What are Stainless Steel 904L Pipes?
Stainless steel 904L pipes are made from an alloy with chromium, nickel, molybdenum, copper, and titanium. This combination of elements makes it extremely strong and highly corrosion-resistant. It is also highly resistant to acids and alkalis. The pipes themselves come in various sizes depending on their application.
Applications of Stainless Steel 904L Pipes
Stainless steel 904L pipes have a variety of industrial applications because of their strength and corrosion resistance. They can be used for the construction of wastewater lines in the oil industry as well as for chemical process piping in pharmaceutical plants. Additionally, they can be used for heat exchangers in high-temperature environments or even for condenser tubes in nuclear power plants.
Uses and Advantages of Stainless Steel 904L Pipes
The primary benefit of using stainless steel 904L pipes is that they have exceptional corrosion resistance due to their composition. This makes them ideal for use in demanding environments such as oil refineries or nuclear power plants where other materials may not be able to handle the pressure or temperature extremes encountered there. Additionally, the chromium content gives them excellent weldability which makes them easy to install and modify if needed later down the line. Finally, these pipes offer superior strength compared to other types of stainless steels which allows them to handle higher pressures without requiring thicker walls or larger diameters than other materials would require under similar circumstances.
Characteristics of Stainless Steel 904L Pipes
One key characteristic that sets stainless steel 904L apart from other types is its extremely low carbon content—it has just 0.03% versus 0.12% found in other grades like 304 or 316 stainless sheets of steel—which makes it far more resistant to stress cracking than these other grades when exposed to chloride solutions such as salt water or seawater over long periods of time. Additionally, this grade has higher levels of molybdenum than any other type which provides excellent resistance against pitting corrosion caused by chlorides present in those same solutions mentioned above which can cause localized areas of attack on the surface over time if left unchecked. Finally, its high nickel content gives it outstanding formability so that it can be easily bent into complex shapes with relative ease compared with some other grades out there on the market today.
Sachiya Steel International is one of the prominent Manufacture and Exporter for Stainless Steel 904L Tube to Female Pipes, which as well resists general corrosion by many aqueous media.
Because of its lower carbon – content, our Stainless Steel 904L Tube Fittings minimizes carbide precipitation, and improves weldability.
The protective oxide film of these Stainless Steel 904L Compression Fittings which is formed is adherent in both static and cyclic conditions of heating and cooling, and resistance to carburization is enhanced when a thin film of oxide is being formed on the alloy through pre – oxidation prior to service.Chromium carbides precipitate in our Stainless Steel 904L Female Connector Fittings at temperatures between 1000 Degree F and 2000 Degree F (540 Degree C and 1095 Degree C).
These Stainless Steel 904L Ferrule Tube Fittings has good rupture and creep strength and excellent resistance to oxidation, carburization and sulfidation at temperatures up to 816 Degree C.Stainless Steel 904L Tube to Female Pipes | Stainless Steel 904L Tube to Female Pipes | Stainless Steel 904L Tube to Female Pipes | Stainless Steel 904L Tube to Female Pipes | Stainless Steel 904L Tube to Female Pipes | Stainless Steel 904L Tube to Female Pipes | Stainless Steel 904L Tube to Female Pipes Consequently, our Stainless Steel 904L Double Ferrule Tube Fittings are similar to other austenitic alloys in that they can be rendered susceptible to inter – granular corrosion (sensitized) in certain aggressive environments by exposure to temperatures of 1000 Degree F to 1400 Degree F (540 Degree C – 760 Degree C).
Resistance to hydrogen of these 904L Stainless Steel Female Connector Fittings is excellent and standard materials used in the production of hydrogen in steam / hydrocarbon reforming processes.
Stainless Steel 904L Tube to Female Pipes SpecificationsSpecifications:ASTM A276 ASME SA 479Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Stainless Steel, 300/1000/3000PSI for Brass 904L Stainless Steel Tube to Female Pipes Fitting Chemical Composition GradeCMnSiPSCrMoNiN904Lmin.–––––19.04.0023.000.10max.0.202.001.000.0450.03523.05.0028.000.25 Stainless Steel 904L Tube to Female Pipes Fitting Mechanical Properties GradeTensile Strength (MPa) minYield Strength 0.2% Proof (MPa) minElongation (% in 50mm) minHardnessRockwell B (HR B) maxBrinell (HB) max904L4902203570-90 typical– Stainless Steel 904L Tube to Female Pipes Fitting Physical Properties GradeDensity (kg/m3)Elastic Modulus (GPa)Mean Coefficient of Thermal Expansion (m/m/0C)Thermal Conductivity (W/m.K)Specific Heat 0-1000C (J/kg.K)Electrical Resistivity (n.m)0-1000C0-3150C0-5380Cat 1000Cat 5000C904L800020015.0––13.0–500850 Equivalent Grades for 904L Stainless Steel Tube to Female Pipes Fitting GradeUNS NoOld BritishEuronormSwedish SSJapanese JISBSEnNoName904LN08904904S13X1NiCrMoCu25-20-51.4539––SUS 890L SS 904L Tube to Female Pipes Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry
