Macbook Not Charging Repair in AdelaideMacbook not charging repair is a repair which involves the charging circuit or charging pins on Macbooks.

There are a couple of possible faults causing this issue, all depending on what happened to the Macbook.

Most of the times we see it as a result of either faulty/knock off charger or water damage on the Macbook.No Light on the charger – Macbook Air not charging RepairWith Macbook Air before 2018 model, the chargers used to have a light showing if it is charging or not.

Unfortunately, new Macbook’s don’t have this light and is hard to see if Macbook is charging or not.Why and How it happens?In most cases, Macbook not charging repair is required when there is a spillage caused by liquid damage.Macbook Air Faulty DC-IN boardIn some cases, this damage stops at the DC-IN board with MacBook Air.

DC-IN board is a small logic board which receives an input voltage from the adapter and transfers it into the logic board.

There is a flex cable on this board which often oxidizes from water damage.Macbook USB-C charging port repairIn other cases, it is the USB-C connectors which may be oxidised or corroded from liquid and may be as simple as replacing or repairing charging flex connectors.Oxidised and destroyed traces for the charging chip of Macbook A1708Furthermore, there could be an issue with the logic board itself, especially with the charging IC or circuit.

We specialize in Macbook Repairs Adelaide.

Here we repair from water damage Macbook repair to Macbooks not turning on repairs.Macbook Pro won’t turn on repair – Macbook Repairs AdelaideAs we specialize in electronics, we can read schematics and understand how chips and components on these Macbooks work.

For example, the snapshot underneath is a schematic view of the charging chip found most often in new Macbooks.Next to it, is a logic board layout view of the schematic.

This helps us to find those tiny components on the board and identify them.

Last on the right is the actual picture of the chip under a microscope.

These components are tiny and working with them requires experience and good quality equipment, resulting in faster and high-quality Macbook Repairs in AdelaideCircuit Design, Board View and Microscope view of the ISL9239 charging chipon Macbook ProWe became so good in our job over the past 15 years, that now we can offer an accurate quote over the phone or chat.Also, we keep receiving exceptional reviews from our customers.Furthermore, our Macbook Repair Service provides comprehensive and complete Macbook Repairs Solution here in Adelaide.

Macbook won’t Turn on Repair in AdelaideMacbook will not turn on Repair is a type of repair which in most cases is caused by a malfunctioning logic board.The logic board is the main board which holds all the components soldered into it.

It is one of the most expensive parts in these Macbooks.

Replacement of which can be close to the cost of the Macbook itself.That's the reason we do try to repair them, that way we can keep the cost low as well as ensure that you are not losing your data.New generation Macbooks, manufactured after 2018 are designed with solid-state drive incorporated within the logic board.

There is no more modular design, where we can take out the SSD drive and extract the data in our data recovery system.Macbook logic board viewWhat causes it?Tiny breadcrumb on the middle top part of the logic boardAs seen in the picture, these components have a high density and are small in size.

Black resistors on the right corner are as big as the tip of a needle!With the case of this Macbook, a small breadcrumb was enough to oxidate and short a component.AIn other cases it could be a knock off charger which may have sent higher than expected voltage and burn a charging chip or short a capacitor.SolutionNot every Macbook is repairable of course.

But we do our best in giving them a fair chance to be useful again.