Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 329 Round Bar , which is an age hardening nickel base super – alloy with exceptional strength from room temperature through about 1600 Degree F. Limit currents and the size of the fusion zone, where rapid cooling in Stainless Steel 329 Square Bars from welding is necessary to minimize aging stresses. After welding, the fabrication of Stainless Steel 329 Flat Bars should be solution treated, using rapid heating and cooling rates through the aging range. GTAW using DC straight polarity in Stainless Steel 329 Threaded Bars requires good joint fit – up and cooling by means of copper backup bars or water – cooled fixtures.
After welding, the assembly of Stainless Steel 329 Hollow Bars should be solution treated using rapid heating and cooling rates through the 1200 Degree F – 1600 Degree F range, followed by aging. Stainless Steel 329 Hexagonal Bars can even be a substitute of Austenitic grade of marine surrounding, where we offer tailor made these with suitable wedge options.
Stainless Steel 329 Round Bar | Stainless Steel 329 Round Bar | Stainless Steel 329 Round Bar | Stainless Steel 329 Round Bar | Stainless Steel 329 Round Bar | Stainless Steel 329 Round Bar | Stainless Steel 329 Round Bar | Stainless Steel 329 Round Bar | Stainless Steel 329 Round Bar | Stainless Steel 329 Round Bar
Stainless Steel 329 Triangular Bars doesn’t losses it shape when exhibit to a temperature of liquid nitrogen which is also high appreciable and has a great commercial demand. High strength condition: Solution treatment of Stainless Steel 329 Bars is up to 60 Degree F – 100 Degree F below the beta (typically 1460 Degree F – 1480 Degree F), not less than 30 minutes, and then water quench.
SS 329 Round Bar Specifications |
||
| Specifications | : | ASTM A276, ASME SA276 / ASTM A479 ASME SA479 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| SS 329 Round Bars |
: | Outside Diameter in the range of 4mm to 500mm |
| SS 329 Bright Bars |
: | Outside Diameter in the range of 4mm to 100mm |
| SS 329 Hex Bars | : | 18mm – 57mm (11/16″ to 2-3/4″) |
| SS 329 Square Bars |
: | 18mm – 47mm (11/16″ to 1-3/4″) |
| SS 329 Flat Bars |
: | 1/2” to 10” in thickness range of 2mm to 150mm, |
| Finish | : | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Length | : | 1 to 6 Meters, Custom Cut Lengths |
| Form | : | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
329 Stainless Steel Round Bar Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 329 | 0.08 max | 1 max | 0.75 max | 0.40 max | 0.30 min | 23.0-28.0 | 1.0-2.0 | 2.5-5.0 | – |
Stainless Steel 329 Rods Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 0.285 lb/in3 | – | MPA-725 | MPA-550 | 25 % |
Equivalent Grades for 329 Stainless Steel Round Bar
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 329 | 1.4460- | S32900 | SUS 329 | 329S31 | – | – | – |
SS 329 Round Bar Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Email: sales@sachiyasteel.com
For More Information Visit Our Website : Steel Pipe Factory
