
Sachiya Steel International is one of the Leading Manufacturer And Exporter Of High-Quality Monel Alloy K500 Beam And Other Monel Alloy Products, which combine excellent corrosion resistance with elevated mechanical properties and relatively easy fabrication. Applications of Monel K500 Angle are limited to a maximum temperature of 1000 Degree F per ASME. Monel K500 C-Channel is often chosen to solve SCC problems, which may occur with 316L stainless. Monel K500 H-Beam was designed for maximum resistance to acid attack and demonstrates superior resistance to stress – corrosion cracking in boiling sulphuric acid. Monel K500 I-Beam also has excellent general corrosion resistance to sulphuric acid and to chloride stress corrosion cracking.


Sachiya Steel International is one of the Leading Manufacturer And Exporter of Monel Alloy K500 Round Bars, where we offer these products to our well – regarded clienteles in a number of designs.
Monel K500 Square Bars combines the outstanding corrosion resistance attribute of Monel 400 Bars by means of the additional benefits of greater hardness and strength.
Monel K500 Flat Bars is a nickel – copper precipitation – harden able alloy that syndicates corrosion resistance, non – magnetic and high strength properties.
Monel K500 Threaded Bars is generally used in doctor blades, scrapers and pump components, cable wrap and oil well drill collars, marine instruments, springs, valve tray, submarine parts and electronic components.Monel K500 Hollow Bars (UNS N05500) is effectively nonmagnetic, even at relatively low temperatures.
Meanwhile, these Monel K500 Hexagonal Bars are also being offered in different sizes and shapes to our customers.
The possession of this resistance to both general and localized corrosion under diverse conditions is what allows Monel K500 Triangular Bars to have a broad usefulness and wide range of applications.



Sachiya Steel International is one of the leading manufacturer and exporter of Monel Alloy K500 Threaded Forged Fittings, where our expert professionals make use of excellent quality material in the production process.
Typical applications for our Monel K500 Forged Threaded Elbow (UNS N05500) are pump shafts and impellers; doctor blades and scrapers; oil – well drill collars and instruments; electronic components; springs; and valve trim.
These Monel K500 Forged Threaded Tee is a nickel – copper alloy, precipitation harden able through additions of aluminum and titanium.Our Monel K500 Forged Threaded Cross has approximately three times the yield strength and double the tensile strength when compared with Monel 400 Forged Threaded Cross Fittings.
These Monel K500 Forged Threaded Cap also has excellent corrosion resistance together with increased strength and hardness of that of Alloy 400.
Meanwhile, our Monel K500 Forged Threaded Fittings are also being offered in different sizes and shapes to our customers.
These Monel K500 Forged Threaded Coupling can be readily joined and fabricated, which further has excellent mechanical properties at subzero temperatures.Monel Alloy K500 Threaded Forged Fittings | Monel Alloy K500 Threaded Forged Fittings | Monel Alloy K500 Threaded Forged Fittings | Monel Alloy K500 Threaded Forged Fittings | Monel Alloy K500 Threaded Forged Fittings | Monel Alloy K500 Threaded Forged Fittings | Monel Alloy K500 Threaded Forged Fittings | Monel Alloy K500 Threaded Forged Fittings | Monel Alloy K500 Threaded Forged FittingsBy proper control of the amount of hot or cold work and by the selection of appropriate thermal treatments, finished fabrications in our Monel K500 Forged Threaded Union can be produced to a rather wide range of mechanical properties.

Sachiya Steel International is one of the well-known Manufacture and Exporter of quality Monel Alloy K500 Angle And Other Monel Products , which combines excellent corrosion resistance with elevated mechanical properties and relatively easy fabrication.
Applications of Monel K500 Angle are limited to a maximum temperature of 1000 Degree F per ASME.
Monel K500 C-Channel is often chosen to solve SCC problems, which may occur with 316L stainless.
Monel K500 H-Beam was designed for maximum resistance to acid attack and demonstrates superior resistance to stress – corrosion cracking in boiling sulphuric acid.
Monel K500 I-Beam also has excellent general corrosion resistance to sulphuric acid and to chloride stress corrosion cracking.Monel K500 T-Beam can be used for a wide variety of applications including: control valves, pressure relief valves, and centrifugal pumps.
Alloy K500 Angle has minimal carbide precipitation during welding and excellent mechanical properties and fabricability is excellent design features.
