AI Products 

Specification and Application of Butterfly Valve

D Chel Valves
Specification and Application of Butterfly Valve


D Chel Valves are the leading Butterfly Valves Manufacturers in India. Butterfly valves are used to control the flow of water in a pipeline. They may also be used to control other liquids such as gas and steam. Butterfly valves have a spring loaded valve head that opens and closes when it is rotated. The force applied by this spring is sufficient to keep the valve closed for long periods of time but not strong enough to open the valve quickly.

Only quality-tested Butterfly Valves are supplied and offered by D Chel Valves. Before offering butterfly valves to our customers, D Chel Valves puts them through a number of toughness and hardness tests. Our butterfly valves and their varieties are produced in India in accordance with international ASTM/ASME, ANSI, API, and DIN Standards. We are the prominent butterfly valve manufacturers in India.

In this article, we will discuss about specification and application of butterfly valve:

Classification of Butterfly Valves

Butterfly valve manufacturers and classified by their construction, position and direction of rotation.

Butterfly valves can be classified into four main categories: outlet butterfly valve (OBV), inlet butterfly valve (IBV), two-way check ball, and one-way check ball. The classification depends on how the valve is constructed, where it's located and what direction it rotates in.

Butterfly valves are usually used as bypassing devices for air systems where a large volume needs to flow from one side to another without being blocked by other components such as filters or gauges. This is especially common in industrial applications like factories or power plants where excess pressure can damage sensitive equipment if allowed to build up over time due to temperature fluctuations during operation cycles throughout day/night cycles without failover backup measures installed during planning stages so that no surprises happen unexpectedly later down road when something goes wrong unexpectedly causing problems which could have been avoided had proper planning been done beforehand so.

According to the construction, it can be divided into centre-line butterfly valve and eccentric butterfly valve

Centre-line butterfly valves have a centerline, which is the axis of rotation. It can be used in the middle of a pipe, but it is also suitable for pipes with short ends and/or long ends. Eccentric butterfly valves are used at both ends of a pipe. The eccentric spring allows you to adjust its position along the length of your pipe so that it can be installed anywhere along any section: either near or far from where you need it most.

Advantages of Butterfly Valves

Butterfly valves are used in many industries and have a wide range of applications. They can be applied to a variety of processes, including:

  • Piping of liquids and gases
  • Process control (e.g., valves used in pipelines)
  • Control systems

Application of Butterfly Valves

Butterfly valve manufacturers are widely used in oil, gas, water and other industries. They are also used in process control of various industrial processes such as manufacturing chemicals. The butterfly valve is an essential component of many different types of machines and equipment that require efficient operation or control over the flow of fluids through a pipe system.

Butterfly valves are available with different sizes depending on the application requirements such as pressure rating range or flow rate requirement etc. This type of valve will be suitable for most applications but there may be some exceptions depending on your specific needs when choosing this kind of product

Butterfly Valves have many classification and applications.

Butterfly valve is a kind of valve, which is used to control the flow of fluid. It can be divided into two types: fixed butterfly valve and moveable butterfly valve. Butterfly valves are widely used in water supply, water treatment, chemical industry, power plant and other fields.

Butterfly valve manufacturers has a butterfly shape and its function can be divided into three parts:

  • The first part is called "throat", it connects with the main body of the device;
  • The second part is called "wing", this section generates a large amount of back pressure when closed;
  • The third part is called "seat", here you can put your hands for operation purposes

is widely used in water supply, water treatment, chemical industry, power plant, shipbuilding, petroleum and other fields


Butterfly valve is the most common type of pressure control device in use today. It is used in a wide variety of applications, such as boiler systems, air conditioning and refrigeration, chemical plants and many others.

D Chel Valve is India’s leading butterfly valve manufacturers and ball valve manufacturers. To know more about valves visit our website dchel valve for more details and specifications.

D Chel Valves
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more