Sachiya Steel International is one of the leading Manufacturer and Exporter of Monel K500 Tube to Male Fittings, which are mass – produced under the management of our knowledgeable specialists. The finest machinability for this Monel K500 Tube Fittings is in the annealed form. The corrosion resistance of Monel K500 Compression Fittings is considerably corresponding to that of alloy K500, apart from that, when in the age – hard-bitten form, it has a superior propensity to SCC in some atmospheres. Monel K500 Male Connector Fittings is generally used in Chemical Process Industry: such as in procedures connecting organic acids, dry chlorine and caustic soda, manufacture of chlorinated plastics, and so on.
Monel K500 Ferrule Fittings (UNS N05500) has resistant to a sour – gas atmosphere. Meanwhile, these Monel K500 Double Ferrule Fittings are also being offered in different sizes and shapes to our customers. The high chromium content gives Alloy K500 Tube Fittings excellent resistance to aqueous corrosion by oxidizing acids (especially nitric acid) and salts and to suffixation at high – temperatures. Alloy K500 Compression Fittings has a superior stress cracking resistance than Monel K500 in steam generation nuclear reactors for piping, separators and weldments.
The properties of Alloy K500 Male Connector Fittings are useful for various applications involving nitric or nitric / hydrofluoric acid solutions. These impact strengths (averages from several tests) in Alloy K500 Ferrule Fittings were generated using notch samples, which are machined from plates.
|
Monel K500 Tube to Male Fittings Specifications
|
||
| Specifications | : | ASTM B366 ASME SB366 |
| Tube Size | : | 6mm to 38mm to 1/4″ to 1 1/2″ |
| Thread |
: | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Brass | : | ASTM B16 ASTM B 453 |
| Pressure Rating | : | 6000PSI for Monel, 300/1000/3000PSI for Brass |
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Monel K500 | 0.25 max | 1.5 max | 0.5 max | 0.010 max | 27.00 – 33.00 | 0.5 – 2 | 63.00 min |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Monel K500 | 8.44 g/cm3 | 1350 °C (2460 °F) | Psi – 160000 , MPa – 1100 | Psi – 115000 , MPa – 790 | 20 % |
| STANDARD | WERKSTOFF NR. | UNS |
| Monel K500 | 2.4375 | N05500 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Email: sales@sachiyasteel.com
For More Information Visit Our Website : Sachiya Steel International
Sachiya Steel International is one of the leading manufacturer and exporter of Monel K500 Tube to Male Fittings, which are mass – produced under the management of our knowledgeable specialists.
The finest machinability for this Monel K500 Tube Fittings is in the annealed form.
The corrosion resistance of Monel K500 Compression Fittings is considerably corresponding to that of alloy K500, apart from that, when in the age – hard-bitten form, it has a superior propensity to SCC in some atmospheres.
Monel K500 Male Connector Fittings is generally used in Chemical Process Industry: such as in procedures connecting organic acids, dry chlorine and caustic soda, manufacture of chlorinated plastics, and so on.Monel K500 Ferrule Fittings (UNS N05500) has resistant to a sour – gas atmosphere.
Meanwhile, these Monel K500 Double Ferrule Fittings are also being offered in different sizes and shapes to our customers.
The high chromium content gives Alloy K500 Tube Fittings excellent resistance to aqueous corrosion by oxidizing acids (especially nitric acid) and salts and to suffixation at high – temperatures.Monel K500 Tube to Male Fittings | Monel K500 Tube to Male Fittings | Monel K500 Tube to Male Fittings | Monel K500 Tube to Male Fittings | Monel K500 Tube to Male Fittings | Monel K500 Tube to Male Fittings |Monel K500 Tube to Male Fittings | Monel K500 Tube to Male FittingsAlloy K500 Compression Fittings has a superior stress cracking resistance than Monel K500 in steam generation nuclear reactors for piping, separators and weldments.
Sachiya Steel International is one of the prominent Manufacture and Exporter of Monel Alloy K500 Tube to Female Pipes, where we are catering our services to many Industries.
Monel K500 Tube Fittings has excellent general corrosion resistance to sulphuric acid and to chloride stress corrosion cracking.
Resistance to sulphuric acid is particularly exceptional but Monel K500 Compression Fittings shows useful resistance in phosphoric acid, nitric acid as well as in chloride environments.Monel K500 Female Connector Fittings has excellent resistance to general corrosion, pitting, and crevice corrosion in chemicals containing chlorides and sulphuric, phosphoric, and nitric acids.
Monel K500 Ferrule Tube Fittings also contains niobium for stabilization against sensitization and resultants inter – granular corrosion.
At 33 % nickel, Monel K500 Double Ferrule Tube Fittings has practical immunity to chloride stress corrosion cracking.
Monel K500 Compression Tube Fittings is often chosen to solve SCC problems, which may occur with 316L stainless.Alloy K500 Female Connector Fittings can be used for a wide variety of applications including: control valves, pressure relief valves, and centrifugal pumps.
Sachiya Steel International is one of the leading Manufacturer and Exporter of Monel Alloy K500 Tube to Union Fittings.
When in the age – hardened condition, Monel K500 Compression Fittings (UNS N05500) has a greater tendency toward stress – corrosion cracking in some environments than Monel 400 Compression Fittings.
A thoroughly modern alloy, Monel K500 Ferrule Fittings, is a high performance alloy that benefits greatly from double melting through the Electro Slag Refining (ESR) process, which ensures the cleanest and highest quality of material is supplied.
Monel K500 Union Fittings is used for sea water pump shafts and impellers as well as being used in the oil well industry for valve trim and other components.Meanwhile, these Monel K500 Tube Fittings are also being offered in different sizes and shapes to our customers.
The resistance of Alloy K500 Tube Fittings in Nitric acid plus hydrofluoric acid mixtures lends itself to pickle shop duties.
The substantial chromium content gives Alloy K500 Compression Fittings outstanding resistance to oxidizing chemicals and to high – temperature oxidizing gases.Monel Alloy K500 Tube to Union Fittings | Monel Alloy K500 Tube to Union Fittings | Monel Alloy K500 Tube to Union Fittings | Monel Alloy K500 Tube to Union Fittings | Monel Alloy K500 Tube to Union Fittings | Monel Alloy K500 Tube to Union Fittings | Monel Alloy K500 Tube to Union Fittings | Monel Alloy K500 Tube to Union Fittings | Monel Alloy K500 Tube to Union Fittings | Monel Alloy K500 Tube to Union FittingsAlloy K500 Union Tube Fittings is a basic nickel – chromium alloy for corrosive and / or high temperature applications.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Monel 400 Tube to Male Fittings, where these products is being provided by us is factory – made using superior quality of metal.
Our Monel 400 Tube Fittings are characterized by their resistance to attack by alkalis and acids, in addition to their superior mechanical potency and excellent ductility.
Welding techniques comprising metal – arc welding, gas – arc welding, submerged – arc welding and gas – metal – arc welding are suggested on these Monel 400 Compression Fittings.
Heavy duty machining tooling and equipment must be used in our Monel 400 Male Connector Fittings to lessen down chatter or work – toughening of the alloy onward of the cutting.These Monel 400 Ferrule Fittings (UNS N04400) is a rock – solid solution alloy which can merely be hardboiled by cold functioning.
Meanwhile, our Monel 400 Double Ferrule Fittings are also being offered in different sizes and shapes to our customers.
These Alloy 400 Male Connector Fittings has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000 Degree F, and its melting point is 2370 Degree F – 2460 Degree F.The presence of our Monel 400 Compression Tube Fittings can lead to galvanic corrosion.
