Sachiya Steel International offers a wide range of Incoloy 825 Angle And Other Incoloy Products, which are often used in Chemical process vessels and Catalytic cracking units. The nickel content in our Incoloy 825 Angle provides resistance to chloride – ion stress corrosion cracking, where carbide tools are recommended for turning with a continuous cut. A variety of media corrosion of nuclear – burning dissolver show this Incoloy 825 C-Channel high integrated property, such as sulfuric acid, potassium hydroxide and nitric acid are all dealing in a same device.
Our Incoloy 825 H-Beam is not necessary to preheat, but surfaces to be welded must be clean from paint, oil or crayon markings and any residual lubricants used in the forming process. For maximum corrosion resistance in this Incoloy 825 I-Beam, hot worked parts should be stabilizing annealed before use. The chromium and molybdenum content of our Incoloy 825 T-Beam provides resistance to chloride pitting, as well as resistance to a variety of oxidizing atmospheres. This Incoloy 825 Chain has good mechanical properties from cryogenic temperatures to moderately high temperatures.
Incoloy 825 Angle | Incoloy 825 Angle | Incoloy 825 Angle | Incoloy 825 Angle | Incoloy 825 Angle | Incoloy 825 Angle
The following properties are applicable to our Alloy 825 Angle at room and elevated temperatures in the annealed respectively stabilized temper and indicated size ranges. A nickel – iron – chromium alloy with additions of molybdenum and copper, this Alloy 825 C-Channel has excellent resistance to both reducing and oxidizing acids, to stress – corrosion cracking, and to localize attack such as pitting and crevice corrosion.
Incoloy 825 Angle, Channel, Beam, Chain Specifications |
||
| Specifications | : | ASTM B425 / ASME B425 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Incoloy 825 Angle |
: | 5mm to 9mm |
| Incoloy 825 Channel |
: | 40mm*20mm~300mm*300mm |
| Incoloy 825 Beam | : | 3″ thru 12.31″ |
| Incoloy 825 Chain |
: | 1/8 inch – 1/2 inch Diameter |
| Thickness |
: | 3.0mm – 120mm |
| Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
| Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
825 Incoloy Angle, Channel, Beam, Chain Chemical Composition
| Grade | C | Mn | Si | Al | S | Cr | Cu | Ni | Fe | Ti |
| Incoloy 800 | 0.05 max | 1.00 max | 0.05 max | 0.02 max | 0.03 max | 19.50-23.50 | 1.50-3.00 | 38.0-46.0 | 22.0 min | 0.06 – 1.20 |
Incoloy 825 Angle, Channel, Beam, Chain Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30% |
Equivalent Grades for 825 Incoloy Angle, Channel, Beam, Chain
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| Incoloy 825 | 2.4858 | N08825 | NCF 825 | NA 16 | ЭП703 | NFE30C20DUM | NiCr21Mo | XH38BT |
Incoloy 825 Angle, Channel, Beam, Chain Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas ProceIncoloying
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
For more details:
E-Mail: [email protected]
Phone: +91 9769056007
Web: https://steeltube.co.in/
Sachiya Steel International offers a wide range of Incoloy 825 Angle, which are often used in Chemical process vessels and Catalytic cracking units.
The nickel content in our Incoloy 825 Angle provides resistance to chloride – ion stress corrosion cracking, where carbide tools are recommended for turning with a continuous cut.
A variety of media corrosion of nuclear – burning dissolver show this Incoloy 825 C-Channel high integrated property, such as sulfuric acid, potassium hydroxide and nitric acid are all dealing in a same device.Our Incoloy 825 H-Beam is not necessary to preheat, but surfaces to be welded must be clean from paint, oil or crayon markings and any residual lubricants used in the forming process.
For maximum corrosion resistance in this Incoloy 825 I-Beam, hot worked parts should be stabilizing annealed before use.
The chromium and molybdenum content of our Incoloy 825 T-Beam provides resistance to chloride pitting, as well as resistance to a variety of oxidizing atmospheres.Incoloy 825 Angle | Incoloy 825 Angle | Incoloy 825 Angle | Incoloy 825 Angle | Incoloy 825 AngleThis Incoloy 825 Chain has good mechanical properties from cryogenic temperatures to moderately high temperatures.
The following properties are applicable to our Alloy 825 Angle at room and elevated temperatures in the annealed respectively stabilized temper and indicated size ranges.
Sachiya Steel International offers an extensive collection of Incoloy 825 Wire Mesh, which has good anti – oxidation and non – oxidizing heat acid performance.
Incoloy 825 Hexagonal Wire Mesh is an Austenitic Nickel – Iron – Chromium Alloy Developed for Exceptional Corrosion Resistance in Both Oxidizing and Reducing Environments.
Alloy 825 Welding Wire Mesh is used in chemical process equipment, acid production piping and vessels, pickling, etc.
Incoloy 825 Netting Wire Mesh is a nickel – iron – chromium alloy with titanium, molybdenum and copper, which has good mechanical properties from cryogenic temperatures to moderately high temperatures.Incoloy 825 Woven Wire Mesh has excellent resistance to both reducing and oxidizing acids, to stress – corrosion cracking, and to localized attack such as pitting and crevice corrosion.
Incoloy 825 Spring Steel Wire Mesh has useful resistance to boiling sulfuric acid up to 40 % concentration, to 60 % concentration at 176 Degree F and in all concentrations to 150 Degree F. Incoloy 825 Fencing Wire Mesh is even used as clad steel pipe – where resistance to stress cracking or general corrosion to a range of reducing or oxidizing acids is required.For long production runs if Alloy 825 Wires, the alloy tool steels, and high – speed steels give good results, especially if hard chromium plated to reduce galling.
Alloy 825 Hexagonal Wire Mesh is also used in ammonium sulfate vessels, marine exhaust systems, expansion bellows, power station ash hoppers, etc.
Sachiya Steel International is known Manufacture and Exporter of Incoloy 330 Angle And Incoloy Other Products , where heavy lubricants work best for drilling, tapping, boring or broaching.
Incoloy 330 Angle is hardened by heat treatment and cold working, which has a high level of corrosion resistance.
Our focus on the production of high quality Incoloy 330 C-Channel is at competitive pricing has allowed us to become an industry leader.
Incoloy 330 H-Beam is often used in valves, fasteners, tubing hangers, springs, mandrels, etc.
Incoloy 330 T-Beam can be age – hardened by adding aluminum and titanium.
Incoloy 330 Chain offers comparable corrosion resistance to its sister alloy Incoloy 825 Chain, but with the increased strength resulting from the age hardening process.Incoloy 330 Angle | Incoloy 330 Angle | Incoloy 330 Angle | Incoloy 330 Angle | Incoloy 330 Angle | Incoloy 330 Angle | Incoloy 330 Angle | Incoloy 330 Angle | Incoloy 330 Angle | Incoloy 330 Angle On the other hand, molybdenum and copper in Alloy 330 Angle are added to increase its resistance to corrosive media.
Sachiya Steel International offers a wide range of Incoloy 825 Threaded Forged Fittings, which has some excellent features such as cost effectiveness, rugged design, durable finish and more.
Incoloy 825 Forged Threaded Elbow (UNS N08825) is an austenitic nickel – iron – chromium – molybdenum – copper alloy containing high levels of chromium, molybdenum, nickel and copper to provide high levels of corrosion resistance to both moderately oxidizing and moderately reducing environments.
Incoloy 825 Forged Threaded Tee is used in chemical processing, nuclear fuel reprocessing, acid production, propeller shafts and oil and gas well piping.The hot – working range for Incoloy 825 Forged Threaded Cross is 1600 to 2150 Degree F, where most any commercial coolant may be used in the machining operations.
Meanwhile, these Incoloy 825 Forged Threaded Cap are also being offered in different sizes and shapes to our customers.
The molybdenum in Incoloy 825 Forged Threaded Fittings prevents resistance to pitting and crevice corrosion.Incoloy 825 Threaded Forged Fittings | Incoloy 825 Threaded Forged Fittings | Incoloy 825 Threaded Forged Fittings | Incoloy 825 Threaded Forged Fittings | Incoloy 825 Threaded Forged Fittings | Incoloy 825 Threaded Forged Fittings | Incoloy 825 Threaded Forged Fittings | Incoloy 825 Threaded Forged Fittings | Incoloy 825 Threaded Forged FittingsIncoloy 825 Forged Threaded Coupling is also used in chemical process equipment, propeller tubes, tank trucks; and spent nuclear fuel element recovery.
The high nickel content gives Incoloy 825 Forged Threaded Union exceptional resistance to general corrosion, pitting, crevice corrosion, inter – granular corrosion as well as stress corrosion cracking.
Sachiya Steel International offers a wide range of Incoloy Alloy 825 Tube to Female Pipes, where most of any commercial coolant may be used in the machining operations.
Incoloy 825 Tube Fittings has many different industrial applications, some of which include: Phosphoric acid evaporators, Propeller shafts, Tank trucks, and more.
Incoloy 825 Compression Fittings is an all – purpose project alloy, have good corrosion resistance of the acid and alkali metal property in both oxidation and reduction environments.Incoloy 825 Compression Tube Fittings has excellent resistance to sulfuric and phosphoric acids and resists inter – granular corrosion in the as – welded condition.
The commonly used welding methods work well with Incoloy 825 Female Connector Fittings, where matching alloy filler metal should be used.
Incoloy 825 Ferrule Fittings should not be used at temperatures where creep – rupture properties are design factors.
Incoloy 825 Double Ferrule Fittings is particularly useful in sulfuric & phosphoric acids, sulfur containing flue gases, sour gas, oil wells and sea water.Incoloy Alloy 825 Tube to Female Pipes | Incoloy Alloy 825 Tube to Female Pipes | Incoloy Alloy 825 Tube to Female Pipes | Incoloy Alloy 825 Tube to Female Pipes | Incoloy Alloy 825 Tube to Female Pipes | Incoloy Alloy 825 Tube to Female Pipes | Incoloy Alloy 825 Tube to Female Pipes | Incoloy Alloy 825 Tube to Female Pipes |Incoloy Alloy 825 Tube to Female Pipes | Incoloy Alloy 825 Tube to Female Pipes | Incoloy Alloy 825 Tube to Female PipesAlloy 825 Tube Fittings is developed to provide exceptional resistance to numerous corrosive environments, both oxidizing and reducing.
