Sachiya Steel International is one of the Leading Manufacturer And Exporter of Inconel 600 Pipe Fittings, which is non – magnetic and has excellent mechanical properties. Our Inconel 600 Compression Fittings is highly resistant to chloride – ion stress – corrosion cracking due to the high nickel content. These Inconel 600 Compression Pipe Fittings is a Nickel – Chromium – Iron alloy with good corrosion resistance, oxidation resistance, and high strength at high temperatures. Controlled chemical composition limits of our Inconel 600 Ferrule Pipe Fittings are applied in the nuclear industry to eliminate the risk of stress corrosion cracking by high purity water containing chloride ions.
For these Inconel 600 Double Ferrule Pipe Fittings, the temperature range in between 1600 Degree F to 2250 Degree F (870 Degree C to 1230 Degree C) is the normal hot working temperature range. Our Alloy 600 Compression Pipe Fittings is a superior choice for vacuum furnace fixtures and heat treat furnace components and fixtures. Since the rate of cooling has no effect on the softening, these Alloy 600 Compression Fittings may be water quenched or air cooled.
Inconel 600 Pipe Fittings | Inconel 600 Pipe Fittings | Inconel 600 Pipe Fittings | Inconel 600 Pipe Fittings | Inconel 600 Pipe Fittings | Inconel 600 Pipe Fittings | Inconel 600 Pipe Fittings
Annealing of our Alloy 600 Ferrule Pipe Fittings without excessive grain growth can be performed at 1850 Degree F for 15 minutes at temperature. These Alloy 600 Double Ferrule Pipe Fittings is resistant to a wide range of corrosive media and often used in equipment for handling abietic acid in the manufacture of paper pulp.
Inconel 600 Pipe Fittings / Accessories Specifications |
||
| Specifications | : | ASTM B166 ASME SB 166 |
| Size | : | 1/16″ – 2″ |
| Ends | : | Threaded, Welding, JIC |
| Pressure Rating | : | 1000 Psi, 3000 Psi, 6000 Psi, 10000 Psi |
| Threads | : | NPT , BSPT, BSPP |
Inconel 600 Pipe Fittings Chemical Composition
| Grade | C | Mn | Si | Fe | S | Cr | Cu | Ni | |
| 600 | min. | – | – | – | 6.0 | – | 14.0 | – | 72.0 |
| max. | 0.15 | 1.0 | 0.5 | 10.0 | 0.015 | 17.0 | 0.5 | – | |
Alloy 600 Accessories Mechanical Properties
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 600 | Psi – 95,000 , MPa -655 | Psi – 45,000 , MPa – 310 | 40 | – | – |
Equivalent Grades for 600 Inconel Pipe Fittings
| Grade | UNS No | Old British | Euronorm | GOST | Japanese JIS | ||
| BS | En | No | AFNOR | ||||
| Inconel 600 | N06600 | NA 13 | NiCr15Fe | 2.4816 | NC15FE11M | МНЖМц 28-2,5-1,5 | NCF 600 |
Alloy 600 Pipe Fittings / Accessories Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Email: sales@sachiyasteel.com
For More Information Visit Our Website: Sachiya Pipe Fittings
Sachiya Steel International is one of the leading Manufacturer And Exporter of Inconel 601 Pipe Fittings, which may be welded by all commercial methods and does not respond to heat treatment.
The properties of these Inconel 601 Compression Pipe Fittings make it a material of broad utility in such fields as thermal processing, pollution control, chemical processing, aerospace, power generation and so on.
Inconel 601 Compression Fittings range in jet engines such as: Combustion – can liners, Diffuser assembles, Containment rings in gas turbines, and Jet – engine igniters.These Inconel 601 Ferrule Pipe Fittings is often used in Thermocouple protection tubes, Verification of nuclear waste, Nuclear waste transport tank lining, Rotary kilns and calciners.
Inconel 601 Double Ferrule Pipe Fittings has outstanding resistance to high temperature oxidation, where Annealed Heat Treatment can be conducted up to 2100 Degree F (1150 Degree C).
In the power – generation field, these Alloy 601 Compression Fittings is used for super – heater tube supports, ash – handling systems, and grid barriers.Inconel 601 Pipe Fittings | Inconel 601 Pipe Fittings | Inconel 601 Pipe Fittings | Inconel 601 Pipe Fittings | Inconel 601 Pipe Fittings | Inconel 601 Pipe Fittings | Inconel 601 Pipe FittingsAlloy 601 Compression Pipe Fittings is more difficult to machine than stainless steel 304, which is also used for igniters and diffuser assembles in gas turbines for aerospace applications.
The oxidation of these Alloy 601 Ferrule Pipe Fittings was performed in air, in the temperature range 1000 Degree C – 1150 Degree C, during 90 h, where the kinetic results show that the parabolic behavior is always followed in this temperature rangeInconel 601 Pipe Fittings / Accessories SpecificationsSpecifications:ASTM B166 ASME SB 166Size:1/16″ – 2″Ends:Threaded, Welding, JICPressure Rating:1000 Psi, 3000 Psi, 6010 Psi, 10000 PsiThreads:NPT , BSPT, BSPPInconel 601 Pipe Fittings Chemical CompositionGradeCMnSiSCuFeNiCrInconel 6010.10 max1.00 max0.50 max0.015max1.00 maxBalance58.0 – 63.021.0 – 25.0Alloy 601 Accessories Mechanical PropertiesElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)ElongationInconel 6018.1 g/cm31411 °C (2571 °F)Psi – 80,000 , MPa – 550Psi – 30,000 , MPa – 20530 %Equivalent Grades for 601 Inconel Pipe FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENInconel 6012.4851N06601NCF 601NA 49XH60BTNC23FeANiCr23FeAlloy 601 Pipe Fittings / Accessories Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is one of the leading manufacturer and exporter of Inconel 600 Tube to Union Fittings in various sizes and dimensions, which are perhaps most resistant of all commonly used engineering alloys.
Inconel 600 Tube Fittings (UNS N06600) presents the desirable combination of high strength and good weldability under a wide range of temperatures.
Inconel 600 Compression Fittings has Good Corrosion Resistance at High Temperatures and shows high levels of resistance to stress – corrosion cracking.
The high nickel content of Inconel 600 Double Ferrule Fittings provides exceptional resistance to chloride stress corrosion cracking.Inconel 600 Ferrule Fittings has useful resistance to dry Cl2 and HCl gases at moderately elevated temperatures.
Inconel 600 Compression Tube Fittings has excellent corrosion by high – purity water, along with caustic corrosion.
Alloy 600 Tube Fittings does work – harden during machining and has higher strength and “gumminess” not typical of steels.
Sachiya Steel International is one of the leading manufacturer and exporter of Inconel 600 Tube to Male Fittings in various sizes and dimensions, which has Carburization resistance and Oxidation resistance to 2000 Degree F. Heavy duty machining equipment and tooling in Inconel 600 Tube Fittings should be used to minimize chatter or work – hardening of the alloy ahead of the cutting.
Besides heat – treating industries, Inconel 600 Compression Fittings is as well used in furnace component, aerospace, pulp and paper, chemical industries and nuclear engineering.
Inconel 600 Compression Tube Fittings is a superior choice for: heat exchanger tubing and nuclear reactor vessels.Typical corrosion applications of Inconel 600 Male Connector Fittings include titanium dioxide production (chloride route), vinyl chloride monomer (VCM), magnesium chloride, and perchloroethylene syntheses.
Softening by annealing begins at about 1600 Degree F (871 Degree C), these Inconel 600 Ferrule Fittings is reasonably complete after 10 to 15 minutes of heating at 1800 Degree F (982 Degree C).Inconel 600 Double Ferrule Fittings is slightly more machinable compared to 304 stainless steel and should be performed by means of tools large enough to handle the loads.
Applications of Alloy 600 Tube Fittings include heaters, bubble towers, stills and condensers for processing of fatty acids.
Alloy 600 Male Connector Fittings is combination of Nickel Chromium and Iron provides a standard material for the chemical industry and the automotive engine, aero – engine and airframe sectors.Inconel 600 Tube to Male Fittings SpecificationsSpecifications:ASTM B366 ASME SB366Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Inconel, 300/1000/3000PSI for BrassInconel Alloy 600 Tube To Male Fittings Chemical CompositionGradeCMnSiSCuFeNiCrInconel 6000.15 max1.00 max0.50 max0.015max0.50 max6.00 – 10.0072.00 min14.00 – 17.00Inconel 600 Tube To Male Fittings Mechanical PropertiesElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)ElongationInconel 6008.47 g/cm31413 °C (2580 °F)Psi – 95,000 , MPa – 655Psi – 45,000 , MPa – 31040 %Equivalent Grades for 600 Inconel Ferrule Fitting Tube To Male FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENInconel 6002.4816N06600NCF 600NA 13МНЖМц 28-2,5-1,5NC15FE11MNiCr15Fe Alloy 600 Tube To Male Fittings Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is one of the leading manufacturer and exporter of Inconel Alloy 600 Tube to Male Fittings in various sizes and dimensions, which has Carburization resistance and Oxidation resistance to 2000 Degree F. Heavy duty machining equipment and tooling in Inconel 600 Tube Fittings should be used to minimize chatter or work – hardening of the alloy ahead of the cutting.
Besides heat – treating industries, Inconel 600 Compression Fittings is as well used in furnace component, aerospace, pulp and paper, chemical industries and nuclear engineering.
Inconel 600 Compression Tube Fittings is a superior choice for: heat exchanger tubing and nuclear reactor vessels.Typical corrosion applications of Inconel 600 Male Connector Fittings include titanium dioxide production (chloride route), vinyl chloride monomer (VCM), magnesium chloride, and perchloroethylene syntheses.
Softening by annealing begins at about 1600 Degree F (871 Degree C), these Inconel 600 Ferrule Fittings is reasonably complete after 10 to 15 minutes of heating at 1800 Degree F (982 Degree C).Inconel Alloy 600 Tube to Male Fittings | Inconel Alloy 600 Tube to Male Fittings | Inconel Alloy 600 Tube to Male Fittings | Inconel Alloy 600 Tube to Male Fittings | Inconel Alloy 600 Tube to Male Fittings | Inconel Alloy 600 Tube to Male Fittings | Inconel Alloy 600 Tube to Male Fittings | Inconel Alloy 600 Tube to Male FittingsInconel 600 Double Ferrule Fittings is slightly more machinable compared to 304 stainless steel and should be performed by means of tools large enough to handle the loads.
Applications of Alloy 600 Tube Fittings include heaters, bubble towers, stills and condensers for processing of fatty acids.
Alloy 600 Male Connector Fittings is combination of Nickel Chromium and Iron provides a standard material for the chemical industry and the automotive engine, aero – engine and airframe sectors.Inconel 600 Tube to Male Fittings SpecificationsSpecifications:ASTM B366 ASME SB366Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Inconel, 300/1000/3000PSI for BrassInconel Alloy 600 Tube To Male Fittings Chemical CompositionGradeCMnSiSCuFeNiCrInconel 6000.15 max1.00 max0.50 max0.015max0.50 max6.00 – 10.0072.00 min14.00 – 17.00Inconel 600 Tube To Male Fittings Mechanical PropertiesElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)ElongationInconel 6008.47 g/cm31413 °C (2580 °F)Psi – 95,000 , MPa – 655Psi – 45,000 , MPa – 31040 %Equivalent Grades for 600 Inconel Ferrule Fitting Tube To Male FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENInconel 6002.4816N06600NCF 600NA 13МНЖМц 28-2,5-1,5NC15FE11MNiCr15Fe Alloy 600 Tube To Male Fittings Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
