Sachiya Steel International offers a wide range of Inconel 601 Wire, which develops a tightly adherent oxide scale which resists spalling even under severe thermal cycling. Other applications of our Inconel 601 Wires include thermocouple protection tubes, condenser tubes, process heaters, and so on. This Inconel 601 Wire is best forged, for large deformations, between 2250 Degree F and 1900 Degree F, but forging may be continued to 1650 Degree F. Due to high chromium and some aluminum content in our Inconel 601 Coil Wire, good resistance in oxidizing sulfur bearing atmospheres at elevated temperatures is demonstrated.
This Inconel 601 Electrode is often used in Chemical Processing, Heat treating industry, Aerospace, Power generation and so on. Our Inconel 601 Wire is a standard material of construction for various types of thermal – processing equipment. This Inconel 601 Wire has good creep rupture strength, along with readily joined by conventional welding products and processes. Our Alloy 601 Wire can be machined using conventional machining methods which are used for iron – based alloys.
This Alloy 601 Coil Wire is not suggested for use in strongly reducing and sulfur bearing environments. Our Alloy 601 Wire is a Nickel – Chromium alloy with an addition of Aluminum for outstanding resistance to oxidation and other forms of high temperature corrosion. This Alloy 601 Wire also has high mechanical properties at elevated temperatures.
|
Inconel 601 Wire Specifications
|
||
| Specifications | : | ASTM B166 ASME SB166 |
| Dimensions | : | ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360 |
| Length | : | 100 mm TO 6000 mm |
| Diameter | : | 10 mm To 100 mm |
| Specialize | : | Filler Wire, Coil Wire |
| Grade | C | Mn | Si | Cu | S | Cr | Fe | Ni | N |
| Inconel 601 | 0.10 max | 1.00 max | 0.50 max | 1.00 max | 0.015max | 21.00 – 25.00 | bal | 58.0-63.0 | – |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.1 g/cm3 | 1411 °C (2571 °F) | Psi – 80,000 , MPa – 550 | Psi – 30,000 , MPa – 205 | 30 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 601 | 2.4851 | N06601 | NCF 601 | NA 49 | XH60BT | NC23FeA | NiCr23Fe |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International offers a wide range of Inconel 601 Angle And Inconel Other Products, which resists oxidation and spalling at temperatures as high as 1260 Degree C. Our Inconel 601 Angle is a nickel – chromium alloy that is highly resistant to oxidation in the course of 2200 Degree F. This Inconel 601 C-Channel is used for chemical and process industries in catalyst grid supports in equipment for nitric acid production, Condenser tubes in sour – water, Insulating cans in ammonia reformers, Combustor components, Strippers, Process heaters and so on.Our Inconel 601 H-Beam is widely used in aerospace, thermal processing, power production, chemical treatment and land base gas turbine engines.
The welding method and filler metals used in this Inconel 601 I-Beam will be dependent upon the service conditions to which the final fabricated part will be subjected.
Our Inconel 601 T-Beam is also used for jet – engine igniters and for combustion – can liners, diffuser assembles, and containment rings in gas turbines for aircraft, vehicular and industrial applications.This Inconel 601 Chain has outstanding thermal and electrical properties as well as its ease of use.
Our Alloy 601 Angle as well has outstanding oxidation resistance to 2200 Degree F, and is forged at 1038 Degree C to 1233 Degree C (1900 Degree F to 2250 Degree F).
These Nickel – chromium – iron Alloy 601 C-Channel is a general purpose engineering material for applications that require resistance to heat and corrosion.
Inconel 601 Angle, Channel, Beam, Chain SpecificationsSpecifications:ASTM B166 / ASME B166Dimensions:EN, DIN, JIS, ASTM, BS, ASME, AISIInconel 601 Angle:5mm to 9mmInconel 601 Channel:40mm*20mm~300mm*300mmInconel 601 Beam:3″ thru 12.31″Inconel 601 Chain:1/8 inch – 1/2 inch DiameterThickness:3.0mm – 120mmLength:3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut SizesType:Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain 601 Inconel Angle, Channel, Beam, Chain Chemical CompositionGradeCMnSiCrSFeMoNiCuInconel 6010.10 max1 max0.50 max21.0–25.00.15 maxbalance 58.0-63.00.50 maxInconel 601 Angle, Channel, Beam, Chain Mechanical PropertiesDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation8.41 g/cm31411 °C (2571 °F)Psi – 80,000 , MPa – 550Psi – 30,000 , MPa – 20530%Equivalent Grades for 601 Inconel Angle, Channel, Beam, ChainSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENInconel 6012.4851N06601NCF 601NA 49XH60BTNC23FeANiCr23Fe Inconel 601 Angle, Channel, Beam, Chain Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProceInconelingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryFor more details:E-Mail: sales@sachiyasteel.comWeb: https://steeltube.co.in/Phone: +91 9769056007
Sachiya Steel International offers a wide range of Inconel 601 Threaded Forged Fittings, which are extensively demanded in residential, commercial and industrial sectors.
These Inconel 601 Forged Threaded Elbow (UNS N06601) are used in gas-turbine components and others.
Inconel 601 Forged Threaded Tee Fittings is perfect for applications that demand resistance to heat and corrosion.
Heavy lubricants in these Inconel 601 Forged Threaded Cross are used for tapping, drilling, boring, or broaching.
Inconel 601 Forged Threaded Cap is not suggested for use in strongly reducing, sulfur bearing environments.These Inconel 601 Forged Threaded Fittings has highly resistant to oxidation through 2200 Degree F. Inconel 601 Forged Threaded Coupling has high mechanical strength, and is readily formed, machined, and welded.
These Inconel 601 Forged Threaded Bushing was designed to withstand high temperature exposure and severe corrosive conditions.
Sachiya Steel International offers a wide range of Inconel 601 Threaded Forged Fittings, which are extensively demanded in residential, commercial and industrial sectors.
These Inconel 601 Forged Threaded Elbow (UNS N06601) are used in gas-turbine components and others.
Inconel 601 Forged Threaded Tee Fittings is perfect for applications that demand resistance to heat and corrosion.
Heavy lubricants in these Inconel 601 Forged Threaded Cross are used for tapping, drilling, boring, or broaching.
Inconel 601 Forged Threaded Cap is not suggested for use in strongly reducing, sulfur bearing environments.
These Inconel 601 Forged Threaded Fittings has highly resistant to oxidation through 2200 Degree F.Inconel 601 Forged Threaded Coupling has high mechanical strength, and is readily formed, machined, and welded.
Sachiya Steel International offers a wide range of Inconel 600 Wire, which are normally preferred for handling concentrated and high temperature caustic.
Its high nickel content, a minimum of Ni 72 %, combined with its chromium content, provides users of Inconel 600 Wire a number of benefits.
In strong oxidizing solutions like hot, concentrated nitric acid, Inconel 600 Coil Wires has poor resistance.
The high chromium content of Inconel 600 Wire raises its oxidation resistance considerably above that of pure nickel, while its high nickel content provides good corrosion resistance under reducing conditions.Inconel 600 Wire can both hot formed and cold form using typical processes, and is also often used in vegetable and fatty acid vessels.
Inconel 600 Wires is also used for furnace components, in food and chemical processing, nuclear engineering, and sparking electrodes.
Chromium content in Alloy 600 Coiled Wire confers resistance to sulfur compounds and also provides resistance to oxidizing conditions at high temperatures or in corrosive solutions.The high nickel content in Alloy 600 Coil Wire enables it to retain considerable resistance under reducing conditions.
Sachiya Steel International offers a wide range of Inconel Alloy 601 Tube to Female Pipes, where oxidation resistance is further enhanced by the aluminum content.
Inconel 601 Tube Fittings is used in several industries such as Thermal Processing, Power Generation, Aerospace and Chemical Processing.
Tubing in these Inconel 601 Compression Fittings has been used in ceramic tile production in the latest designs of roller hearth ovens as the material resists the high temperature firing cycle and the corrosive effects of the glazes and stucco applied to the tiles.Inconel 601 Female Connector Fittings is often used in Radiant tubes, Steam super – heater tube supports, Muffles and retorts, Strand annealing tubes, etc.
These Inconel 601 Ferrule Fittings has good strength, toughness and ductility, and can be used at cryogenic temperatures.
All standard machining operations may be performed on Inconel 601 Double Ferrule Fittings, where best machinability is obtained in the solution – treated condition.Inconel Alloy 601 Tube to Female Pipes | Inconel Alloy 601 Tube to Female Pipes | Inconel Alloy 601 Tube to Female Pipes | Inconel Alloy 601 Tube to Female Pipes | Inconel Alloy 601 Tube to Female Pipes | Inconel Alloy 601 Tube to Female Pipes | Inconel Alloy 601 Tube to Female Pipes | Inconel Alloy 601 Tube to Female Pipes | Inconel Alloy 601 Tube to Female PipesIn pollution – control applications, these Inconel 601 Compression Tube Fittings is used for thermal reactors in exhaust systems of gasoline engines and for combustion chambers in solid – waste incinerators.
Alloy 601 Tube Fittings is also used in tube supports grid barriers, and ash – handling systems for power generation equipment.
