Sachiya Steel International deals in an all-embracing range of Inconel Alloy 718 Tube to Female Pipes, which is age – harden able with a unique property of slow aging response that permits heating and cooling during annealing without the danger of cracking. Inconel 718 Tube Fittings can be readily machined but due to its high strength and work hardening characteristics, tooling, operating speeds and coolants should be considered.
After fabrication, Inconel 718 Compression Fittings can be heat treated as required and as per the applicable specification. Inconel 718 Female Connector Fittings is usually provided in the solution annealed condition, but can be also being supplied in the aged hardened or precipitation heat treated condition prior to forming. Inconel 718 Ferrule Fittings has been used world – wide in aerospace, aircraft, oil, and chemical industries, and also nuclear power plants because of its high strength, excellent ductility, good formability and weldability, etc.
Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes
These Inconel 718 Double Ferrule Fittings is actually an age – harden able Nickel – Chromium – Columbium (Niobium) – Molybdenum alloy with high strength, corrosion – resistance, and good fabrication characteristics. Inconel 718 Compression Tube Fittings is a high strength nickel – chromium material and a nickel super alloy frequently used for cryogenic storage tanks, turbines, down hole shafting and well head parts. We have met every challenge of providing quality, timely, cost – effective solutions for these Alloy 718 Tube Fittings and specialty fastener applications.
|
Inconel 718 Tube to Female Pipes Specifications
|
||
| Specifications | : | ASTM B366 ASME SB 366 |
| Size | : | OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″ |
| Thread | : | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Pressure Rating |
: | 3000 – 7180 PSI |
| Applicable Temperature |
: | 150-400 C |
| Type |
: | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting. |
| Grade | C | Mn | Si | Fe | S | Cr | Al | Ni | |
| 718 | min. | – | – | – | bal | – | 17.0 | 0.2 | 50.0 |
| max. | 0.08 | 0.35 | 0.35 | bal | 0.01 | 21.0 | 0.8 | 55.0 | |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation | ||
| 825 | 8.14 g/cm3 |
|
Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
| Grade | UNS No | Old British | Euronorm | GOST | Japanese JIS | ||
| BS | En | No | AFNOR | ||||
| Inconel 718 | N07718 | – | – | 2.4668 | – | – | – |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
For more details:
E-Mail: sales@sachiyasteel.com
Phone: +91 9769056007
Web: https://steeltube.co.in/
Sachiya Steel International is one of the leading manufacturer and exporter of Inconel Alloy 718 Tube to Male Fittings, which is relatively suggested amongst the customers for their trouble free performance.
Composition of our Inconel 718 Tube Fittings offers a soaring level of corrosion resistance and potency, which can be age – hardened by the addition of titanium and aluminum.
These Inconel 718 Compression Fittings offers excellent strength for up to 538 Deg C, which is a precipitation – harden able iron- nickel-chromium alloy by means of accompaniments of copper and molybdenum.Our Inconel 718 Male Connector Fittings combines the soaring potency of a precipitation – harden able alloy by means of the outstanding corrosion resistance of INCOLOY alloy 718 Tube Fittings.
Meanwhile, these Inconel 718 Compression Tube Fittings (UNS N07718) are also being offered in different sizes and shapes to our customers.
Our Inconel 718 Ferrule Tube Fittings also finds several applications in rocket engines and cryogenic environments due to its good toughness at low temperature (preserving parts from a brittle fracture).Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male FittingsThese Inconel 718 Double Ferrule Tube Fittings has high temperature resistant, which is then fabricated in its most malleable condition.
Our Alloy 718 Tube Fittings is hardened by the precipitation of secondary nickel – (aluminum, titanium, and niobium) phases giving the alloy a combination of high strength and good corrosion resistance.
Sachiya Steel International is one of the leading manufacturer and exporter of Inconel 718 Tube to Male Fittings, which is relatively suggested amongst the customers for their trouble free performance.
Composition of our Inconel 718 Tube Fittings offers a soaring level of corrosion resistance and potency, which can be age – hardened by the addition of titanium and aluminum.
These Inconel 718 Compression Fittings offers excellent strength for up to 538 Deg C, which is a precipitation – harden able iron- nickel-chromium alloy by means of accompaniments of copper and molybdenum.
Our Inconel 718 Male Connector Fittings combines the soaring potency of a precipitation – harden able alloy by means of the outstanding corrosion resistance of INCOLOY alloy 718 Tube Fittings.Meanwhile, these Inconel 718 Compression Tube Fittings (UNS N07718) are also being offered in different sizes and shapes to our customers.
Our Inconel 718 Ferrule Tube Fittings also finds several applications in rocket engines and cryogenic environments due to its good toughness at low temperature (preserving parts from a brittle fracture).
These Inconel 718 Double Ferrule Tube Fittings has high temperature resistant, which is then fabricated in its most malleable condition.Our Alloy 718 Tube Fittings is hardened by the precipitation of secondary nickel – (aluminum, titanium, and niobium) phases giving the alloy a combination of high strength and good corrosion resistance.
Sachiya Steel International is one of the leading manufacturer and exporter of Inconel 718 Tube to Union Fittings to the clients, which is widely demanded for its durability and sturdiness.
These Inconel 718 Tube Fittings (UNS N07718) has excellent creep – rupture strength at temperatures up to 700 Degree C (1300 Degree F).
Our Inconel 718 Compression Fittings also displays exceptionally high yield, tensile, and creep-rupture properties at high temperatures.
These Inconel 718 Ferrule Fittings can be readily worked and age hardened, which further has higher strength than Inconel X – 750 Ferrule Fittings.Our Inconel 718 Double Ferrule Fittings is a precipitation – harden able nickel – chromium alloy containing also significant amounts of iron, niobium, and molybdenum along with lesser amounts of aluminum and titanium.
Meanwhile, these Inconel 718 Union Fittings are also being offered in different sizes and shapes to our customers.
If the material is to be machined, formed, or welded, our Inconel 718 Compression Tube Fittings typically is purchased in the mill annealed or stress relieved condition.Inconel 718 Tube to Union Fittings | Inconel 718 Tube to Union Fittings | Inconel 718 Tube to Union Fittings | Inconel 718 Tube to Union Fittings | Inconel 718 Tube to Union Fittings | Inconel 718 Tube to Union Fittings | Inconel 718 Tube to Union Fittings | Inconel 718 Tube to Union Fittings | Inconel 718 Tube to Union FittingsThese Alloy 718 Tube Fittings has resistant to aqueous corrosion and chloride ion stress corrosion cracking.
Sachiya Steel International offers a wide range of Inconel Alloy 601 Tube to Female Pipes, where oxidation resistance is further enhanced by the aluminum content.
Inconel 601 Tube Fittings is used in several industries such as Thermal Processing, Power Generation, Aerospace and Chemical Processing.
Tubing in these Inconel 601 Compression Fittings has been used in ceramic tile production in the latest designs of roller hearth ovens as the material resists the high temperature firing cycle and the corrosive effects of the glazes and stucco applied to the tiles.Inconel 601 Female Connector Fittings is often used in Radiant tubes, Steam super – heater tube supports, Muffles and retorts, Strand annealing tubes, etc.
These Inconel 601 Ferrule Fittings has good strength, toughness and ductility, and can be used at cryogenic temperatures.
All standard machining operations may be performed on Inconel 601 Double Ferrule Fittings, where best machinability is obtained in the solution – treated condition.Inconel Alloy 601 Tube to Female Pipes | Inconel Alloy 601 Tube to Female Pipes | Inconel Alloy 601 Tube to Female Pipes | Inconel Alloy 601 Tube to Female Pipes | Inconel Alloy 601 Tube to Female Pipes | Inconel Alloy 601 Tube to Female Pipes | Inconel Alloy 601 Tube to Female Pipes | Inconel Alloy 601 Tube to Female Pipes | Inconel Alloy 601 Tube to Female PipesIn pollution – control applications, these Inconel 601 Compression Tube Fittings is used for thermal reactors in exhaust systems of gasoline engines and for combustion chambers in solid – waste incinerators.
Alloy 601 Tube Fittings is also used in tube supports grid barriers, and ash – handling systems for power generation equipment.
