Sachiya Steel International is one of the leading manufacturer and exporter of Inconel 718 Tube to Male Fittings, which is relatively suggested amongst the customers for their trouble free performance. Composition of our Inconel 718 Tube Fittings offers a soaring level of corrosion resistance and potency, which can be age – hardened by the addition of titanium and aluminum. These Inconel 718 Compression Fittings offers excellent strength for up to 538 Deg C, which is a precipitation – harden able iron- nickel-chromium alloy by means of accompaniments of copper and molybdenum. Our Inconel 718 Male Connector Fittings combines the soaring potency of a precipitation – harden able alloy by means of the outstanding corrosion resistance of INCOLOY alloy 718 Tube Fittings.
Meanwhile, these Inconel 718 Compression Tube Fittings (UNS N07718) are also being offered in different sizes and shapes to our customers. Our Inconel 718 Ferrule Tube Fittings also finds several applications in rocket engines and cryogenic environments due to its good toughness at low temperature (preserving parts from a brittle fracture). These Inconel 718 Double Ferrule Tube Fittings has high temperature resistant, which is then fabricated in its most malleable condition.
Our Alloy 718 Tube Fittings is hardened by the precipitation of secondary nickel – (aluminum, titanium, and niobium) phases giving the alloy a combination of high strength and good corrosion resistance. These Alloy 718 Compression Fittings is often used in springs, valves, aircraft and land – based turbine engines.
|
Inconel 718 Tube to Male Fittings Specifications
|
||
| Specifications | : | ASTM B366 ASME SB366 |
| Tube Size | : | 6mm to 38mm to 1/4″ to 1 1/2″ |
| Thread |
: | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Brass | : | ASTM B16 ASTM B 453 |
| Pressure Rating | : | 6000PSI for Inconel, 300/1000/3000PSI for Brass |
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 718 | 0.08 max | 0.35 max | 0.35 max | 0.015max | 0.30 max | – | 50.00 – 55.00 | 17.00 – 21.00 |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 718 | 8.2 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 482 | 45 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 718 | 2.4668 | N07718 | – | – | – | – | – |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Email: [email protected]
For More Information Visit Our Website : Sachiya Steel International
Sachiya Steel International is one of the leading manufacturer and exporter of Inconel Alloy 718 Tube to Male Fittings, which is relatively suggested amongst the customers for their trouble free performance.
Composition of our Inconel 718 Tube Fittings offers a soaring level of corrosion resistance and potency, which can be age – hardened by the addition of titanium and aluminum.
These Inconel 718 Compression Fittings offers excellent strength for up to 538 Deg C, which is a precipitation – harden able iron- nickel-chromium alloy by means of accompaniments of copper and molybdenum.Our Inconel 718 Male Connector Fittings combines the soaring potency of a precipitation – harden able alloy by means of the outstanding corrosion resistance of INCOLOY alloy 718 Tube Fittings.
Meanwhile, these Inconel 718 Compression Tube Fittings (UNS N07718) are also being offered in different sizes and shapes to our customers.
Our Inconel 718 Ferrule Tube Fittings also finds several applications in rocket engines and cryogenic environments due to its good toughness at low temperature (preserving parts from a brittle fracture).Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male Fittings | Inconel Alloy 718 Tube to Male FittingsThese Inconel 718 Double Ferrule Tube Fittings has high temperature resistant, which is then fabricated in its most malleable condition.
Our Alloy 718 Tube Fittings is hardened by the precipitation of secondary nickel – (aluminum, titanium, and niobium) phases giving the alloy a combination of high strength and good corrosion resistance.
Sachiya Steel International is one of the leading manufacturer and exporter of Inconel 718 Tube to Union Fittings to the clients, which is widely demanded for its durability and sturdiness.
These Inconel 718 Tube Fittings (UNS N07718) has excellent creep – rupture strength at temperatures up to 700 Degree C (1300 Degree F).
Our Inconel 718 Compression Fittings also displays exceptionally high yield, tensile, and creep-rupture properties at high temperatures.
These Inconel 718 Ferrule Fittings can be readily worked and age hardened, which further has higher strength than Inconel X – 750 Ferrule Fittings.Our Inconel 718 Double Ferrule Fittings is a precipitation – harden able nickel – chromium alloy containing also significant amounts of iron, niobium, and molybdenum along with lesser amounts of aluminum and titanium.
Meanwhile, these Inconel 718 Union Fittings are also being offered in different sizes and shapes to our customers.
If the material is to be machined, formed, or welded, our Inconel 718 Compression Tube Fittings typically is purchased in the mill annealed or stress relieved condition.Inconel 718 Tube to Union Fittings | Inconel 718 Tube to Union Fittings | Inconel 718 Tube to Union Fittings | Inconel 718 Tube to Union Fittings | Inconel 718 Tube to Union Fittings | Inconel 718 Tube to Union Fittings | Inconel 718 Tube to Union Fittings | Inconel 718 Tube to Union Fittings | Inconel 718 Tube to Union FittingsThese Alloy 718 Tube Fittings has resistant to aqueous corrosion and chloride ion stress corrosion cracking.
Sachiya Steel International deals in an all-embracing range of Inconel Alloy 718 Tube to Female Pipes, which is age – harden able with a unique property of slow aging response that permits heating and cooling during annealing without the danger of cracking.
Inconel 718 Tube Fittings can be readily machined but due to its high strength and work hardening characteristics, tooling, operating speeds and coolants should be considered.After fabrication, Inconel 718 Compression Fittings can be heat treated as required and as per the applicable specification.
Inconel 718 Female Connector Fittings is usually provided in the solution annealed condition, but can be also being supplied in the aged hardened or precipitation heat treated condition prior to forming.
Inconel 718 Ferrule Fittings has been used world – wide in aerospace, aircraft, oil, and chemical industries, and also nuclear power plants because of its high strength, excellent ductility, good formability and weldability, etc.Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female Pipes | Inconel Alloy 718 Tube to Female PipesThese Inconel 718 Double Ferrule Fittings is actually an age – harden able Nickel – Chromium – Columbium (Niobium) – Molybdenum alloy with high strength, corrosion – resistance, and good fabrication characteristics.
Inconel 718 Compression Tube Fittings is a high strength nickel – chromium material and a nickel super alloy frequently used for cryogenic storage tanks, turbines, down hole shafting and well head parts.
We have met every challenge of providing quality, timely, cost – effective solutions for these Alloy 718 Tube Fittings and specialty fastener applications.Inconel 718 Tube to Female Pipes SpecificationsSpecifications:ASTM B366 ASME SB 366Size:OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Pressure Rating:3000 – 7180 PSIApplicable Temperature:150-400 CType:Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
Sachiya Steel International is one of the leading manufacturer and exporter of Inconel 600 Tube to Male Fittings in various sizes and dimensions, which has Carburization resistance and Oxidation resistance to 2000 Degree F. Heavy duty machining equipment and tooling in Inconel 600 Tube Fittings should be used to minimize chatter or work – hardening of the alloy ahead of the cutting.
Besides heat – treating industries, Inconel 600 Compression Fittings is as well used in furnace component, aerospace, pulp and paper, chemical industries and nuclear engineering.
Inconel 600 Compression Tube Fittings is a superior choice for: heat exchanger tubing and nuclear reactor vessels.Typical corrosion applications of Inconel 600 Male Connector Fittings include titanium dioxide production (chloride route), vinyl chloride monomer (VCM), magnesium chloride, and perchloroethylene syntheses.
Softening by annealing begins at about 1600 Degree F (871 Degree C), these Inconel 600 Ferrule Fittings is reasonably complete after 10 to 15 minutes of heating at 1800 Degree F (982 Degree C).Inconel 600 Double Ferrule Fittings is slightly more machinable compared to 304 stainless steel and should be performed by means of tools large enough to handle the loads.
Applications of Alloy 600 Tube Fittings include heaters, bubble towers, stills and condensers for processing of fatty acids.
Alloy 600 Male Connector Fittings is combination of Nickel Chromium and Iron provides a standard material for the chemical industry and the automotive engine, aero – engine and airframe sectors.Inconel 600 Tube to Male Fittings SpecificationsSpecifications:ASTM B366 ASME SB366Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Inconel, 300/1000/3000PSI for BrassInconel Alloy 600 Tube To Male Fittings Chemical CompositionGradeCMnSiSCuFeNiCrInconel 6000.15 max1.00 max0.50 max0.015max0.50 max6.00 – 10.0072.00 min14.00 – 17.00Inconel 600 Tube To Male Fittings Mechanical PropertiesElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)ElongationInconel 6008.47 g/cm31413 °C (2580 °F)Psi – 95,000 , MPa – 655Psi – 45,000 , MPa – 31040 %Equivalent Grades for 600 Inconel Ferrule Fitting Tube To Male FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENInconel 6002.4816N06600NCF 600NA 13МНЖМц 28-2,5-1,5NC15FE11MNiCr15Fe Alloy 600 Tube To Male Fittings Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
