Sachiya Steel International is a Leading Manufacture And Exporter of Titanium Gr 5 Wire, which is alloyed with 6 % Aluminum and 4 % Vanadium. Features of Titanium Grade 5 Wire and its applications are used in in different fields, from motor sport to aerospace, naval and industrial. In the majority of these and other engineering applications, Titanium Grade 5 Coil Wire has replaced heavier, less serviceable or less cost effective materials. Titanium Grade 5 Wire is the common high strength, light weight alloy used for different applications.
Like most titanium alloys, Titanium Grade 5 Electrode has outstanding resistance to corrosion in most natural and many industrial process environments. Grade 5 Titanium Wire is alloyed with aluminum, manganese, iron, molybdenum and other metals to increase strength, to withstand high temperatures, and to lighten the resultant alloy. Grade 5 Titanium Coil Wire is often used in pressure vessels; rocket engine cases; helicopter rotor hubs; fasteners; critical forgings requiring high strength-to-weight ratios.
Grade 5 Titanium Welding Wire is an aerospace alloy that will have ultimate tensile strength at and above 120,000 psi, where it further accounts for 50 percent of total titanium usage the world over. The high cost of Grade 5 Titanium limit their use to military applications, aircraft, spacecraft, medical devices, highly stressed components such as connecting rods on expensive sports cars and some premium sports equipment and consumer electronics.
|
Titanium Gr.5 Wire Specifications
|
||
| Specifications | : | ASTM B863 ASME SB863 |
| Dimensions | : | ANSI/AWCI – 01 -1992 and ASTM E 2016-11 and RRW 360 |
| Length | : | 100 mm TO 6000 mm |
| Diameter | : | 10 mm To 100 mm |
| Specialize | : | Filler Wire, Coil Wire, Electrode Wire, Welding Wire. |
| Grade | Ti | C | Fe | Al | V | O |
| Titanium Grade 5 | 90 min | – | 0.25 max | 6 min | 4 min | 0.02 max |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 4.43 g/cm3 | 1632 °C (2970 °F) | Psi – 138000 , MPa – 950 | Psi – 128000 , MPa – 880 | 14 % |
| STANDARD | WERKSTOFF NR. | UNS |
| Titanium Grade 5 | 3.7165 | R50400 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International offers an enormous variety of Titanium Gr 5 Plates ,Sheets and Coils, where we provide these products in a number of dimensions and sizes for to cater the varied necessities of customers.
Our Titanium Grade 5 Coils is castable and is used “as cast” in sporting goods.These Titanium Grade 5 Slating Coils provides an outstanding grouping of high toughness and strength.
Titanium Grade 5 Perforated Coils has excellent tensile properties at ambient temp and a worthwhile creep resistance for up to 570 Deg F. Meanwhile, these Grade 5 Titanium Plates are also being offered in different sizes and shapes to our customers.Titanium Gr 5 Plates | Titanium Gr 5 Plates | Titanium Gr 5 Plates | Titanium Gr 5 Plates | Titanium Gr 5 Plates | Titanium Gr 5 Plates | Titanium Gr 5 Plates | Titanium Gr 5 Plates| Titanium Gr 5 Plates \ Titanium Gr 5 Plates | Titanium Gr 5 Plates | Titanium Gr 5 Plates | Titanium Gr 5 PlatesCommercially Pure (CP), Grade 5 Titanium Coils, in its annealed state, is a ductile metal.
Resistance to fatigue and crack propagation is excellent of these Grade 5 Titanium Slatting Coils.
5 Sheets has a density of 4.51 g/cc – less than 60 % that of steel.
5 Plates should be emphasized that fabrication operations (annealing, descaling) can increase the impurity level unless particular care is taken.
Sachiya Steel International is a Leading manufacturer and exporter of Titanium Gr 2 Wire, which has a detrimental effect on ductility and its content kept as low as possible.
In the majority of these and other engineering applications, Titanium Grade 2 Wire has replaced heavier, less serviceable or less cost effective materials.
Titanium Grade 2 Coil Wire is the best among commercially pure titanium grades, where it is the softest and most ductile compared to grades.
Typical applications for Titanium Grade 2 Wire include chemical process, petroleum refining, biomedical as well as heat exchangers in an array of different applications.Titanium Grade 2 are light in weight, have extraordinary corrosion resistance and the ability to withstand extreme temperatures.
2 Filler Wire is higher in strength than CP Grade 1, but lower in strength than CP Grade 3 and CP Grade 4.
2 Electrode is used in aviation, aerospace, military, chemical, petrochemical industry, in the medical field, jewelry, calibration of measurement instruments, piercing purposes.Ti Gr.
Sachiya Steel International is a known manufacturer and exporter of Titanium Gr 2 Wire Mesh, which are unalloyed Commercially Pure (CP) Titanium.
Our Titanium Grade 2 Hexagonal Wire Mesh is used based on the corrosion resistance, ductility and strength requirements of the specific application.
Titanium Grade 2 Welding Wire Mesh is called the “workhorse” of the commercially pure titanium industry, thanks to its varied usability and wide availability.
Although “commercially pure”, Titanium Grade 2 Spring Steel Wire Mesh has acceptable mechanical properties and has been used for orthopedic and dental implants.
For most applications, Titanium Grade 2 Fencing Wire Mesh is alloyed with small amounts of aluminum and vanadium, typically 6 % and 4 % respectively, by weight.Ti Alloy Gr.
2 Hexagonal Wire Mesh can easily be cold rolled, but cold drawing is very difficult because of frequent seizing on the die.
Sachiya Steel International is a known manufacturer and exporter of Titanium Gr 5 Tube to Female Pipes , which has improved ductility and fracture toughness with some reduction in mechanical strength.
Titanium Grade 5 Tube Fittings and its related alloys resist a wide range of acid conditions being highly resistant to oxidizing acids, possessing useful resistance to reducing acids and offering good resistance to most organic acids at lower concentrations and temperatures.
Hot Isotactic Pressure of Titanium Grade 5 Compression Fittings applied in an inert atmosphere (argon) to eliminate micro – porosity and shortage of material inside the casting.Titanium Grade 5 Female Connector Fittings is an alloyed titanium product containing 6 % Aluminum and 4 % Vanadium; is a medium strength product.
The usability makes Titanium Grade 5 Ferrule Fittings the best alloy for use in several industries, like the aerospace, medical, marine and chemical processing industries.
Besides alpha – phase stabilizers, Titanium Grade 5 Double Ferrule Fittings are alloyed with 1 % – 2 % of beta phase stabilizers such as molybdenum, silicon or vanadium.Ti Gr.
5 Tube Fittings are the smallest group of titanium alloys and have good hardenability and can be heat treated to high yield strengths.
Sachiya Steel International is a prominent manufacturer, trader and supplier of a vast collection of Titanium Gr 2 Round Bar.
Titanium Grade 2 Square Bars is the most generally used and extensively obtainable grade of unalloyed titanium.
These Titanium Grade 2 Flat Bars is characteristically used in applications that need higher corrosion resistance in different hostile media.Titanium Grade 2 Threaded Bars as well offers superior strength and formability between grades 1 and 3.
Titanium Grade 2 Hollow Bars provides soaring corrosion resistance and a better operational array than aluminum.
By means of outstanding corrosion resistance, formability and moderate strength, Titanium Grade 2 Hexagonal Bars signifies the most extensively used form of titanium.Titanium Gr 2 Round Bar | Titanium Gr 2 Round Bar | Titanium Gr 2 Round Bar | Titanium Gr 2 Round Bar | Titanium Gr 2 Round Bar| Titanium Gr 2 Round Bar | Titanium Gr 2 Round BarMeanwhile, Titanium Grade 2 Triangular Bars are also being offered in different sizes and shapes to our customers.
Titanium Grade 2 Bars has a minimum yield strength of 275 Mpa (40 ksi), and relatively low levels of impurity elements, which places it between Grades 1 and 3 in terms of strength.This is partly due to low density and corrosion resistance of Titanium Grade 2 Rods which can be easily welded, hot and cold worked and machined.
