Sachiya Steel International is one of the well-established Manufacture and Exporter of quality Nickel Alloy 201 Tube to Female Pipes, which consists of low carbon version of the alloy. Nickel 201 Tube Fittings is associate solid solution heat resistant alloy with wonderful resistance to oxidization underneath gently cyclic conditions through 2000 Degree F. Nickel 201 Compression Fittings is quickly fancied by commonplace industrial procedures. Nickel 201 Female Connector Fittings is compared to steel and unsullied steels that are harder and have a tendency to figure harden speedily.
Nickel 201 Ferrule Tube Fittings is a heat resisting steel with high resistance to oxidization scaling and has high strength at elevated temperatures. Nickel 201 Double Ferrule Tube Fittings may be welded victimization all of the common attachment processes. Alloy 201 Compression Tube Fittings is combined with higher creep properties at temperature and unsullied which is incredibly powerful and ductile. The unsullied of Ni 201 Female Connector Fittings has smart resistance to oxidization and will be employed in continuous service up to 1140 Degree C provided reducing Sulphur gases don’t seem to be gift.
Nickel Alloy 201 Tube to Female Pipes | Nickel Alloy 201 Tube to Female Pipes | Nickel Alloy 201 Tube to Female Pipes | Nickel Alloy 201 Tube to Female Pipes | Nickel Alloy 201 Tube to Female Pipes | Nickel Alloy 201 Tube to Female Pipes | Nickel Alloy 201 Tube to Female Pipes | Nickel Alloy 201 Tube to Female Pipes | Nickel Alloy 201 Tube to Female Pipes
With its high metal content, Nickel 201 Tube Fittings offers smart corrosion resistance to extend warmth properties. The high metal and nickel contents of Nickel 201 Compression Fittings offer comparable corrosion resistance and superior resistance to oxidization and therefore the retention of a bigger fraction of temperature strength than the common solid solution alloys like sort 304.
|
Nickel 201 Tube to Female Pipes Specifications
|
||
| Specifications | : | ASTM B366 ASME SB 366 |
| Size | : | OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″ |
| Thread | : | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Pressure Rating |
: | 3000 – 4000 PSI |
| Applicable Temperature |
: | 150-400 C |
| Type |
: | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting. |
| Nickel 201 | Ni | C | Mo | Mn | Si | Fe | P | S | Cu | Cr |
| Balance | 0.15 max | – | 0.35 max | 0.35 max | 0.40 max | – | 0.01 max | 0.25 max | – |
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 21500 , MPa – 148 | Psi – 67000 , MPa – 462 | 45 % |
| STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
| Nickel 201 | N02201 | 2.4068 | – | LC-Ni 99 | NW 2201 | NA 12 | НП-2 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the Leading Manufacturer And Exporter of quality Nickel Alloy 201 Tube to Union Fittings, which is ferromagnetic.
Our Nickel 201 Tube Fittings are solid solution strengthened, commercially pure wrought materials by means of good mechanical properties over a wide range of temperatures and excellent resistance to many corrosives, in particular hydroxides.
These Nickel 201 Compression Fittings provides high thermal and electrical conductivity in comparison to nickel – base alloys, stainless and low alloy steels.
Our Nickel 201 Union Fittings is not recommended for service above 600 Degree F (316 Degree C) because long – time exposures in the 800 Degree F to 1200 Degree F range result in precipitation of a carbon containing phase and loss of ductility.These Nickel 201 Ferrule Fittings is a modification of Nickel 200 to control carbon which keeps it from being embrittled by inter – granular precipitates at temperatures of 600 Degree F to 1400 Degree F in many processes.
Our Nickel 201 Double Ferrule Fittings also has a high Curie temperature and good magneto strictive properties.
These annealed Alloy 201 Tube Fittings has a low hardness and good ductility and malleability.Nickel Alloy 201 Tube to Union Fittings | Nickel Alloy 201 Tube to Union Fittings | Nickel Alloy 201 Tube to Union Fittings | Nickel Alloy 201 Tube to Union Fittings | Nickel Alloy 201 Tube to Union Fittings | Nickel Alloy 201 Tube to Union Fittings | Nickel Alloy 201 Tube to Union Fittings | Nickel Alloy 201 Tube to Union Fittings | Nickel Alloy 201 Tube to Union Fittings | Nickel Alloy 201 Tube to Union FittingsThese attributes, combined with good weldability, make our Alloy 201 Compression Fittings highly fabricable.
