Sachiya Steel International offers a broad spectrum of Hastelloy C22 Flanges to the esteemed clients, which are manufactured by using pristine grade stainless steel. Hastelloy C22 Slip On Flanges (UNS N06022) is used in Chlorination systems, Nuclear fuel reprocessing, Pickling systems, and more. Hastelloy C22 Threaded Flanges has outstanding resistance to both reducing and oxidizing media and because of its resistibility can be used where “upset” conditions are likely to occur.
Hastelloy C22 Spectacle Blind Flanges is also in a wide variety of hazardous waste management technologies where high corrosion – resistance of critical equipment is required for reliability, safety, and cost effectiveness / reduced maintenance. Meanwhile, these Hastelloy C22 Weld Neck Flanges are also being offered in customized sizes and shapes to our customers. We also offer these Hastelloy C22 Lap Joint Flanges at market leading rates.
A common solution for assessing the resistance of Hastelloy C22 Socket Weld Flanges to this extremely destructive form of attack is boiling 45 % magnesium chloride, typically with stressed U-bend samples. Crevice tests of Hastelloy C22 Ring Joint Type Flanges were performed in both still (quiescent) and flowing seawater, at 29 Degree C, plus or minus 3 Degree C. As is evident from the following results, Hastelloy C22 Nippo Flanges are much more resistant to this form of attack than the comparative, austenitic stainless steels. We also offer these Hastelloy C22 Spacer Flanges at reasonable rates with customized options for its sizes, shapes and designs.
Hastelloy C22 Pipe Flanges Specifications |
||
Specifications | : | ASTM B564 / ASME SB564 |
Size | : | 1/2″NB TO 60″NB |
Standards |
: | ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. |
Class / Pressure | : | 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. |
Standard | : | ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc. |
Grade | C | Mn | Si | S | Co | Ni | Cr | Fe | Mo | P |
C22 | 0.010 max | 0.50 max | 0.08 max | 0.02 max | 2.50 max | 50.015 min* | 20.00 – 22.50 | 2.00 – 6.00 | 12.50 – 14.50 | 0.02 max |
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Hastelloy C22 | 8.69 g/cm3 | 1399 °C (2550 °F) | Psi – 1,00,000 , MPa – 690 | Psi – 45000 , MPa – 310 | 45 % |
STANDARD | WERKSTOFF NR. | UNS | JIS | GOST | EN | OR |
Hastelloy C22 | 2.4602 | N06022 | NW 6022 | – | NiCr21Mo14W |
–
|
For More Details Visit Our Website |
https://steeltube.co.in/ |
Email Us: [email protected] |
Contact Us: +919769056007 |