Sachiya Steel International is among renowned Manufacture And Exporter for Stainless Steel 304H Threaded Forged Fittings, which should be heated to 1900 Degree F minimum and water quenched or rapidly cooled by other means. The high Sulphur content of Stainless Steel 304H Forged Threaded Elbow also has a detrimental impact on hot workability. If hot forming is required, once again, Stainless Steel 304H Forged Threaded Tee should be considered as an alternate selection. The cold work hardening rate of Stainless Steel 304H Forged Threaded Cross makes it less machinable than 410 stainless steel, but similar to 304.
It is common for Stainless Steel 304H Forged Threaded Cap to be dual certified as 317 and 317L when the material meets the lower carbon limit of SS 317L. Avoid working Stainless Steel 304H Forged Threaded Fittings below 1700 Degree F (927 Degree C). For optimum corrosion resistance, a post – work annealing of Stainless Steel 304H Forged Threaded Coupling is recommended.
Stainless Steel 304H Threaded Forged Fittings | Stainless Steel 304H Threaded Forged Fittings | Stainless Steel 304H Threaded Forged Fittings | Stainless Steel 304H Threaded Forged Fittings | Stainless Steel 304H Threaded Forged Fittings | Stainless Steel 304H Threaded Forged Fittings | Stainless Steel 304H Threaded Forged Fittings
Stainless Steel 304H Forged Threaded Union may be formed and fabricated through a full range of cold working operations. It can be used in heading, drawing, bending, and upsetting. Any cold working operations of Stainless Steel 304H Forged Threaded Bushing will increase the strength and hardness of the material. Stainless Steel 304H Forged Threaded Plug is a tough austenitic stainless steel subject to work hardening during deformation and is resistant to chip breaking.
Stainless Steel 304H Forged Threaded Fittings Specifications |
||
| Specifications | : | ASTM A182 & ASME SA182 |
| Size | : | 1/8” NB to 4” NB (Socket weld & Screwed-Threaded) |
| Standards |
: | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Class | : | 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
| Type | : | Threaded Fittings |
SS 304H Forged Fittings Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 304H | 0.10 max | 2 max | 0.75 max | 0.045 max | 0.030 max | 18 – 20 | – | 8 – 10.5 | – |
Stainless Steel 304H Threaded Fitting Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40 % |
Equivalent Grades for 304H Stainless Steel Forged Fittings
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 304H | 1.4301 | S30409 | – | – | – | – | – |
Stainless Steel 304H Forged Fittings Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is Leading Manufacturer And Exporter for Stainless Steel 304H Threaded Forged Fittings, which should be heated to 1900 Degree F minimum and water quenched or rapidly cooled by other means.
The high Sulphur content of Stainless Steel 304H Forged Threaded Elbow also has a detrimental impact on hot workability.
If hot forming is required, once again, Stainless Steel 304H Forged Threaded Tee should be considered as an alternate selection.
The cold work hardening rate of Stainless Steel 304H Forged Threaded Cross makes it less machinable than 410 stainless steel, but similar to 304.It is common for Stainless Steel 304H Forged Threaded Cap to be dual certified as 317 and 317L when the material meets the lower carbon limit of SS 317L.
Avoid working Stainless Steel 304H Forged Threaded Fittings below 1700 Degree F (927 Degree C).
For optimum corrosion resistance, a post – work annealing of Stainless Steel 304H Forged Threaded Coupling is recommended.
Sachiya Steel International is a Leading Manufacture And Exporter of Alloy Steel F1 Threaded Forged Fittings, which are designed for high hardness and at times other properties are to some degree compromised.
The dual stabilization in these Alloy Steel F1 Forged Threaded Elbow Fittings prevents carbide sensitization during welding and high temperature exposure, and makes the alloy non harden able by heat treatment.
Most compositions of our Alloy Steel F1 Forged Threaded Tee Fittings include molybdenum; some, aluminum or titanium.
Corrosion resistance in these Alloy Steel F1 Forged Threaded Cross Fittings is lower than the common austenitic grades.As a result, useful operating range of our Alloy Steel F1 Forged Threaded Cap Fittings is limited by their loss of ductility at sub – zero temperatures and loss of strength by over – tempering at elevated temperatures.
These Alloy Steel F1 Forged Threaded Bend Fittings may not to be confused with AISI grade and air hardening alloy tool steel containing about 5 % chromium.Alloy Steel F1 Threaded Forged Fittings | Alloy Steel F1 Threaded Forged Fittings | Alloy Steel F1 Threaded Forged Fittings | Alloy Steel F1 Threaded Forged Fittings | Alloy Steel F1 Threaded Forged Fittings | Alloy Steel F1 Threaded Forged Fittings | Alloy Steel F1 Threaded Forged FittingsA typical composition of 18 % chromium and 10 % nickel in our Alloy Steel F1 Forged Threaded Coupling Fittings, commonly known as 18 / 10 alloy, is often used in cutlery and high – quality cookware.
The second most common austenite steel is these Alloy Steel F1 Forged Threaded Union Fittings, also referred to as excellent alloy and called as marine grade alloy, used primarily for its increased resistance to corrosion.Alloy Steel F1 Threaded Forged Fittings SpecificationsSpecifications:ASTM A182 & ASME SA182Size:1/2″ NB TO 48″ NB.Standards:ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799Class:2000 LBS, 3000 LBS, 6000 LBS, 9000 LBSType:Threaded Forged FittingsAlloy Steel F1 Threaded Forged Fittings Chemical CompositionGradeCMnSiSPCrMoAlloy Steel F10.15 max0.3-0.60.50.030.034-60.44-0.65Alloy Steel Grade F1 Threaded Forged Fitting Mechanical PropertiesTensile StrengthYield Strength (0.2%Offset)Elongation27548520 %Alloy Steel F1 Threaded Forged Fittings Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 316Ti Flanges, which shows resistance against acid corrosion in a variety of environments.
Lower temperatures provide better resistance, but Stainless Steel 316Ti Slip On Flanges is able to withstand up to a 10 % acid solution, that has been diluted, at elevated temperatures.
However, Stainless Steel 316Ti Long Weld Neck Flanges shows very little resistance against chlorine or sulfuric solutions at any given temperature.
Given their similar composition and characteristics, it is possible for Stainless Steel 316Ti Spacer Flanges to become dually certified.
This metal intensifies Stainless Steel 316Ti Threaded Flanges present ability to withstand intergranular corrosion for maximum capabilities.Additionally, the columbium allows for our Stainless Steel UNS S31635 Weld Neck Flanges to undergo repeated heating in temperatures up to 1650 Degree F. As a result, Stainless Steel 316Ti Blind Flanges is commonly applied to high temperature equipment, such as gaskets and expansion joints, along with rocket engine and chemical manufacturing.
In addition to its heat resistance properties, our Stainless Steel 316Ti Socket Weld Flanges also enjoys better resistance against creep and stress rupture corrosions.Stainless Steel 316Ti Flanges | Stainless Steel 316Ti Flanges | Stainless Steel 316Ti Flanges |Stainless Steel 316Ti Flanges | Stainless Steel 316Ti Flanges | Stainless Steel 316Ti Flanges | Stainless Steel 316Ti FlangesThis is another advantage of Stainless Steel 316Ti Lap Joint Flanges, as its characteristics may be better suited for environments where stabilization is a primary concern.