Sachiya Steel International is a known manufacturer and exporter of Cupro Nickel 90 Angle And Other Cupro Nickel Products, which has good cold – and hot – working properties and is readily weld able. The reasons are mostly attributed to the composition and production of Cupro Nickel 90 / 10 Angle composites, occurrence of erosion – corrosion and corrosion damage in polluted waters. This information provides a review of the corrosion and befouling resistance of Cupro Nickel 90 / 10 Chain based on laboratory test data and documented experience of the alloy in marine environments. Cupro Nickel 90 / 10 C-Channel are used in forming wires that are typically used for low-temperature applications such as heating cables.
The resistance to soil erosion and abrasive fluids of Cupro Nickel 90 / 10 H-Beam is incomparable in the aqueous conditions. Cupro Nickel 90 / 10 I-Beam offers excellent resistance to stress corrosion, erosion, and befouling in seawater and brackish water, excellent fabrication and welding properties, a high resistance to hydrogen embrittlement and the retention of mechanical properties down to cryogenic temperatures.
Cupro Nickel 90 Angle | Cupro Nickel 90 Angle | Cupro Nickel 90 Angle | Cupro Nickel 90 Angle | Cupro Nickel 90 Angle | Cupro Nickel 90 Angle | Cupro Nickel 90 Angle | Cupro Nickel 90 Angle | Cupro Nickel 90 Angle
However, the alloying elements in Cupro Nickel 90 / 10 T-Beam do not become homogenized even by repeated thermal and mechanical treatments. Cu-Ni 90 / 10 Angle ranging in composition are commonly specified in heat exchanger or condenser tubes in a wide variety of marine applications. In addition, Cu-Ni 90 / 10 Chain offers a greater strength for higher pressures.
Cupro Nickel 90/10 Angle, Channel, Beam, Chain Specifications |
||
Specifications | : | ASTM B151 / ASME SB151 |
Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Cu-Ni 90/10 Angle |
: | 5mm to 9mm |
Cu-Ni 90/10 Channel |
: | 40mm*20mm~300mm*300mm |
Cu-Ni 90/10 Beam | : | 3″ thru 12.31″ |
Cu-Ni 90/10 Chain |
: | 1/8 inch – 1/2 inch Diameter |
Thickness |
: | 3.0mm – 120mm |
Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
90/10 Cupro Nickel Angle, Channel, Beam, Chain Chemical Composition
Grade | Cu | Mn | Pb | Ni | Fe | Zn |
Cu-Ni 90/10 | 88.6 min | 1.0 max | 0.05 max | 9-11 max | 1.8 max | 1 max |
Cupro Nickel 90/10 Angle, Channel, Beam, Chain Mechanical Properties
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
0.323 lb/in3 at 68 F | 2260 F | 50000 psi | 20000 psi | 30 % |
Equivalent Grades for 90/10 Cupro Nickel Angle, Channel, Beam, Chain
STANDARD | WERKSTOFF NR. | UNS |
Cupro Nickel 90/10 | 2.0872 | C70600 |
Cupro Nickel 90/10 Angle, Channel, Beam, Chain Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry