You can easily remove the wallpaper from the walls as the professionals and dyers used to do. Usually, the Animal Print Wallpaper removal task is typically messy and time-consuming. However, recovering the previous wallpaper, which is a spoiled, cracked, or diverse type that will not be going to work and using the paint on this old wallpaper is never advised. In this case, you have only the option to remove the old wallpaper. Make sure that it should be done right the first time so that you would have flawlessly prepared walls that are free from trouble to finish.
Getting Started:
To keep yourself safe, you have to shut off all the circuit breakers in your room and remove all the covers of the outlet; you can also use tape to cover all the outlets by using tape. By following these simple and easy steps, you can keep yourself safe, even if you have to use a large amount of water to remove the wallpaper. Moreover, you should have to cover the furnishings and floor with the plunge cloth when you do so.
Steps To Remove The Wallpaper From Walls: -
1. Preparing Hot Water Solution:
You can start the wallpaper removal process by spraying the wall with a liquid hot water solution with a fabric softener or hot water with vinegar. You can either add the ¼ household vinegar with 2/3 hot water or ¼ volume of fabric softener to ¾ hot water.
2. Cover The Switchboards And Floor:
As you are going to use this solution to be sprayed or dabbed on the walls, there is a great risk of getting damaged with the solution. Once you prepare the removal solution, cover the floor with a plastic sheet by taping it to the wall bottom. Next, you have to cover all the electric switchboards with plastic sheets to save your switches and wiring from damage. After this, turn off the room’s power supply to prevent any accident electric shocks.
3. Applying Solution On The Wall:
The next step is to apply the solution on the surface of the wallpaper to loosen it up. You can use the sponge or sprayer to apply the solution to the small area, and you have to wait for 3-4 minutes to get it absorbed on the surface. In addition, thicker wallpaper needs a stronger solution.
4. Scoring The Wallpaper:
Once applying the solution, use a scoring tool and rotate in overlapping circles over the wet area to loosen the adhesive. Don’t apply too much pressure on the wall surface.
5. Cover Your Eyes And Start Peeling Out Wallpaper:
Once the solution gets absorbed, put goggles on your eyes and peel off the wallpaper from the edge with the putty knife. Start tearing out the large sheet of wallpaper as possible. After removing the wallpapers from the wall, remove the plastic sheet and tape from the electric switchboards. You can use the screwdriver to remove the board cover.
Final Words:
There are simple ways how to remove the Animal Print Wallpaper from the walls of your home.
