Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 347H Pipe Fittings, which are often specified when high strength is needed in moderate – to – large sections. Whether tensile or yield strength is the basis of design, thermally treated Stainless Steel 347H Compression Pipe Fittings generally offer high strength – to – weight ratios. For applications requiring maximum ductility, SS 347H Compression Fittings with low Sulphur levels can be supplied by producers using ladle – refining techniques.
In general, wear resistance can be improved by increasing the hardness of these Stainless Steel 347H Ferrule Pipe Fittings, by specifying an alloy with greater carbon content (without increasing hardness), or by both. The surface of flame – hardened, medium – carbon steel, for example, Stainless Steel 347H Double Ferrule Pipe Fittings is likely to have poorer wear resistance than the carbon – rich case of a carburized steel of equal hardness.
Stainless Steel 347H Pipe Fittings | Stainless Steel 347H Pipe Fittings | Stainless Steel 347H Pipe Fittings | Stainless Steel 347H Pipe Fittings | Stainless Steel 347H Pipe Fittings
Exceptions are nitride parts of these 347H Stainless Steel Compression Pipe Fittings, which have better wear resistance than would be expected from the carbon content alone. For any combination of 347H SS Ferrule Pipe Fittings and heat treatment, three factors tend to decrease toughness: low service temperature, high loading rates, and stress concentrations or residual stress. However, care is necessary for both cold and hot worked materials because these 347H Stainless Steel Double Ferrule Pipe Fittings have high strength.
Stainless Steel 347H Pipe Fittings / Accessories Specifications |
||
| Specifications | : | ASTM A182 ASME SA 182 |
| Tube Size | : | 1/16”OD to 2”OD, 2mm OD to 50mm OD |
| Thread |
: | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Pressure Rating | : | 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass |
SS 347H Pipe Fittings Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Cb | Ni | Fe |
| SS 347H | 0.04 – 0.10 | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 – 20.00 | 8xC – 1.10 | 9.00 – 13.00 | 63.72 min |
Stainless Steel 347H Accessories Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1454 °C (2650 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Equivalent Grades for 347H Stainless Steel Pipe Fittings
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 347H | 1.4961 | S34709 | SUS 347H | – | – | – | X6CrNiNb18-12 |
SS 347H Pipe Fittings / Accessories Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Email: [email protected]
For More Information Visit Our Website: Sachiya Pipe Fittings
