Community

Know UAE Approach to Fire Incidents.

Nisha Bisht

There have been numerous fires involving buildings with combustible cladding. In most cases, the extent of damage to the building has been significant, and unfortunately in a few instances, there has been the loss of life.

Due to these increasing fire incident UAE Fire and Life Safety Code of Practice. It did not contain any specific requirements on façades, however, where the code was silent on any fire safety aspect reference was normally made to relevant NFPA codes and standards. It requires the façade design to be reviewed by a competent, qualified, and approved fire consultant before any installation of the façade at the site.

Qualification and licensing is first thing to do as per UAE Fire and Life Safety Code of Practice. The technical qualification and registration are essential to verify the competency and to ensure the individual or organization is competent, qualified, licensed, and can be accountable for the design and installation of the façade assembly.

Next is Façade Design Review. A façade fire assessment report is required to be submitted by the House of Expertise to Civil Defense ideally prior to any installation of the façade onsite. This report outlines the façade assembly proposed for the development and incorporates the system schematics.

There are more such steps read the article.

Nisha Bisht

From the Author

Key Aspects of Façade Material Selection

Nisha Bisht

Intelligent Glass Façades for Sustainable Buildings

Nisha Bisht

Codes and Safety Measures for Fire Safe Glazed Facade

Nisha Bisht

But the glazed buildings are in much higher risk of fire hazard than brick and mortar façade buildings. Let's discuss fire risks associated with glass façades, their application concerning codes, and commercially available options to minimize the fire risks. Some of them are:•Poke through effect: Spread of fire from external fire to internal areas of a building. The NBC code has listed out several norms for the fire safety of façades in high-rise buildings. For more information on fire safety codes and measures to reduce spread of fire in glazed building read the article.

HOW CO2 FIRE EXTINGUISHERS WORK:

Wajahat Hussain

CO2 fire extinguisher discharges CO2 gas, also known as carbon dioxide.

This is stored in the extinguisher as a liquid, and the gas is created under pressure when the handle of the extinguisher is squeezed.This causes the CO2 gas to emerge at great speed, which is why CO2 fire extinguishers are not recommended for chip pan fires – they could literally blast the flames into surrounding areas.Unlike water and foam extinguishers, CO2 fire extinguishers do not work by cooling the fire and so are ineffective on fires involving flammable solids.Instead, CO2 extinguisher work by replacing the oxygen surrounding the flames with carbon dioxide, meaning the fire can no longer burn.

Precaution: Fire extinguisher refilling and maintenance is necessary once in a year.

Fire Risk Management for Organizations

Shahzad shafique

During the event of a fire, most people die due to smoke inhalation and panic situations. To resolve the issue of trapped smoke, various materials and systems are available. Proper guidelines should be disseminated and regular training and drill must be conducted from time to time. To resolve the issue of trapped smoke, various materials and systems are available. Proper guidelines should be disseminated and regular training and drill must be conducted from time to time. The awareness can be spread by the government, fire safety departments, fire safety material manufacturing companies, etc. To control the active fire, one should through with the guidelines of fire safety post-construction in an occupied building.