Sachiya Steel International is one of the Leading Manufacturer And Exporter of Incoloy 825 Pipe Fittings, Accessories, which is used in practical immunity to chloride stress corrosion cracking (SCC) and resists polythionic acid SCC. The chief characteristic of these Incoloy 825 Compression Fittings tubing is its corrosion resistance, where water – base coolants are preferred for high speed operations such as grinding, turning, or milling. Incoloy 825 Compression Pipe Fittings is often used in sulfuric acid piping and vessels, marine exhaust systems, hot vessels for food, water and sea water.
Also, Applications for these Incoloy 825 Accessories are similar to those for alloy 20, where high nickel content made it with effective stress corrosion cracking resistance performance. If matching alloy is not available, then Alloy 825 Compression Fittings richer in the essential chemistry (Ni, Co, Cr, and Mo) should be used, where in addition all weld beads should be slightly convex. These Alloy 825 Compression Pipe Fittings can be readily hot or cold worked. Hot working should be in the range 870 Degree C – 1180 Degree C, finishing at 870 Degree C – 980 Degree C.
Incoloy 825 Pipe Fittings | Incoloy 825 Pipe Fittings | Incoloy 825 Pipe Fittings | Incoloy 825 Pipe Fittings | Incoloy 825 Pipe Fittings | Incoloy 825 Pipe Fittings | Incoloy 825 Pipe Fittings
The nickel content of Alloy 825 Accessories makes it resistant to chloride stress – corrosion cracking, and combined with molybdenum and copper, provides substantially improved corrosion resistance in reducing environments when compared to conventional austenitic stainless steels. Service temperatures for these Incoloy 825 Ferrule Pipe Fittings can be from cryogenic to 2000 Degree F.
Incoloy 825 Pipe Fittings / Accessories Specifications |
||
| Specifications | : | ASTM B166 ASME SB 166 |
| Size | : | 1/16″ – 2″ |
| Ends | : | Threaded, Welding, JIC |
| Pressure Rating | : | 1000 Psi, 3000 Psi, 7180 Psi, 10000 Psi |
| Threads | : | NPT , BSPT, BSPP |
Incoloy 825 Pipe Fittings Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
| 825 | 0.05 max | 1.00 max | 0.5 max | 0.03 max | 1.50 – 3.00 | 22.00 min | 38.00 – 46.00 | 19.50 – 23.50 | 0.02 max | 0.06 – 1.20 |
Incoloy 825 Accessories Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 825 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
Equivalent Grades for Alloy 825 Pipe Fittings
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| Incoloy 825 | 2.4858 | N08825 | NCF 825 | NA 16 | ЭП703 | NFE30C20DUM | NiCr21Mo | XH38BT |
Incoloy Pipe Fittings / Accessories Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Email: [email protected]
For More Information Visit Our Website: Sachiya Pipe Fittings
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Incoloy 825 Tube to Male Fittings, which has good weldability for all conventional processes.
Heavy duty machining equipment and tooling in Incoloy 825 Tube Fittings should be used to minimize chatter or work-hardening of the alloy ahead of the cutting.
Incoloy 825 Compression Fittings is the face – centered cubic lattice structure, which is hardened by cold work only.
If exposed for long times to the sensitive temperature range 1200 Degree F – 1400 Degree F, Incoloy 825 Compression Tube Fittings may exhibit severe inter – granular corrosion in certain very aggressive environments.However, exposure to temperatures above 1000 Degree F in Incoloy 825 Ferrule Fittings can result in microstructural changes that significantly lower ductility and impact strength.
In reducing & oxidizing conditions, Incoloy 825 Double Ferrule Fittings resists general corrosion, pitting and crevice corrosion, inter – granular corrosion and stress corrosion cracking.Incoloy 825 Tube to Male Fittings | Incoloy 825 Tube to Male Fittings | Incoloy 825 Tube to Male Fittings | Incoloy 825 Tube to Male Fittings | Incoloy 825 Tube to Male Fittings | Incoloy 825 Tube to Male Fittings | Incoloy 825 Tube to Male Fittings | Incoloy 825 Tube to Male FittingsIncoloy 825 Male Connector Fittings is an austenitic nickel – iron – chromium alloy with additions of molybdenum, copper and titanium, where the corrosion resistance of deposited weld metal from both covered electrode and bare wire is equivalent to that of the parent metal.
The resistance of Alloy 825 Tube Fittings to general and localized corrosion under diverse conditions gives the alloy broad usefulness.
Sachiya Steel International is one of the Manufacturer And Exporter of Incoloy 825 Tube to Male Fittings, which has good weldability for all conventional processes.
Heavy duty machining equipment and tooling in Incoloy 825 Tube Fittings should be used to minimize chatter or work-hardening of the alloy ahead of the cutting.
Incoloy 825 Compression Fittings is the face – centered cubic lattice structure, which is hardened by cold work only.
If exposed for long times to the sensitive temperature range 1200 Degree F – 1400 Degree F, Incoloy 825 Compression Tube Fittings may exhibit severe inter – granular corrosion in certain very aggressive environments.However, exposure to temperatures above 1000 Degree F in Incoloy 825 Ferrule Fittings can result in microstructural changes that significantly lower ductility and impact strength.
In reducing & oxidizing conditions, Incoloy 825 Double Ferrule Fittings resists general corrosion, pitting and crevice corrosion, inter – granular corrosion and stress corrosion cracking.
Incoloy 825 Male Connector Fittings is an austenitic nickel – iron – chromium alloy with additions of molybdenum, copper and titanium, where the corrosion resistance of deposited weld metal from both covered electrode and bare wire is equivalent to that of the parent metal.The resistance of Alloy 825 Tube Fittings to general and localized corrosion under diverse conditions gives the alloy broad usefulness.
Sachiya Steel International is leading manufacturer and exporter of Incoloy 825 Tube to Union Fittings, which are made by using quality material.
Incoloy 825 Tube Fittings (UNS N08825) is used in temperatures up to 1020 Degrees F. Chemical composition of Incoloy 825 Compression Fittings provides great resistance to a lot of corrosive environments, such as pitting, crevice corrosion, inter – granular corrosion, and stress- corrosion cracking.
The levels of molybdenum and copper enable Incoloy 825 Ferrule Fittings to resist reducing agents and acids.Heavy duty machining equipment and tooling should be used in Incoloy 825 Double Ferrule Fittings to minimize chatter or work – hardening of the alloy ahead of the cutting.
Meanwhile, these Incoloy 825 Compression Tube Fittings are also being offered in different sizes and shapes to our customers.
Alloy 825 Tube Fittings does work – harden during machining and has higher strength and “gumminess” not typical of steels.
The hot- working range for Alloy 825 Compression Fittings is 1600 Degree F to 2150 Degree F.Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union Fittings |Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union FittingsAlloy 825 Ferrule Fittings is used for chemical processing, pollution – control equipment, nuclear fuel reprocessing, oil and gas well piping, acid production, pickling equipment and more.
Sachiya Steel International is a Leading Manufacturer And Exporter of Incoloy 800 Pipe Fittings, Accessories, which is often used in Industrial furnaces, Heat – treating equipment, Chemical and petrochemical processing.
The chromium in Incoloy 800 Pipe Fittings imparts both aqueous and heat resistance, whereas iron provides resistance to internal oxidation.
If the application of Incoloy 800H Pipe Fittings involves frequent temperature excursions less than 1290 Degree F (700 Degree C) or parts of are permanently exposed to a temperature below 1290 Degree F (700 Degree C), 800H should be utilized.Incoloy 800HT Pipe Fittings tends to work – harden during machining, and is also used in Furnace components and Electric range heating – element sheathing.
The chromium in Incoloy 800 Compression Pipe Fittings also imparts resistance to oxidation and corrosion, which will remain stable during extended exposure to high temperatures.
The compositional elements of Incoloy 800H Compression Pipe Fittings are the refined elements that have established industrial standards in the high temperature operations by offering suitable creeping and rupturing characteristics.Incoloy 800 Pipe Fittings | Incoloy 800 Pipe Fittings | Incoloy 800 Pipe Fittings | Incoloy 800 Pipe Fittings | Incoloy 800 Pipe Fittings | Incoloy 800 Pipe Fittings | Incoloy 800 Pipe Fittings | Incoloy 800 Pipe FittingsIncoloy 800HT Compression Pipe Fittings is used for the same creep resistant applications.
However the combined effects of mechanical and thermal processing of Alloy 800 Compression Fittings permit higher design stresses to be incorporated than are permitted for the conventional alloy.
Sachiya Steel International offers a wide range of Incoloy 825 Threaded Forged Fittings, which has some excellent features such as cost effectiveness, rugged design, durable finish and more.
Incoloy 825 Forged Threaded Elbow (UNS N08825) is an austenitic nickel – iron – chromium – molybdenum – copper alloy containing high levels of chromium, molybdenum, nickel and copper to provide high levels of corrosion resistance to both moderately oxidizing and moderately reducing environments.
Incoloy 825 Forged Threaded Tee is used in chemical processing, nuclear fuel reprocessing, acid production, propeller shafts and oil and gas well piping.The hot – working range for Incoloy 825 Forged Threaded Cross is 1600 to 2150 Degree F, where most any commercial coolant may be used in the machining operations.
Meanwhile, these Incoloy 825 Forged Threaded Cap are also being offered in different sizes and shapes to our customers.
The molybdenum in Incoloy 825 Forged Threaded Fittings prevents resistance to pitting and crevice corrosion.Incoloy 825 Threaded Forged Fittings | Incoloy 825 Threaded Forged Fittings | Incoloy 825 Threaded Forged Fittings | Incoloy 825 Threaded Forged Fittings | Incoloy 825 Threaded Forged Fittings | Incoloy 825 Threaded Forged Fittings | Incoloy 825 Threaded Forged Fittings | Incoloy 825 Threaded Forged Fittings | Incoloy 825 Threaded Forged FittingsIncoloy 825 Forged Threaded Coupling is also used in chemical process equipment, propeller tubes, tank trucks; and spent nuclear fuel element recovery.
The high nickel content gives Incoloy 825 Forged Threaded Union exceptional resistance to general corrosion, pitting, crevice corrosion, inter – granular corrosion as well as stress corrosion cracking.
