The SMC can modify a variety of essential functions on your Mac, hence making it an integral component. It is the hardware that incorporated into Mac’s motherboard and facilitates smooth system functioning. However, there are times when it can run into some trouble. If you are facing the same issue, then read through the blog to fix it effectively. Here is how you can reset the SMC on a Mac.

 What SMC helps to control

The SMC execute the given functions:

1. Takes action after the power button is pressed. Decides whether the click is for sleep, power off or caused by a misstep.
2. Identify and take action in closing or opening the lid of Mac.
3. Controls the performance of portable battery that includes calibration, charging and showing.
4. Manage keyboard backlighting.
5. Manage display backlighting.
6. Choose internal or external sources of videos on iMacs.
7. Launches hard drive power-up sequences alongside spin downs.
8. Manages sleep mode.

When to reset the SMC

1. Irregular performance of the sleep mode.
2. Mac unexpectedly going on sleep, even when it is being worked on.
3. No response from Mac to the opening and closing of the lid.
4. Fails to react to the click of power button.
5. The power indicator is incorrect.
6. When Target Display Mode is not active.
7. The battery is not able to charge or may take too much time to load.
8. USB ports malfunctioning.
9. Wi-Fi hardware is not working.
10. Bluetooth is not working.
11. Malfunctioning Status indicator lights.
12. Port lid of Mac Pro not switching off or on.

To Reset Mac’s SMC

The technique for resetting the SMC changes according to the version the user has. It is essential to switch off the Mac before resetting any SMC. If it is unable to shut down, then click the power button until it does.

Using User-Removable Batteries to Reset Mac Notebooks

 If you want to reset Mac Notebooks, then you can follow the provided steps:

1. Switch off the Mac.
2. Take out the battery.
3. Hold down the power button for more than 5 seconds.
4. Discharge it.
5. Put the battery back.
6. Switch the system on.

Resetting without Detachable Batteries

1. Switch off the system.
2. Click the left Control, Shift, and Option keys at the same time while holding down the power button.
3. Discharge all keys.
4. Switch on the system.

Resetting via Apple T2 chip

In case you intend to reset Mac using a T2 chip, then go through the below-mentioned steps:

1. Switch off the system.
2. Hold down the power button for around 10 seconds.
3. Discharge it and wait.
4. Click it again and switch on the system.

Another option could be:

1. Switch off the system.
2. Remove the power cord.
3. Now, wait for a bit.
4. Plugin again.
5. Wait again.
6. Hold down the power button to switch the system on.

SMC Reset for Mac Pro

1. Switch it off.
2. Unplug the cord.
3. Open the access panel.
4. Click on the SMC button.
5. Close the side door of Mac Pro.
6. Connect again.
7. Wait for 5 seconds.
8. Switch on the Mac.

Source: https://alexclara971353469.wordpress.com/2019/11/13/how-to-reset-system-management-controller-on-mac/

There are hundreds of thousands of people facing problems in moving their data from Mac to Windows. If you are one of them, then there is no need to be troubled anymore. You have come to the right place, and here you can get enough knowledge to overcome your problem. So, check the listed below steps to learn how to do it.

Methods to Transfer Data from Mac to Windows

Method 1: Set up File Sharing on a Mac

• Tap on the Apple icon available on the upper-left side of the screen.
• Go to System Preferences
• Choose the Sharing option.
• Now click on the checkbox present next to the File Sharing option.
• Press the Options button, and a new window will appear on your screen.
• Enable the Share files and folders using SMB checkbox.
• Also, tick the share files and folder using the AFP checkbox.
• At last, enter the user’s password and press the Done button to confirm it.

Access Mac Files on Windows

Now, after completing the steps as mentioned above, you need to follow the following points to access the Mac on windows and share data accordingly.

• Go to the File Explorer icon and double-click to open it.
• Type the IP address like \\192.168.168 according to your system.
• By doing such, a new window will pop up on your screen asking for username and password.
• Type your credentials and hit Enter. 

Method 2: Utilize a Cloud Storage Service

There are various dedicated cloudstorage applications available, like Google drive, dropbox, or One Drive. You can use any of them and overcome the issue, all you need to do is install any third-party application and upload your data on it. After doing so:

1. Go to Windows.
2. Open the drive.
3. Download the data. 

Method 3: Allocate your server

In case you have your web hosting, then it is one of the best options available. You can use it by uploading a file using FTP. Afterward, you will conveniently be able to download it back onto your other system without facing too many problems.

Method 4: Using a USB stick

A straightforward and effective way is using a USB stick. With this, you can quickly transfer data from Mac to Windows or vice-versa. Just plug in a USB flash drive in the system and choose the data you want to share. After completion of copying data in the flash drive, you need to plug it in another machine to copy the same.

Hence, use any of the methods described above and overcome your problem effortlessly.  

Alex Clara is a Microsoft Office expert and has been working in the technical industry since 2002. As a technical expert, She has written technical blogs, manuals, white papers, and reviews for many websites such as office.com/setup.

Source: http://msfoffice.com/how-to-move-data-from-mac-to-windows/

Bluestacks is our favorite Android emulator with a gaming focus, so we put together this list of the best games to play on the Bluestacks Android emulator.

Best games on Bluestacks Android emulator:

Editor’s note: This list will be updated regularly when new Bluestacks games are released.

Those features include improved graphics performance compared to even high-end smartphones, custom mappings for keyboards or bluetooth controllers, and multi-instance capabilities to play on more than one account at a time.

The advantages above make Bluestacks an ideal choice for a number of Android games.

It’s easy to stream to Twitch, YouTube, Facebook, and more using OBS or other streaming software.

As part of an expansion to its bug-bounty program, Apple says it will pay a $1 million reward to those who execute a specific iPhone hack.

The hack is known as a zero-click full chain kernel execution attack.

Additionally, the company says it's expanding the program to include platforms such as macOS, watchOS, and tvOS in addition to its iOS software that powers iPhones.

Visit Business Insider's homepage for more stories.

Apple is making some major changes to the bug-bounty program it introduced in 2016, including the introduction of a new million-dollar reward.

The company says it will pay out $1 million to security researchers who can carry out what is known as a zero-click full chain kernel execution attack with persistence.

After Apple streamlined the types of ports on its hardware, having adapters remains a necessary evil.

For now, at least the company has made a notable quality-of-life improvement to one of its AV dongles.

Apple recently released an updated version of the USB-C Digital AV Multiport Adapter.

This dongle has USB-C, USB-A, and HDMI ports, and the HDMI options got a little better.

The device now includes support for 4K video at 60 Hz as well as HDR video in either HDR10 or Dolby Vision.

This update is available when the video is coming from a 15-inch MacBook Pro from 2017 or later, a Retina iMac from 2017 or later, an iMac Pro, or an iPad Pro, and is plugged into a playback device that also supports 4K and HDR.

Sometimes, because of malicious software, you might have to turn off the proxy settings. When your device is infected, you may face disruptions with internet access. Hence, you will have to disable the proxy settings. Read on and learn how to do so. 

SOURCE: How to Turn Off Proxy Settings? , Zone Firewall

Using Chrome for Mac

If you want to turn off proxy settings in macOS through Google Chrome, you need to follow the steps given below.

●           Firstly, you have to launch Google Chrome on your macOS.

●           After that, you should click on the vertical ellipsis menu icon on your screen.

●           Then you have to go to Settings.

●           Thereafter, you should move down and click on the “Advanced” option.

●           Later, you have to click on “Open proxy settings” beneath the “System” section.

●           Now, you should click on “Proxies” option.

●           Then, you should uncheck all options beneath the “Select a protocol to configure.”

●           Click on OK. It’s at the bottom of the screen.

●           After that, you should click on Apply.

●           Now, the Google Chrome proxy settings are disabled.

Using Chrome for Windows

You need to turn off proxy settings in Windows through Google Chrome, here are the instructions given below.

●           Firstly, you have to launch Google Chrome on your computer.

●           After that, you should have to click on the vertical ellipsis menu icon of the window.

●           Then you should click on Settings.

●           Thereafter, you have to move down and click on the “Advanced” option.

●           Later, you should click on “Open proxy settings.”

●           Now, you should click on “LAN settings.”

●           You should uncheck the box of “Automatically detect settings.”

●           Then you have to uncheck the box of “Use a proxy server for your LAN.”

●           Thereafter select OK.

●           After that, click on Apply.

Using Safari for Mac

If you want to turn off proxy settings in macOS through Safari, you need to follow the steps given below.

●      Firstly, you have to launch Safari on your Mac.

●      After that, you have to click on the Safari menu.

●      Then you should click on Preferences.

●      Thereafter, you have to click on the “Advanced” option.

●      Later, you should change settings.

●      Now, you have to uncheck all the options on your screen.

●      Then you should click on OK.

Using Microsoft Edge for Windows

You can turn off proxy settings in Windows through Microsoft Edge. Here are the instructions given below.

●      Firstly, you have to launch Microsoft Edge on your computer.

●      After that, you should click on the menu icon.

●      Then you have to click on Settings.

●      Thereafter, you should click on the move down and select “View advanced settings” beneath the “Advanced settings.”

●      Later, you should go down and select “Open proxy settings.”

●      Now, you should switch the toggle of “Automatically detect settings” to the “Off” position.

Also switch the toggle of “Use a proxy server” to the “Off” position.

Harry Williams is an inventive person who has been doing intensive research in particular topics and writing blogs and articles for Zone Firewall on Norton, Webroot, McAfee, Microsoft Office and many other related topics. He is a very knowledgeable person with lots of experience. To get in touch with the internet security service provider, just dial 8449090430.

Apple is finally rewarding security researchers for finding security flaws in macOS.

At the Black Hat conference today, Apple announced that it is greatly expanding its existing bug bounty program to include macOS, tvOS, watchOS, and iCloud.

It will include rewards of up to $1 million for a zero-click, full chain kernel code execution attack.

While Apple originally started paying iOS bounties three years ago, researchers have only been paid for ones found in Apple’s mobile operating system.

macOS was never included, and it’s led to a number of security researchers pushing the company to change course.

Apple is now expanding its bug bounty program far behind just iOS.

Roughly three years ago, Apple began paying security researchers for discoveries of unknown vulnerabilities in iOS, and today, it’s responding to long-standing requests by adding macOS, watchOS, and tvOS devices to the list.

Additionally, the company is now offering a maximum reward of $1 million for the most serious security issues, providing researchers with even more incentive to report rather than horde their findings.

The news went public today at the annual Black Hat security conference in Las Vegas (via TechCrunch), where lead Apple security developer Ivan Krstić disclosed key updates to the bug bounty program.

Apple will now pay $1 million for a deadly serious exploit — a zero-click attack that enables complete, persistent control of an iPhone’s kernel with nothing more than knowledge of the device’s phone number — up from a peak of $200,000 before.

Less serious exploits will qualify for smaller amounts.

For the company, the risk of low payments has been that security researchers will instead hand their findings off to private organizations, such as Grayshift and Cellebrite, that will subsequently exploit Apple’s devices for profit.

Apple is finally giving security researchers something they’ve wanted for years: a macOS bug bounty.

The technology giant said Thursday it will roll out the bug bounty program to include Macs and MacBooks, as well as Apple TV and Apple Watch, almost exactly three years after it debuted its bug bounty program for iOS.

The idea is simple: you find a vulnerability, you disclose it to Apple, they fix it — and in return you get a cash payout.

These programs are wildly popular in the tech industry as it helps to fund security researchers in exchange for serious security flaws that could otherwise be used by malicious actors, and also helps fill the void of bug finders selling their vulnerabilities to exploit brokers, and on the black market, who might abuse the flaws to conduct surveillance.

Some security researchers had flat-out refused to report security flaws to Apple in absence of a bug bounty.

At the Black Hat conference in Las Vegas, head of security engineering and architecture Ivan Krstić announced the program to run alongside its existing iOS bug bounty.

It works almost seamlessly and is so much more secure than rival systems without being a burden or getting in your way.

Well, that may soon change, as Apple has just been granted a patent for a Face ID-like system that can be implemented in a MacBook.

As I opined last month, this is long overdue.

Its basic idea is that a Mac could be equipped with a set of sensors that detect when you’re near your Mac and, like the dancing elves staring through my bedroom window at night, prevent it from going to sleep.

Where it gets interesting is where the patent mentions what happens if the sensors detect that a person is nearby: “If the [detected] object is a person, the device determines a position of the person relative to the computing device and executes a change of state in the computing device based on the position of the person relative to the computing device.”

Once you penetrate the dense patent-speak, it seems to us this is describing a system that could potentially log you in to your Mac if it recognizes your face.