Sign in

Clean and Safe: The Value of Line marking in Traffic Control

Molly Crowe
Clean and Safe: The Value of Line marking in Traffic Control

Applying colour, spraying, painting, or drawing lines on a surface to denote areas of interest or traffic directions is known as line marking. Temporary, non-mechanical, and mechanical methods of line marking are all possible. In addition to serving as a visual and auditory cue for drivers and pedestrians alike, it is important for indicating turns, no passing zones, and other safety-related information.

In what ways might line marking be helpful?

Line marking is widely used worldwide to convey non-verbal messages, instructions, and other information. Most frequently, lines are painted on the ground to indicate places that are off-limits to specific activity or to notify drivers and pedestrians of potential dangers. In some situations, auditory tactile line markings warn and notify drivers who have veered off the road, increasing the likelihood of a safe return to the roadway. The country employs a system of audible, tactile line markers to keep drivers alert on Australia's busiest highways.

Permanent road marking may be necessary for a project, whether parking lot lines or a whole highway. Marking tape is a modern and acceptable substitute for paint or thermoplastic for creating permanent lines. Line marking using marking tape is quick and easy since no priming or other prep work is required. Plastic permanent line tapes have another advantage for drivers: they are more visible in inclement weather and at night thanks to reflective technology.

What sort of paint is used for the lines?

The paint used for line marking is often an acrylic or water-based paint that dries quickly and is designed to endure for a long time. As these lines will likely be located in locations with heavy foot or vehicle traffic, using high-quality line marking paint is essential to avoid the costly cost of repainting the lines more frequently.

Cleaner, crisper lines may be produced with the help of a professional marking machine and high-quality marking paint, with the latter also helping to lessen the likelihood of an uneven paint distribution.

Tips for getting your property ready for fresh line marking

The surface must be spotlessly clean to get the best results while marking lines. The surface may be scraped, pressure washed, grit blasted, or ground down with concrete to make it ready for new line marking. The optimum adherence to the new paint may be achieved by stripping away the old paint, oils, floor coatings, and other stains on and beneath the surface.

The recommendation is to thoroughly clean the area at least 24 hours before a professional line marking crew arrives. In most cases, this is enough time for the area to be thoroughly cleaned, dried, and marked with new lines or floor markings.

Five Reasons to Mark Off Areas

  1. Line markings, surface painting, and road marking are all services that customers of Riggotts may request for various reasons. We have distilled their justifications to the top five reasons why you, the consumer, may want line marks.
  2. Enhancing one's visual appeal. Whether it's an underground parking garage, an inside warehouse, or a road, it's unacceptable to have subpar line markings that don't match the quality of the rest of the site's renovations. Line marking is a service that Riggotts consistently does well.
  3. Certain road markers must be in place by law. Occasionally, HSE legislation mandates that line marking be repainted or replaced because it has become worn or was installed improperly. If this doesn't happen, the repercussions might be rather severe. If, for example, the line markings on a runway are confusing or wrong, pilots cannot be trusted to land safely. The fallout from such a catastrophic event would be enormous.
  4. Increasing productivity nothing is more infuriating than a parking lot with no line marking, where automobiles are parked wherever they can find a spot, thus limiting the lot's capacity. Nonetheless, using line markings in a parking lot that has been strategically laid out to accommodate the greatest number of cars possible increases productivity.
  5. Guidance. You can only picture the carnage if roadways did not have line markers. Line markings help provide a sense of order and safety on the road by pointing cars in the right direction and drawing attention to possible hazards.


When properly done, line marking can aid in traffic control by giving drivers easily discernible cues to follow. It aids in reducing the likelihood of accidents by making things like traffic lanes and pedestrian crossings more obvious. Because of its ability to facilitate smoother traffic movement and less congestion, line marking is an essential technique for traffic management in congested locations.

Molly Crowe
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more