logo
logo
Sign in

How Do You Read a Level Gauge? Where Would One Use Them?

avatar
titanlogix

A level gauge is a kind of sensor and measuring device used to determine the height of a liquid or gas inside a tank or other containment system.


The fluid levels of drums, tanks, pressure vessels, and similar containers are commonly measured using these instruments in industrial applications. When the fluid being monitored is dangerous, or the tank or vessel housing the liquid is sealed under pressure, direct fluid volume measurements are not feasible or practicable, and a level gauge is used instead.


Some Common Varieties of Level Gauges Are as Follows


Reflex Level Gauges


Reflex Mobile Fluid Tank Gauges are based on light refraction and reflection principles. Glasses used in reflex glass leveling gauges have their front surfaces etched with prismatic grooves with a section aspect of 90 degrees. The chamber's bottom half is occupied with liquid at work, while the upper half stores gases or vapors.


The glass's varying luminosity between the liquid or gas/vapor regions is a visual indicator of the liquid level. No additional illumination is needed for the reflex level gauges. Daylight reveals the horizon line.


Transparent Level Gauges


The difference between a reflex and a transparent level gauge is that the latter uses two panes of glass on opposing sides of the chamber to let light travel through the section unimpeded. Evident level gauges use non-prism glass. 


These level gauges are helpful when observing both the liquid level and the liquid's properties at the same time is necessary. Transparent level gauges also help keep the boundary between two fluids. Because the liquid is less transparent than vapor, the gauge's chamber may be used to show the fluid level.


Magnetic Liquid-Level Gauges


For direct observation of the fluid in the sensor chamber, as with reflex, transparent, or bi-color level gauges, it is necessary to equip the gauge chamber with a transparent glass window. This layout has the potential downside of breaking or being influenced by corrosive chemicals breaking the glass within the gauge. 


These restrictions may become troublesome in a fluid spill that poses a health risk. In addition, level gauges that need a straight line of sight to read might be challenging to use when viewing from farther away or when poor lighting conditions.


Various Level Sensors


There are, of course, many more varieties of level gauges than just those described above. The fuel level indicator seen in most automobiles is a good example. Ultrasonic and guided wave radar are more technologies used in level gauges to determine fluid depth.


You may also use Mobile Fluid Tank Gauges to determine how much-compressed gas is left in containers of LNG or LP. Some depend on gravity, while others can detect temperature changes at the tank's surface at the vapor-liquid boundary.


Titan Logix is the author of this article. To know more about mobile fluid tank gauges please visit our website.


collect
0
avatar
titanlogix
guide
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more