logo
logo
Sign in

Benefits of Irrigation Controllers and Irrigation Valve Box

avatar
Melodie Megan

Sprinkler systems may be a little complex, as we all know. We can assist you with locating irrigation controllers, deciphering the functions of various wires, or troubleshooting your outdated controller. This introduction will help you become knowledgeable (and productive!) about lawn care and will help you grasp what you're dealing with.


Preventer of Backflow

Water is dispersed in only one direction in standard sprinkler systems: from the city to you. Backflow prevention measures are in place to stop any contaminated water from unintentionally returning to your clean water supply because it can happen occasionally. The backflow is activated in the spring when you start watering your lawn and then deactivated in the fall when you are done for the season.


Sprinkler Irrigation Valve Box

Your manifold and valves will often be located in your sprinkler valve box. There will occasionally be valves above ground. Start your search for your valves at the permitter of your home, as this is where valve boxes are typically located.


Control valve for pump

The pump valve is designed to automatically control water flow during system startup and shutdown in order to reduce hydraulic surges.


Chief valve

An electric valve placed at the irrigation system's primary water source is called a master valve. Because a leaking station valve can only leak when the master valve is applying pressure to the system, a master valve will significantly minimize any water loss caused by a leaky station valve. A master valve will also regulate water loss in the event that damage is done to the irrigation main line, allowing repairs to be made without cutting off the water supply. Installed upstream from the zone valves on the main line, an electric master valve is basically the same kind of valve that you would use for your zone valves. It is linked to your controller's "master" or "pump" connection.


Sustaining a constant soil moisture content is the aim of an irrigation system.

The controller is the most crucial component of your irrigation (sprinkler) system, even if it is a complicated system with check valves, pipes, control valves, main lines, lateral lines, various zones, rotor heads, spray heads, bubblers, drip lines, and everything in between. The controller functions as the central nervous system, directing the other components of the system when to irrigate the land.


The Irrigation controllers serves as the operation's brain.

You may not be aware, but your home's foundation is also shielded by your irrigation system.

The foundation of your house, which is most likely your largest investment, requires a steady supply of moisture from the earth. On the other side, insufficient water causes the soil to dry up and separate, while excessive water causes the soil to overexpand and potentially slough the foundation. Failure, cracking, and shifting of the foundation might result from either of these two sources. Furthermore, it is quite troublesome to alternate between periods of over- and under-saturation.


Author’s Bio:

Melodie Megan is the author of this website and writes articles for a long time. For further details about Water Sprinkler System in Lethbridge please visit the website.

collect
0
avatar
Melodie Megan
guide
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more