Sundream’s False Floor - Encyclopaedia

A false floor, also known as an access floor or a raised floor, is usually built above a flat solid floor to create a void between them. The void is intended to serve as a conduit for transporting construction materials and services such as power to all portions of the building, water supply and drainage, and heating, ventilation, and air conditioning. The false floor system is made up of a series of pedestals that are installed on concrete floors and secured with adhesives and mechanical fasteners. These pedestals can be moved around. As a result, the floor system can be as low as 3 inches above the concrete and as high as 48 inches above the concrete.

False floor system components

The Sundream Group, a known name among the leading False floor manufacturers and Suppliers in India, deliver false floors comprising 6 components. Let’s discuss each of them in detail:

a.   Floor panel

The access floor's flat surface is formed by the floor panel. It is normally about 24" by 24" in dimension and is made of steel. The panel is filled with concrete components, making it sturdy and flexible in case the building services put in the panel need to be improved. Aluminium can also be utilised as a form of reinforcement. These floor panels are typically available in a variety of styles and materials, allowing you to select the best material for your needs while staying within your budget.

b.   Floor pedestal

The false floor is supported structurally by the pedestal portion of the artificial floor. Stands, legs, jacks, and stanchions are some of the terms used to describe them. The pedestal joins the floor base and the head, allowing for the installation of any building elements beneath the floor. Depending on the floor system installed in the building, different floor pedestals may be used. The pedestals are adjustable and provide a vertical support system for the elevated floor.

c: Floor stringer

Stringers are also important parts of the false floor construction since they help to connect the pedestals and build a framework for a sturdy floor panel. They're also known as connecting rods or grids, and they help provide lateral stability, especially in false floor constructions with large voids. Depending on the elevated floor design, the stringers might be formed of aluminium channels or square tubing. They can be screwed together at both ends to keep them firmly attached to the pedestals. The stringer essentially acts as an additional support for the raised flooring.

Why Are The False Floors Needed?

There are a variety of reasons why you might want to put in false floors in your building. We'll go over some of the most common uses for false floors in various structures. Offices, data centres, and households benefit the most from false floor systems.

Offices

Office occupants can enjoy clean air and comfortable room temperatures thanks to access floors. Such floors are well-known for their efficient dispersal of cold air. This saves businesses a lot of money on electricity, as well as the cost of buying and maintaining air conditioners and fans. Underground wiring may be run through the flooring, and you can install a limitless amount of equipment.

Data centres

Data centres, for example, have a high need for raised floor systems, however the requirements vary depending on the data centre. If data centre servers become hot, the floors must have perforated tiles that allow cold air to pass through, keeping the area cooler. Maintenance tiles can be set in cold air channels where hot air passes to make data centres warmer. Most data centres require access floors because they must install a large amount of cabling, which is difficult to perform on standard concrete floors. Additionally, this reduces installation costs and time. The floors make cabling much easier, resulting in clean data centre floors and well-lit rooms.

At home

 False floor systems can be used in living rooms at home because there is also equipment and the inhabitants require comfort. Because you may have a home office where you like to work or study, the demand for access floors in your house may be similar to that of your office. You could also need to upgrade your home's electronic equipment. More cabling is essential in this instance and is best done underground than on the walls.

The Flooring Process

If you want to do a good job installing false floors, make sure you have the necessary tools and equipment. When it comes to selecting the most appropriate tools for false floor installations, there are numerous options to consider. As a result, you may require the assistance of a professional to assist you in selecting the best building tools. The correct tools, on the other hand, may be determined by a variety of criteria such as the type of flooring, the cooling system, the wiring that needs to be installed in the floor panel, and the weight capacity of the tools used in the flooring process. Quality tools and equipment are required to support the entire flooring system.

Depending on the area and property type where the panels are being laid, the flooring process may differ. As a result, it's critical to gain a thorough understanding of how to properly install false floors in various areas of the property. A fully skilled manufacturer and a supplier can assist you in efficiently working out everything and also provide appropriate solutions if a problem arises during the installation procedure.

To summarize

You must invest with the Sundream Group’s false flooring system, as they are the leading False floor manufacturers and Suppliers in India. One advantage of choosing The Sundream group would be, you will be able to avail the top benefits of a False Floor System, which are: Easy access and a better appearance. Flexible to adjustments and easy to fix. Because of these characteristics, The Sundream Group claim that their false floors have the potential to change the building business, and that adopting them will save a lot of money.