Sachiya Steel International is known Manufacture and Exporter of Incoloy 330 Angle And Incoloy Other Products , where heavy lubricants work best for drilling, tapping, boring or broaching. Incoloy 330 Angle is hardened by heat treatment and cold working, which has a high level of corrosion resistance. Our focus on the production of high quality Incoloy 330 C-Channel is at competitive pricing has allowed us to become an industry leader. Incoloy 330 H-Beam is often used in valves, fasteners, tubing hangers, springs, mandrels, etc.
Incoloy 330 I-Beam is also used for surface and down-hole hardware in sour gas wells and for oil – production equipment. Incoloy 330 T-Beam can be age – hardened by adding aluminum and titanium. Incoloy 330 Chain offers comparable corrosion resistance to its sister alloy Incoloy 825 Chain, but with the increased strength resulting from the age hardening process.
Incoloy 330 Angle | Incoloy 330 Angle | Incoloy 330 Angle | Incoloy 330 Angle | Incoloy 330 Angle | Incoloy 330 Angle | Incoloy 330 Angle | Incoloy 330 Angle | Incoloy 330 Angle | Incoloy 330 Angle
On the other hand, molybdenum and copper in Alloy 330 Angle are added to increase its resistance to corrosive media. High – speed steel tooling in Alloy 330 C-Channel should be used for interrupted cuts and for smooth finishing and closing tolerance. Alloy 330 H-Beam can as well be used in high – strength piping systems and petroleum industry. In both oxidizing and reducing environments, Alloy 330 I-Beam resists general corrosion, pitting, crevice corrosion, inter – granular corrosion and stress – corrosion cracking. Alloy 330 T-Beam is generally used in gas turbine engine parts, well head completion equipment and blow out preventers (BOP’s).
Incoloy 330/SS 330/Ra 330 Angle, Channel, Beam, Chain Specifications |
||
| Specifications | : | ASTM B511 / ASME B511 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Incoloy 330 Angle |
: | 5mm to 9mm |
| Incoloy 330 Channel |
: | 40mm*20mm~300mm*300mm |
| Incoloy 330 Beam | : | 3″ thru 12.31″ |
| Incoloy 330 Chain |
: | 1/8 inch – 1/2 inch Diameter |
| Thickness |
: | 3.0mm – 120mm |
| Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
| Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
330/SS 330/Ra 330 Incoloy Angle, Channel, Beam, Chain Chemical Composition
| Grade | C | Mn | Si | Mo | S | Cr | Cu | Ni | P |
| Incoloy 330/SS 330/Ra 330 | 0.08 max | 2.00 max | 0.75 – 1.50 | 1.00 – 1.75 | 0.03 max | 17.0 -20.0 | 1.00 max | 34.0 -37.0 | 0.03 max |
Equivalent Grades for 330/SS 330/Ra 330 Incoloy Angle, Channel, Beam, Chain
| STANDARD | WERKSTOFF NR. | UNS |
| Incoloy 330 / SS 330 /Ra 330 | 1.4886 | N08330 |
Incoloy 330/SS 330/Ra 330 Angle, Channel, Beam, Chain Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas ProceIncoloying
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International offers a widespread collection of Incoloy 330 Plate and Coils to the customers, which has some outstanding features such as optimum performance, durable finish and precisely engineered.
The high chromium and nickel content of Incoloy 330 Sheets offer excellent resistance to carburization and oxidation.
Oxidation resistance and Carburization to approximately 2100 Deg F are improved by the content of silicon of these Incoloy 330 Plates.The austenitic microstructure of Incoloy 330 Coils rests stable throughout long – time exposure to soaring temperature.
SS 330 Sheets (UNS N08330) is welded effortlessly by all conventional procedures.
SS 330 Coils is actually an austenitic, nickel – chromium – iron – silicon alloy that has outstanding resistance to oxidation and carburization up to 2200 Degree F with high strength.Incoloy 330 Plate | Incoloy 330 Plate | Incoloy 330 Plate | Incoloy 330 Plate | Incoloy 330 Plate | Incoloy 330 Plate | Incoloy 330 Plate | Incoloy 330 PlateRa 330 Sheets also has excellent anti – corrosion and oxidation properties.
Slow speeds, positive feeds, sulphureted lubricants and rigid mounts are generally recommended for Ra 330 Coils.
Sachiya Steel International is offering Incoloy 330 Wire to the clients, which is a patented alloy designed specifically for the heat treat industry.
This Incoloy 330 Wire is an austenitic nickel – iron – chromium alloy developed to provide excellent resistance to carburizing and oxidizing atmospheres at elevated temperatures.
Our SS 330 Wire combines excellent resistance to carburization and oxidation at temperatures up to 2200 Degree F (1200 Degree C) with high strength.Many factors go into the selection of this Ra 330 Coil Wire, including availability, versatility to function and resistance to a range of oxidizing and reducing atmospheres common in heat treating.
Our Incoloy 330 Wire is a unique combination of various different metal which combine to form one sturdy alloy out of which sheets are manufactured.
The excellent weldability of this SS 330 Electrode and its ability is to be joined very successfully to other alloys by means of different compositions.The high nickel and chromium of our Ra 330 Welding Electrode provide good resistance to oxidation and carburization.
We can also appoint official certified Inspection Agencies upon request of our clients so that they can witness the material reports, dimensions and quality conformity of our Alloy 330 Wire.
Sachiya Steel International offers a wide range of Incoloy 825 Angle, which are often used in Chemical process vessels and Catalytic cracking units.
The nickel content in our Incoloy 825 Angle provides resistance to chloride – ion stress corrosion cracking, where carbide tools are recommended for turning with a continuous cut.
A variety of media corrosion of nuclear – burning dissolver show this Incoloy 825 C-Channel high integrated property, such as sulfuric acid, potassium hydroxide and nitric acid are all dealing in a same device.Our Incoloy 825 H-Beam is not necessary to preheat, but surfaces to be welded must be clean from paint, oil or crayon markings and any residual lubricants used in the forming process.
For maximum corrosion resistance in this Incoloy 825 I-Beam, hot worked parts should be stabilizing annealed before use.
The chromium and molybdenum content of our Incoloy 825 T-Beam provides resistance to chloride pitting, as well as resistance to a variety of oxidizing atmospheres.Incoloy 825 Angle | Incoloy 825 Angle | Incoloy 825 Angle | Incoloy 825 Angle | Incoloy 825 AngleThis Incoloy 825 Chain has good mechanical properties from cryogenic temperatures to moderately high temperatures.
The following properties are applicable to our Alloy 825 Angle at room and elevated temperatures in the annealed respectively stabilized temper and indicated size ranges.
Sachiya Steel International Is a Leading Manufacture And Exporter of Incoloy 330 Threaded Forged Fittings to the clients, where we assure our clients that a quality array is delivered from our end.
Incoloy 330 Forged Threaded Elbow (UNS N08330) is extensively used in high temperature environments where resistance to the combine effects of thermal cycling and carburization is necessary.
The oxidation resistance of Incoloy 330 Forged Threaded Tee is enhanced by the silicon content.
Incoloy 330 Forged Threaded Cross was designed for applications in high temperature industrial environments where good resistance to the combined effects of carburization and thermal cycling are required, such as the heat treat industry.
Meanwhile, these Incoloy 330 Forged Threaded Cap are also being offered in different sizes and shapes to our customers.
Forged parts of Incoloy 330 Forged Threaded Fittings should be cooled as quickly as possible, and for best corrosion resistance post – forge annealing is recommended.Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged Fittings | Incoloy 330 Threaded Forged FittingsThe main reason being we have an excellent warehousing and storage facilities for both finished and semi – finished Incoloy 330 Forged Threaded Coupling in the heart of financial capital of the country, where they are further made ready as per the urgent requirements of the customers.
Sachiya Steel International offers an extensive array of Incoloy 330 Tube to Female Pipes to the clients, which has a low coefficient of expansion, excellent ductility, and high strength.
In fact, the work hardening rate of Inconel 330 Tube Fittings is similar to that of stainless steel 305.
Inconel 330 Compression Fittings performs well under cyclic conditions of heating and cooling and in alternate carburizing and oxidizing atmospheres.
Due to its relatively high strength and work hardening rate, Inconel 330 Female Connector Fittings is more difficult to cold form than standard 18 – 8 stainless steels.In general, nickel alloys except alloy 600 outperform Ra 330 Female Connector Fittings in creep strength, which are further often encountered in extreme environments.
SS 330 Female Connector Fittings is often used in Off – Shore Oil Drilling Companies, Petrochemicals, Power Generation and more.
Carburization and oxidation resistance of Ra 330 Tube Fittings to 2100 Degree F (1148 Degree C) are enhanced by a nominal 1.25 % silicon addition.Incoloy 330 Tube to Female Pipes | Incoloy 330 Tube to Female Pipes | Incoloy 330 Tube to Female Pipes | Incoloy 330 Tube to Female Pipes | Incoloy 330 Tube to Female Pipes | Incoloy 330 Tube to Female Pipes | Incoloy 330 Tube to Female Pipes | Incoloy 330 Tube to Female Pipes | Incoloy 330 Tube to Female Pipes | Incoloy 330 Tube to Female PipesSS 330 Tube Fittings are also used in the following applications: Furnaces, muffles, retorts and conveyor systems; Industrial heating; Heat treating baskets and fixtures.
