logo
logo
AI Products 

Ball float Steam Trap Manufacturer in India

avatar
Svalve01
Ball float Steam Trap Manufacturer in India

Specialityvalve is a prime Ball Float Steam Trap Manufacturer in India. The ball float steam trap function by sensing the difference in density between steam and condensate. If the trap is on the right condensate reaching then the trap will cause the ball float to rise, lifting the valve off its seat and releasing condensate. The valve is always flooded, and neither steam nor air will pass through it so early traps of this kind were released using a manually operated cock at the top of the body. Modern traps use a thermostatic air vent which is on the right that permits the initial air to pass the trap is also handling condensate.


Ball float steam traps used for secondary heating like coils, vessels, and heat exchangers cause a lot of condensate post-heat transfer. This condensate has real heat parts with cost tagged to it. It is used as feed water for the boiler and decreases the cost of heating, and treatment chemicals. The function of the ball float trap is the rising condensate level which raises the float that opens the valve and discharges the condensate and reverses when the level of condensate drops the valve to near the trap.


Advantages of Ball Float Steam Trap:


  1. Is resistant to water hammer
  2. It has a large capacity size
  3. It is an automatic air vent is fitted so the trap can discharge freely


Disadvantages of Ball Float Steam Trap:


  1. Water hammer can damage
  2. Pressure limit of 125psig
  3. Cooling leg required in some applications


Parts of Ball Float Steam Trap:


  1. Condensate discharge valve
  2. Drain plug
  3. Thermostatic air vent
  4. Float


Applications of Ball Float Steam Trap:


  1. Batteries and unit heaters
  2. Drying cylinders
  3. Heating tanks

 

Available materials: Cast iron, WCB, WCC, WC6, LCC, LCB, Titanium, SS304, SS316, CF8, CF8M , F55, F51, F53, Monel, Ductile Iron.


Available Size: ½” to 48”


Class: 150 to 2500


Nominal Pressure: PN10 to PN450


Medium: LNG, Cryogenic application, Water, Air, Steam, Oil


Ends: Flanged, Threaded, Buttweld, Socket weld


Operations: Lever Operated, Electric Actuated and Pneumatic Actuated, Gear Operated

 

Specialityvalve is the foremost Ball Float Steam Trap Manufacturer in India which is well known for its commitment to quality. All the products are tested by our highly professional team before delivery to clients.

 

https://www.specialityvalve.com/product-category/ball-float-steam-trap/



Pressure Safety Valve Manufacturer in India:


Specialityvalve is one of the largest Pressure Safety Valve Manufacturer in India. A pressure safety valve is used to let go of gases or liquids. The motive of a safety valve is to be the last line of defense in protecting equipment, the environment, and most important personnel. It can be used as a final measure to stop accidents rather than consistently maintaining pressure. These valves are slowly regulated and must meet ASME code requirements.


The pressure safety valve must be able to control at any time in any condition. The operation cannot depend on a power source so it is operable in the case of a power outage. The elements that need to consider when selecting a pressure safety valve are set to pressure, temperature, back pressure, connection size, and required capacity.


A safety Valve is a pressure relief valve that releases a substance from a boiler, pressure vessel, or another system. Their main role is safety and used for boiler overpressure protection, and process operation to prevent product damage due to excess pressure.


Types of pressure safety valves:


  1. Spring-loaded pressure safety valves
  2. Pilot-operated pressure safety valves
  3. Full lift pressure safety valve
  4. Low lift pressure safety valve

 

Benefits of pressure safety valve:


  1. Life protection.
  2. It creates opens and releases extra pressure from machinery.
  3. Prevent fluid release

 

Materials: Cast iron, Ductile Iron, WCB, SS304, SS316, CF8, CF8M, WC6, WCC, LCB, LCC.


Class: 150 to 2500.


Nominal Pressure: PN10 to PN450.


Ends- Butt weld, socket weld, Flanged, Threaded


Size: ½” to 40”.


Specialityvalve is one of the best Pressure Safety Valve Manufacturer in India and has one of the most popular products which are available in a variety of sizes and can also be customized to meet the needs of our customers. All the products are tested according to requirements and standards.


https://www.specialityvalve.com/product-category/pressure-safety-valve/




collect
0
avatar
Svalve01
guide
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more