Sachiya Steel International is one of the prominent Manufacture and Exporter of Brass Tube to Female Pipes, which can also be used in slightly chlorinated and deaerated water. Brass Tube Fittings performs well in oil and gas applications where deaerated and low hydrogen sulphide exist. However, Brass Compression Fittings is prone to chloride attack, particularly in oxidizing conditions. Brass Compression Tube Fittings operates well in environments requiring moderate corrosion resistance and high mechanical properties.
Brass Female Connector Fittings resists oxidation up to 1292 Degree F (700 Degree C) continuously and up to 1500 Degree F (816 Degree C) on an intermittent basis. Brass Ferrule Fittings is typically done in the 1382 Degree F – 2102 Degree F (750 Degree C – 1150 Degree C) range followed by air cooling. For smaller deformation such as bending, preheating of Brass Double Ferrule Fittings should be done in the 212 Degree F – 572 Degree F (100 Degree C – 300 Degree C) temperature range. Brass Ferrule Tube Fittings is best machined in the annealed condition at surface speeds, where post machining decontamination and passivation are recommended.
Brass Tube to Female Pipes | Brass Tube to Female Pipes | Brass Tube to Female Pipes | Brass Tube to Female Pipes | Brass Tube to Female Pipes | Brass Tube to Female Pipes
Brass Double Ferrule Tube Fittings is the basic, general purpose martensitic stainless steel that is used for highly stressed parts and provides good corrosion resistance plus high strength and hardness. Tooling of Brass Tube Fittings should consist of tungsten carbide designations or cobalt type high speed tools.
|
Brass Tube to Female Pipes Specifications
|
||
| Specifications | : | ASTM B135 ASME SB135 / ASTM B36 ASME SB36 |
| Tube Size | : | 6mm to 38mm to 1/4″ to 1 1/2″ |
| Thread | : | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Brass | : | ASTM B16 ASTM B 453 |
| Pressure Rating | : | 6000PSI for Brass, 300/1000/3000PSI |
| Brass | Cu | Fe | Pb | Zn |
| Min./Max. | 60.0-63.0 | 0.35 | 2.5-3.0 | Rem. |
| Nominal | 61.5 | – | 2.7 | 35.4 |
| Properties | US Customary |
| Melting Point -Liquidus | 1650 F |
| Melting Point -Solidus | 1630 F |
| Density | 0.307 lb/in3at 68 F |
| Electrical Resistivity | 39.90 ohms – cmil/ft @ 68 F |
| Electrical Conductivity | 26 %IACS @ 68 F |
| Thermal Conductivity | 67 Btu · ft/(hr · ft2·oF)at 68F |
| Modules of Elasticity in Tension | 14000 ksi |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is a known Manufacture And Exporter of Copper Tube to Female Pipes, which is available in dissimilar sizes, shapes and designs as per demands of our clients.
Fabricated from premium quality metals, Copper Tube Fittings are high in quality and offer long service life.
We are one of the known wholesaler manufacturer exporters and suppliers of products like Copper Compression Fittings in Mumbai, Maharashtra, India.
We focus on excellence and personalized service for Copper Female Connector Fittings to provide the highest quality professional design and installation on heating, ventilation and air conditioning systems.Counted among one of the top manufacturers and suppliers, we are presenting a quality array of Copper Ferrule Fittings to our valued clients.
Keeping in mind the quality of the products, we offer Copper Double Ferrule Fittings in various shapes and sizes as per the requirements of our valuable clients.
We aim towards converting the needs of the clients into reliable technology solutions for Copper Compression Tube Fittings, where the technicians and engineers work in proximity with us.Copper Tube to Female Pipes | Copper Tube to Female Pipes | Copper Tube to Female Pipes | Copper Tube to Female Pipes | Copper Tube to Female Pipes | Copper Tube to Female Pipes We serve Copper Female Connector Tube Fittings for commercial, institutional, and industrial customers, both large and small.
Sachiya Steel International is one of the well-known Manufacture and Exporter of Stainless Steel 316Ti Tube to Female Pipes, which works successfully with most common welding methods with the exception of oxyacetylene.
This Stainless Steel 316Ti Tube Fittings is an iron – base and austenitic alloy with tremendous corrosion resistance to a range of different media.Our Stainless Steel 316Ti Compression Fittings shows to be of a great usage in a number of applications like flue – gas desulfurization, chemical processing, food processing and storage in addition to pharmaceutical applications to mention a few.
Application of this Stainless Steel 316Ti Female Fittings could save cost when carefully compared to higher – cost alloys to decide if the essential resistance is attained in the chosen media.Stainless Steel 316Ti Tube to Female Pipes | Stainless Steel 316Ti Tube to Female Pipes | Stainless Steel 316Ti Tube to Female Pipes | Stainless Steel 316Ti Tube to Female Pipes | Stainless Steel 316Ti Tube to Female Pipes Applications of our Stainless Steel 316Ti Female Connector Fittings are restricted to a maximum temperature of 1000 Degree F per ASME.
Resistance to sulphuric acid is particularly excellent, but this Stainless Steel 316Ti Ferrule Fittings shows good resistance to phosphoric acid, nitric acid and also in chloride environments.
Our Stainless Steel 316Ti Double Ferrule Fittings is a good option when chloride stress corrosion cracking is an issue and resists pitting and crevice corrosion.To achieve maximum, ductility, this 316Ti Stainless Steel Female Fittings would be heated to 2100 Degree F. However, this heating process in our SS 316Ti Tube Fittings would have a negative effect on the stability of the material.Stainless Steel 316Ti Tube to Female Pipes SpecificationsSpecifications:ASTM A276 ASME SA 479Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Stainless Steel, 300/1000/3000PSI for Brass 316Ti Stainless Steel Tube to Female Pipes Fitting Chemical Composition GradeCMnSiPSCrMoNiN316Timin.–––––16.02.0010.0–max.0.082.00.750.0450.03018.03.0014.0– Stainless Steel 316Ti Tube to Female Pipes Fitting Mechanical Properties GradeTensile Strength (MPa) minYield Strength 0.2% Proof (MPa) minElongation (% in 50mm) minHardnessRockwell B (HR B) maxBrinell (HB) max316Ti5152053575205 Stainless Steel 316Ti Tube to Female Pipes Fitting Physical Properties GradeDensity (kg/m3)Elastic Modulus (GPa)Mean Coefficient of Thermal Expansion (m/m/0C)Thermal Conductivity (W/m.K)Specific Heat 0-1000C (J/kg.K)Electrical Resistivity (n.m)0-1000C0-3150C0-5380Cat 1000Cat 5000C316Ti800019317.217.818.416.221.5500720 Equivalent Grades for 316Ti Stainless Steel Tube to Female Pipes Fitting GradeUNS NoOld BritishEuronormGOSTJapanese JISBSEnNoAFNOR316TiS31635320S31X6CrNiMoTi17-12-21.4571Z6CNDT17‐1208Ch17N13M2TSUS 316Ti SS 316Ti Tube to Female Pipes Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Brass Tube to Union Fittings, which contain Chromium and Nickel, along with appropriate combination of Manganese, Copper & Nitrogen.
These Brass Steel Tube Fittings have Austenitic structure in annealed condition at ambient temperature.
Brass Steel Compression Tube Fittings has multi – facet applications in numerous areas, such as in the Catering and Food Processing industry.
These Brass Steel Compression Fittings has topped as the ‘material – of – choice’ for its good weld ability and corrosion resistance qualities.Brass Steel Union Fittings can be seen used extensively across Utensils, Tableware, Cutlery, kitchen equipment.
The convoluted core in these Brass Steel Union Tube Fittings allows for flexibility, and limits kinking, where it is available with a wide variety of end connections.
Brass Steel Ferrule Fittings is suitable for high – temperature, vacuum, medium – pressure, corrosive or general – purpose environments.
