Sachiya Steel International is one of the well-known Manufacture and Exporter of quality Monel Alloy 400 Wire Mesh, where maximum attainable surface hardness depends primarily on carbon content. However, content alloying elements of Monel 400 Hexagonal Wire Mesh influence the overall characteristics, where these alloying elements primarily influence hardenability. Maximum hardness and strength in small sections of Monel 400 Welding Wire Mesh increase as carbon content increases, up to about 0.7 %. Contents in Monel 400 Netting Wire Mesh greater than 0.3 % can increase the possibility of cracking during quenching or welding.
Monel 400 Woven Wire Mesh also influences other mechanical and fabrication properties including toughness and machinability. Monel 400 Spring Steel Wire Mesh is often specified when high strength is needed in moderate – to – large sections. Whether tensile or yield strength is the basis of design, thermally treated Monel 400 Fencing Wire Mesh generally offer high strength – to – weight ratios.
For applications requiring maximum ductility, Alloy 400 Hexagonal Wire Mesh with low Sulphur levels can be supplied by producers using ladle – refining techniques. The low carbon in Alloy 400 Welding Wire Mesh provides resistance to sensitization during welding and other thermal processes. Alloy 400 Netting Wire Mesh does not perform well in chloride solutions, even in small concentrations, or in sulphuric acid. In general, wear resistance can be improved by increasing the hardness of Alloy 400 Woven Wire Mesh, by specifying an alloy with greater carbon content (without increasing hardness), or by both.
|
Monel 400 Wire mesh Specifications
|
||
| Specifications | : | ASTM / ASME B164 / SB164 |
| Standard | : | ASTM, ASME |
| Size | : | 15NB to 150NB In |
| Types | : | Wire Mesh, Hexagonal Wire mesh, Welding Wire mesh, Netting Wire mesh, Woven Wire mesh, Spring Steel wire mesh, Fencing Wire mesh etc. |
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Monel 400 | 0.30 max | 2.00 max | 0.50 max | 0.24max | 28.0-34.0 | 2.50 max | 63.00 min | – |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Monel 400 | 8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80,000 , MPa – 550 | Psi – 35,000 , MPa – 240 | 40 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | |
| Monel 400 | 2.4360 | N04400 | NW 4400 | NA 13 | МНЖМц 28-2,5-1,5 | NU-30M | NiCu30Fe |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the Leading Manufacture And Exporter of quality Monel Alloy 400 Wire , which is in fact used most commonly in high temperature brazing applications.
Our Monel 400 Wire is generally being used when specifications call for corrosion resistance and high – temperature service properties.
This Monel 400 Coil Wire can also be used in sub – zero applications as low as the temperature of liquid oxygen, helium, or nitrogen.
Nickel brazing alloys have low vapor pressure, making our Monel 400 Welding Wire suited to vacuum systems and vacuum tube applications.With their joint strength and resistance to corrosion, this nickel brazing Monel 400 Electrode is ideal for jet engine parts and assemblies, food handling equipment, nuclear energy and carbide tools.
Our Monel 400 Welding can only be hardened by further rolling, while showing excellent corrosion resistance, which is higher than that of pure nickel in reduced environments and better than that of copper in oxidizing environments.This Alloy 400 Electrode is a solid solution alloy that can be hardened by the process of cold working.
Our Alloy 400 Filler Wire is also known as super alloy, where series of nickel – copper alloys are grouped.
Sachiya Steel International is one of the well-known Manufacture and Exporter of quality Monel Alloy 400 Angle And Other Monel Products , which combines excellent corrosion resistance with elevated mechanical properties and relatively easy fabrication.
Applications of Monel 400 Angle are limited to a maximum temperature of 1000 Degree F per ASME.
Monel 400 C-Channel is often chosen to solve SCC problems, which may occur with 316L stainless.
Monel 400 H-Beam was designed for maximum resistance to acid attack and demonstrates superior resistance to stress – corrosion cracking in boiling sulphuric acid.Monel 400 I-Beam also has excellent general corrosion resistance to sulphuric acid and to chloride stress corrosion cracking.
Monel 400 T-Beam can be used for a wide variety of applications including: control valves, pressure relief valves, and centrifugal pumps.
Alloy 400 Angle has minimal carbide precipitation during welding and excellent mechanical properties and fabricability is excellent design features.
Sachiya Steel International is one of the leading manufacturer and exporter of Monel Alloy 400 Threaded Forged Fittings, which has some excellent features to offer such as precise dimensions, resistant to corrosion, free from any kind of maintenance, and more.
Our Monel 400 Forged Threaded Bushing (UNS N04400) does work – harden during machining and has higher strength and “gumminess” not typical of steels.
These Monel 400 Forged Threaded Plug are nickel – based alloys that contain between 29 percent and 34 percent of copper.Although the grade can be tempered or cold worked to increase its properties, our Monel 400 Forged Threaded Cap is supplied in the annealed condition as standard.
The conventional machining techniques used on iron alloys may perhaps be used for these Monel 400 Forged Threaded Elbow Forged.
Meanwhile, our Monel 400 Forged Threaded Coupling are also being offered in different sizes and shapes to our customers.Monel Alloy 400 Threaded Forged Fittings | Monel Alloy 400 Threaded Forged Fittings | Monel Alloy 400 Threaded Forged Fittings | Monel Alloy 400 Threaded Forged Fittings | Monel Alloy 400 Threaded Forged Fittings | Monel Alloy 400 Threaded Forged Fittings | Monel Alloy 400 Threaded Forged Fittings | Monel Alloy 400 Threaded Forged FittingsThese Monel 400 Forged Threaded Tee are often known as nickel and chromium alloys, nickel – chromium – iron alloys as well as nickel and molybdenum alloys which are alloys associated with high – temperature resistant properties.
Our Monel 400 Forged Threaded Union is being used for marine engineering, chemical and hydrocarbon processing equipment, valves, pumps, shafts, fittings, fasteners, and heat exchangers.
