Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High-Quality Inconel 718 Wire Mesh to customers. This Inconel 718 Wire is an oxidation and corrosion-resistant nickel alloy which is used both for its soaring potency and exceptional aqueous corrosion resistance. The power of Inconel 718 Wire Mesh is mainly a solid solution effect from columbium and molybdenum. This Inconel 718 Hexagonal Wire Mesh is a promising selection for seawater uses, and so is extremely resistant to an extensive collection of mineral and organic acids.
For More Information Visit Our Website: Sachiya Steel International
Email us: [email protected]
Contact us: +91 9769056007
Sachiya Steel International is a known firm that is involved in manufacturing qualitative collection of Inconel 718 Wire Mesh to the customers.
This Inconel 718 Wires is an oxidation and corrosion resistant nickel alloy which is used both for its soaring potency and exceptional aqueous corrosion resistance.
The power of Inconel 718 Wire Mesh is mainly a solid solution effect from columbium and molybdenum.
This Inconel 718 Hexagonal Wire Mesh is a promising select for sea water uses, and so is extremely resistant in an extensive collection of mineral and organic acids.Alloy 718 Welding Wire Mesh (UNS N07718) resists an extensive collection of sternly corrosive atmospheres and is particularly resistant to crevice and pitting corrosion.
Meanwhile, this Inconel 718 Netting Wire Mesh is also being offered in different sizes and shapes to our customers.Alloy 718 Woven Wire Mesh achieves high-strength levels from the solid solution effects of Molybdenum and Niobium (Columbium) from room temperature up to 800 Degree C. For high temperature applications above 600 Degree C (1112 Degree F), this solution annealed Inconel 718 Spring Steel Wire Mesh is generally used.
There is almost no attack in mild environments of Inconel 718 Fencing Wire Mesh such as fresh and sea water, alkaline media and neutral pH environment.
Sachiya Steel International is one of the Leading Manufacturer And Exporters of Inconel 718 Flanges to clients, which has excellent features such as sturdy construction, durability, high performance, and more.
One of the distinguishing features of our Inconel 718 Slip-On Flanges’ (UNS N07718) composition is the addition of niobium to permit age-hardening which allows annealing and welding without spontaneous hardening during heating and cooling.
These Inconel 718 Threaded Flanges are used for aerospace, gas turbines, rocket motors, spacecraft, space shuttles, nuclear reactors, pumps, turbopump seals, and tooling.Hot-working in our Inconel 718 Blind Spectacle Flanges is carried out using a 2050 Degree F (1121 Degree C) maximum furnace temperature.
These Inconel 718 Weld Neck Flanges are age hardenable and may be welded in fully aged condition.
Meanwhile, our Inconel 718 Blind Flanges are as well being offered in different sizes and shapes to our customers.
These Inconel 718 Socket Weld Flanges is also used in jet engines, pump bodies and parts, rocket motors and thrust reversers, nuclear fuel element spacers, hot extrusion tooling, etc.Inconel 718 Flanges | Inconel 718 Flanges | Inconel 718 Flanges | Inconel 718 Flanges | Inconel 718 Flanges | Inconel 718 Flanges | Inconel 718 Flanges | Inconel 718 FlangesOur Inconel 718 Lap Joint Flanges represents about half of their world tonnage and is considered a refractory super – alloy since it can be used permanently above 600 Degree C. The addition of niobium acts with the molybdenum to stiffen the matrix of these Inconel 718 Ring Type Joint Flanges and provide high strength without strengthening heat treatment.Inconel 718 Pipe Flanges SpecificationsSpecifications:ASTM B564 / ASME SB564Size:1/2″NB TO 60″NBStandards:ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.Class / Pressure:150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.Standard:ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.Inconel Alloy 718 Pipe Flanges Chemical CompositionGradeCMnSiSCuFeNiCrInconel 7180.08 max0.35 max0.35 max0.015max0.30 max–50.00 – 55.0017.00 – 21.00Inconel 718 Plate Flanges Mechanical PropertiesElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)ElongationInconel 7188.2 g/cm31350 °C (2460 °F)Psi – 1,35,000 , MPa – 930Psi – 75,000 , MPa – 48245 %Equivalent Grades for 718 Inconel Industrial Pipe FlangesSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENInconel 7182.4668N07718–––––Alloy 718 Flanges Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes, Tubes, Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Inconel 718 Round Bars, where the age – hardened condition gives better chip action on chip breaker tools and produces a better finish.
Inconel 718 Square Bars accounts for up to 50 % of the weight of aircraft turbojet engines, being the main component for discs, blades and casing of the high pressure section of the compressor and discs as well as some blades of the turbine section.
The precipitation of this nickel – (aluminum, titanium, and niobium) phases in Inconel 718 Flat Bars is induced by heat treating in the temperature range of 1100 Degree F to 1500 Degree F.This is the preferred treatment in tensile – limited applications for Inconel 718 Threaded Bars as it produces the best transverse ductility in heavy sections, impact strength and low temperature notch tensile strength.
Common Applications of Inconel 718 Hollow Bars: Jet engine components, Oil & gas, and Gas turbine operations.
Inconel 718 Hexagonal Bars has good mechanical properties – tensile, fatigue and creep – rupture.Inconel 718 Round Bars | Inconel 718 Round Bars | Inconel 718 Round Bars | Inconel 718 Round Bars | Inconel 718 Round Bars | Inconel 718 Round Bars | Inconel 718 Round BarsInconel 718 Triangular Bars is often used in aerospace, rocket motors, space shuttles, spacecraft, nuclear reactors, turbo pump seals, tooling and pumps.
Inconel 718 Bars has excellent weldability when compared to the nickel – base super alloys hardened by aluminum and titanium.
Sachiya Steel International is a Leading Manufacturer And Exporter of Inconel 718 Pipe Fittings, which has excellent welding characteristics and resistant to post – weld age cracking.
Inconel 718 Compression Pipe Fittings contains significant amounts of Iron, lowering its price per kilogram while endowing it with precipitation hardening effect.
The 1700 Degree F – 1850 Degree F anneal with its corresponding aging treatment as shown earlier is the optimum heat treatment for Inconel 718 Compression Fittings where a combination of rupture life, notch rupture life and rupture ductility is of greatest concern.Machining in the age hardened condition improves the surface finish and chip action of Inconel 718 Accessories, whereas machinability and tool life are improved when machining material in the solution annealed condition.
These Inconel 718 Ferrule Pipe Fittings is available in seamless and welded construction, and has high tensile, yield, and creep – rupture properties at high temperatures and can operate at cryogenic temperatures up to 1200 Degree F (650 Degree C).Inconel 718 Pipe Fittings | Inconel 718 Pipe Fittings | Inconel 718 Pipe Fittings | Inconel 718 Pipe Fittings | Inconel 718 Pipe Fittings | Inconel 718 Pipe Fittings | Inconel 718 Pipe FittingsBesides two conventional forging processes of Inconel 718 Double Ferrule Pipe Fittings, including forging driven by hydraulic presses or hammers, and some advanced forging processes, such as hot die forging, insulation die forging and isothermal forging, have been developed to manufacture fine grains forgings.
High tolerance to extremely high and low temperatures allows these Alloy 718 Compression Fittings to be welded and annealed into products that will withstand extreme conditions.Inconel 718 Pipe Fittings / Accessories SpecificationsSpecifications:ASTM B166 ASME SB 166Size:1/16″ – 2″Ends:Threaded, Welding, JICPressure Rating:1000 Psi, 3000 Psi, 7180 Psi, 10000 PsiThreads:NPT , BSPT, BSPPInconel 718 Pipe Fittings Chemical CompositionGradeCMnSiSCuFeNiCrInconel 7180.08 max0.35 max0.35 max0.015max0.30 max–50.00 – 55.0017.00 – 21.00 Alloy 718 Accessories Mechanical PropertiesElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)ElongationInconel 7188.2 g/cm31350 °C (2460 °F)Psi – 1,35,000 , MPa – 930Psi – 75,000 , MPa – 48245 %Equivalent Grades for 718 Inconel Pipe FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENInconel 7182.4668N07718–––––Alloy 718 Pipe Fittings / Accessories Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.Email: [email protected] For More Information Visit Our Website: Sachiya Pipe Fittings
