Angle, Channel, Beam, Chain Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Cu |
| SS 904L | 0.020 max | 2 max | 1 max | 0.040 max | 0.030 max | 19.0-23.0 | 4.0-5.0 max | 23.00 – 28.00 | 1.0-2.0 |
Stainless Steel 904L Angle, Channel, Beam, Chain Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.95 g/cm3 | 1350 °C (2460 °F) | Psi – 71000 , MPa – 490 | Psi – 32000 , MPa – 220 | 35% |
Equivalent Grades for 904L Stainless Steel Angle, Channel, Beam, Chain
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | KS | AFNOR | EN |
| SS 904L | 1.4539 | N08904 | SUS 904L | 904S13 | STS 317J5L | Z2 NCDU 25-20 | X1NiCrMoCu25-20-5 |
SS 904L Angle, Channel, Beam, Chain Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the well-established Manufacture and Exporter for Stainless Steel 904L Wire Mesh, which is a harden able high – carbon chromium steel.
When put under heat treatment, Stainless Steel 904L Hexagonal Wire Mesh attains the highest hardness levels of any grade of stainless steel.
Resistance to sulphuric acid is particularly exceptional, but Stainless Steel 904L Welding Wire Mesh shows useful resistance in phosphoric acid, nitric acid as well as in chloride environments.
SS 904L Netting Wire Mesh has good mechanical properties at both ambient and elevated temperatures, up to approximately 930 Degree F (500 Degree C) and is readily fabricated by usual industrial processes.Stainless Steel 904L Woven Wire Mesh is composed of carbon, chromium, copper, iron, manganese, molybdenum, nickel, phosphorous, silicon, and Sulphur.
Application of SS 904L Spring Steel Wire Mesh could result in real cost savings when carefully compared to higher – cost alloys to determine if the necessary resistance is obtained in the chosen media.
Post weld heat treatment of SS 904L Fencing Wire Mesh may not be required for use in some corrosive environments due to resistance to inter – granular corrosion in the as-welded condition.
Sachiya Steel International is one of the well-known Manufacture and Exporter of Stainless Steel 410 Angle, which is also characterized by high ductility and impact strength.
Stainless Steel 410 Angle is an austenitic stainless steel offering an excellent resistance to inter – granular corrosion following exposure to temperatures in the chromium carbide precipitation range from 800 Degree to 1500 Degree F. Stainless Steel 410 C-Channel is well suited for applications related to chemical processing, heat exchangers, desalinization and more.
With its high levels of chromium, molybdenum, and nitrogen, Stainless Steel 410 H-Beam has excellent resistance to a wide range of chemicals.Stainless Steel 410 I-Beam is especially suited for high chloride environments such as brackish water, seawater, pulp mill bleach plants and other high chloride process gicstreams.
Stainless Steel 410 T-Beam provides a cost – efficient alternative to nickel – based alloys and titanium.
Stainless Steel 410 Chain is alloyed with columbium – tantalum (referred to as niobium) and therefore allows good mechanical properties at high temperatures.Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle | Stainless Steel 410 Angle410 Stainless Steel Angle is known for their good thermal & electrical conductivities, high density, high melting point, and greater stiffness than steel.
These characteristics make 410 Stainless Steel Chain the ideal alloy for use in high temperatures, above 1100 Degree C , which is higher than steels and nickel – based super alloys.
Sachiya Steel International is one of the pioneer Manufacture and Exporter for Stainless Steel 904L Threaded Forged Fittings, which have excellent resistance to warm seawater and chloride attack.
The corrosion resistance properties of Stainless Steel 904L Forged Threaded Elbow are not as good as the 18 – 8 chromium – nickel steels and its susceptibility to carbide precipitation during welding restricts its use in many applications.
The mechanical properties for the different tempers of Stainless Steel 904L Forged Threaded Tee are obtained by cold working and not by heat treating.Stainless Steel 904L Forged Threaded Cross has a minimum tensile strength and is used in the fabrication of parts that require moderate drawing or forming.
Stainless Steel 904L Forged Threaded Cap is a non – stabilized austenitic stainless steel with low carbon content.
This high alloy Stainless Steel 904L Forged Threaded Fittings/ is added with copper to improve its resistance to strong reducing acids, such as sulphuric acid.
Stainless Steel 904L Forged Threaded Coupling is also resistant to stress corrosion cracking and crevice corrosion.Stainless Steel 904L Threaded Forged Fittings | Stainless Steel 904L Threaded Forged Fittings | Stainless Steel 904L Threaded Forged Fittings | Stainless Steel 904L Threaded Forged Fittings | Stainless Steel 904L Threaded Forged Fittings | Stainless Steel 904L Threaded Forged Fittings | Stainless Steel 904L Threaded Forged FittingsStainless Steel 904L Forged Threaded Union is non – magnetic, and offers excellent formability, toughness and weldability.
Sachiya Steel International is one of the pioneer Manufacture and Exporter for Stainless Steel 904L Threaded Forged Fittings, which have excellent resistance to warm seawater and chloride attack.
The corrosion resistance properties of Stainless Steel 904L Forged Threaded Elbow are not as good as the 18 – 8 chromium – nickel steels and its susceptibility to carbide precipitation during welding restricts its use in many applications.
The mechanical properties for the different tempers of Stainless Steel 904L Forged Threaded Tee are obtained by cold working and not by heat treating.Stainless Steel 904L Forged Threaded Cross has a minimum tensile strength and is used in the fabrication of parts that require moderate drawing or forming.
Stainless Steel 904L Forged Threaded Cap is a non – stabilized austenitic stainless steel with low carbon content.
This high alloy Stainless Steel 904L Forged Threaded Fittings/ is added with copper to improve its resistance to strong reducing acids, such as sulphuric acid.Stainless Steel 904L Threaded Forged Fittings | Stainless Steel 904L Threaded Forged Fittings | Stainless Steel 904L Threaded Forged Fittings | Stainless Steel 904L Threaded Forged Fittings | Stainless Steel 904L Threaded Forged Fittings | Stainless Steel 904L Threaded Forged Fittings | Stainless Steel 904L Threaded Forged FittingsStainless Steel 904L Forged Threaded Coupling is also resistant to stress corrosion cracking and crevice corrosion.
Stainless Steel 904L Forged Threaded Union is non – magnetic, and offers excellent formability, toughness and weldability.
Sachiya Steel International is one of the prominent Manufacture and Exporter for Stainless Steel 904L Tube to Female Pipes, which as well resists general corrosion by many aqueous media.
Because of its lower carbon – content, our Stainless Steel 904L Tube Fittings minimizes carbide precipitation, and improves weldability.
The protective oxide film of these Stainless Steel 904L Compression Fittings which is formed is adherent in both static and cyclic conditions of heating and cooling, and resistance to carburization is enhanced when a thin film of oxide is being formed on the alloy through pre – oxidation prior to service.Chromium carbides precipitate in our Stainless Steel 904L Female Connector Fittings at temperatures between 1000 Degree F and 2000 Degree F (540 Degree C and 1095 Degree C).
These Stainless Steel 904L Ferrule Tube Fittings has good rupture and creep strength and excellent resistance to oxidation, carburization and sulfidation at temperatures up to 816 Degree C.Stainless Steel 904L Tube to Female Pipes | Stainless Steel 904L Tube to Female Pipes | Stainless Steel 904L Tube to Female Pipes | Stainless Steel 904L Tube to Female Pipes | Stainless Steel 904L Tube to Female Pipes | Stainless Steel 904L Tube to Female Pipes | Stainless Steel 904L Tube to Female Pipes Consequently, our Stainless Steel 904L Double Ferrule Tube Fittings are similar to other austenitic alloys in that they can be rendered susceptible to inter – granular corrosion (sensitized) in certain aggressive environments by exposure to temperatures of 1000 Degree F to 1400 Degree F (540 Degree C – 760 Degree C).
Resistance to hydrogen of these 904L Stainless Steel Female Connector Fittings is excellent and standard materials used in the production of hydrogen in steam / hydrocarbon reforming processes.
Stainless Steel 904L Tube to Female Pipes SpecificationsSpecifications:ASTM A276 ASME SA 479Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Stainless Steel, 300/1000/3000PSI for Brass 904L Stainless Steel Tube to Female Pipes Fitting Chemical Composition GradeCMnSiPSCrMoNiN904Lmin.–––––19.04.0023.000.10max.0.202.001.000.0450.03523.05.0028.000.25 Stainless Steel 904L Tube to Female Pipes Fitting Mechanical Properties GradeTensile Strength (MPa) minYield Strength 0.2% Proof (MPa) minElongation (% in 50mm) minHardnessRockwell B (HR B) maxBrinell (HB) max904L4902203570-90 typical– Stainless Steel 904L Tube to Female Pipes Fitting Physical Properties GradeDensity (kg/m3)Elastic Modulus (GPa)Mean Coefficient of Thermal Expansion (m/m/0C)Thermal Conductivity (W/m.K)Specific Heat 0-1000C (J/kg.K)Electrical Resistivity (n.m)0-1000C0-3150C0-5380Cat 1000Cat 5000C904L800020015.0––13.0–500850 Equivalent Grades for 904L Stainless Steel Tube to Female Pipes Fitting GradeUNS NoOld BritishEuronormSwedish SSJapanese JISBSEnNoName904LN08904904S13X1NiCrMoCu25-20-51.4539––SUS 890L SS 904L Tube to Female Pipes Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry
