Ninthore Overseas is one of the Leading Manufacturer And Exporter Of high quality Stainless Steel 310 Flanges , where the heat treatment is given on the continuously rolling hearth furnace and the furnace is fitted with temperature recorders and controllers. After the heat treatment process, Stainless Steel 310 Slip On Flanges and pipes are straightened and subjected to pickling for removing scales from the surface. In some cases, the required size of Stainless Steel 310S Threaded Flanges may not be obtained from the mill directly, so then the cold operation process can be used to obtain the desired size.
In cold drawing process, Stainless Steel 310S Weld Neck Flanges are coated with oxalic and soap solution. This solution in Stainless Steel 310S Blind Flanges acts as a lubricant to reduce friction while cold drawing operation. In the cold drawing process, Stainless Steel UNS S31000 / S31008 Socket Weld Flanges is drawn over the bench using die plugs. The drawn – out Stainless Steel 310S Lap Joint Flanges is then subjected to cleaning, heat treatment, pickling and straightening.
Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges
Stainless Steel 310 Ring Joint Type Flanges is marked with grade of material, size, heat number and the stamp of third party inspection before passing on to stainless steel pipe exporters. Stainless Steel 310S Spectacle Blind Flanges thus produced will undergo certain testing and quality checks. This process for Stainless Steel 310 Spacer Flanges is followed by proper packing and dispatch.
|
Stainless Steel 310 / 310S Pipe Flanges Specifications
|
||
| Specifications | : | ASTM A182 / ASME SA182 |
| Size | : | 1/2″ (15 NB) to 48″ (1200NB) |
| Standards |
: | ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. |
| Class / Pressure | : | 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. |
| Standard | : | ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc. |
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 310 | 0.015 max | 2 max | 0.015 max | 0.020 max | 0.015 max | 24.00 – 26.00 | 0.10 max | 19.00 – 21.00 | 54.7 min |
| SS 310S | 0.08 max | 2 max | 1.00 max | 0.045 max | 0.030 max | 24.00 – 26.00 | 0.75 max | 19.00 – 21.00 | 53.095 min |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.9 g/cm3 | 1402 °C (2555 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 40 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 310 | 1.4841 | S31000 | SUS 310 | 310S24 | 20Ch25N20S2 | – | X15CrNi25-20 |
| SS 310S | 1.4845 | S31008 | SUS 310S | 310S16 | 20Ch23N18 | – | X8CrNi25-21 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Ninthore Overseas is the fastest growing name in the metal industry. We provide a wide range of Steel products ranging from Sheets, Plates, Flanges and Fittings which are of high quality.
Email: sales@ninthoreoverseas.com
For More Information Visit Our Website: Ninthore Overseas
Sachiya Steel International is one of the Leading Manufacturer And Exporter Of high quality Stainless Steel 310 Flanges, where the heat treatment is given on the continuously rolling hearth furnace and the furnace is fitted with temperature recorders and controllers.
After the heat treatment process, Stainless Steel 310 Slip On Flanges and pipes are straightened and subjected to pickling for removing scales from the surface.
In some cases, the required size of Stainless Steel 310S Threaded Flanges may not be obtained from the mill directly, so then the cold operation process can be used to obtain the desired size.In cold drawing process, Stainless Steel 310S Weld Neck Flanges are coated with oxalic and soap solution.
This solution in Stainless Steel 310S Blind Flanges acts as a lubricant to reduce friction while cold drawing operation.
In the cold drawing process, Stainless Steel UNS S31000 / S31008 Socket Weld Flanges is drawn over the bench using die plugs.
The drawn – out Stainless Steel 310S Lap Joint Flanges is then subjected to cleaning, heat treatment, pickling and straightening.Stainless Steel 310 Flanges| Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges Stainless Steel 310 Ring Joint Type Flanges is marked with grade of material, size, heat number and the stamp of third party inspection before passing on to stainless steel pipe exporters.
