Sachiya Steel International is Leading Manufacturer And Exporter for Stainless Steel 304H Threaded Forged Fittings, which should be heated to 1900 Degree F minimum and water quenched or rapidly cooled by other means. The high Sulphur content of Stainless Steel 304H Forged Threaded Elbow also has a detrimental impact on hot workability. If hot forming is required, once again, Stainless Steel 304H Forged Threaded Tee should be considered as an alternate selection. The cold work hardening rate of Stainless Steel 304H Forged Threaded Cross makes it less machinable than 410 stainless steel, but similar to 304.
It is common for Stainless Steel 304H Forged Threaded Cap to be dual certified as 317 and 317L when the material meets the lower carbon limit of SS 317L. Avoid working Stainless Steel 304H Forged Threaded Fittings below 1700 Degree F (927 Degree C). For optimum corrosion resistance, a post – work annealing of Stainless Steel 304H Forged Threaded Coupling is recommended. Stainless Steel 304H Forged Threaded Union may be formed and fabricated through a full range of cold working operations.
Stainless Steel 304H Threaded Forged Fittings | Stainless Steel 304H Threaded Forged Fittings | Stainless Steel 304H Threaded Forged Fittings | Stainless Steel 304H Threaded Forged Fittings | Stainless Steel 304H Threaded Forged Fittings | Stainless Steel 304H Threaded Forged Fittings
Contents [hide]
It can be used in heading, drawing, bending, and upsetting. Any cold working operations of Stainless Steel 304H Forged Threaded Bushing will increase the strength and hardness of the material. Stainless Steel 304H Forged Threaded Plug is a tough austenitic stainless steel subject to work hardening during deformation and is resistant to chip breaking.
|
Stainless Steel 304H Forged Threaded Fittings Specifications
|
||
| Specifications | : | ASTM A182 & ASME SA182 |
| Size | : | 1/8” NB to 4” NB (Socket weld & Screwed-Threaded) |
| Standards |
: | ASME 16.11, MSS SP-79, 83, 95, 97, BS 3799 |
| Class | : | 2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS |
| Type | : | Threaded Fittings |
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 304H | 0.10 max | 2 max | 0.75 max | 0.045 max | 0.030 max | 18 – 20 | – | 8 – 10.5 | – |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 304H | 1.4301 | S30409 | – | – | – | – | – |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Email: sales@sachiyasteel.com
For More Information Visit Our Website: Steel Tube
Sachiya Steel International is among renowned Manufacture And Exporter for Stainless Steel 304H Threaded Forged Fittings, which should be heated to 1900 Degree F minimum and water quenched or rapidly cooled by other means.
The high Sulphur content of Stainless Steel 304H Forged Threaded Elbow also has a detrimental impact on hot workability.
If hot forming is required, once again, Stainless Steel 304H Forged Threaded Tee should be considered as an alternate selection.
The cold work hardening rate of Stainless Steel 304H Forged Threaded Cross makes it less machinable than 410 stainless steel, but similar to 304.It is common for Stainless Steel 304H Forged Threaded Cap to be dual certified as 317 and 317L when the material meets the lower carbon limit of SS 317L.
Avoid working Stainless Steel 304H Forged Threaded Fittings below 1700 Degree F (927 Degree C).
For optimum corrosion resistance, a post – work annealing of Stainless Steel 304H Forged Threaded Coupling is recommended.Stainless Steel 304H Threaded Forged Fittings | Stainless Steel 304H Threaded Forged Fittings | Stainless Steel 304H Threaded Forged Fittings | Stainless Steel 304H Threaded Forged Fittings | Stainless Steel 304H Threaded Forged Fittings | Stainless Steel 304H Threaded Forged Fittings | Stainless Steel 304H Threaded Forged Fittings Stainless Steel 304H Forged Threaded Union may be formed and fabricated through a full range of cold working operations.
