Kalpataru Piping is a leading manufacturer and exporter of Stainless Steel 304L Tube to Male Fittings, which is tougher than grade 304 stainless steel and has a long stringy chip, but chip breakers should be used. Low rates and steady feeds are required while machining our Stainless Steel 304L Tube Fittings to reduce work hardening. Most common fusion and resistance welding procedures can be used to weld these Stainless Steel 304L Compression Fittings.
Where filler metal is required, oxyacetylene welding for our Stainless Steel 304L Compression Tube Fittings should be avoided. These Stainless Steel 304L Male Connector Tube Fittings can be heated to 1149° C – 1260° C (2100° C – 2300° F) in conventional hot working methods; however, they should not be heated below 927° C. (1700 Degree F).
A post-work annealing of our SS 304L Tube Fittings is recommended to improve corrosion resistance. These SS 304L Male Run Tees can be sheared, stamped, headed, and drawn, and post-work annealing is advised to minimise internal strains. Our SS 304L Male Connector Fittings are annealed at temperatures ranging from 1010 to 1121 degrees Celsius (1850 to 2050 degrees Fahrenheit), with quick cooling in between. Heat treatment is not required for these Stainless Steel 304L Male Elbow NPT, which has higher creep and stress rupture qualities than Alloy 304.
Stainless Steel 304L Tube To Male Fittings Test Certificates
We provide Manufacturer TC (Test Certificate) in compliance with EN 10204/3.1B, Raw Materials Certificate, 100% Radiography Test Report, and Third Party Inspection Report at Kalpataru Piping. We also offer standard certificates, such as EN 10204 3.1, as well as special requirements, such as. MR 01075, NACE. If clients request it, FERRIT CONTENT will be provided in accordance with industry standards.
• EN 10204/3.1B,
• Raw Materials Certificate
• 100% Radiography Test Report
• Third Party Inspection Report, etc.
Sachiya Steel International is one of the Leading Manufacture And Exporter of Stainless Steel 304L Tube to Male Fittings, which is tougher than grade 304 stainless steel with a long stringy chip however, using chip breakers is recommended.
Machining of our Stainless Steel 304L Tube Fittings requires low speeds and constant feeds to reduce its tendency to work harden.
Welding of these Stainless Steel 304L Compression Fittings can be performed using most of the conventional fusion and resistance methods.Oxyacetylene welding for our Stainless Steel 304L Compression Tube Fittings should be avoided, where filler metal is recommended.
Conventional hot working processes can be performed, where these Stainless Steel 304L Male Connector Tube Fittings should be heated to 1149 Degree C – 1260 Degree C (2100 Degree C – 2300 Degree F); however, it should not be heated below 927 Degree C (1700 Degree F).To optimize corrosion resistance, a post – work annealing of our SS 304L Tube Fittings is recommended.
Shearing, stamping, heading and drawing are possible with these SS 304L Male Run Tee, and post – work annealing is recommended to eliminate internal stresses.
Annealing of our SS 304L Male Connector Fittings is performed at 1010 Degree C – 1121 Degree C (1850 Degree F – 2050 Degree F), which should be followed by rapid cooling.
Sachiya Steel International is Leading Manufacturer And Exporter of Copper Tube to Male Fittings, which is available in different shapes, sizes and designs as per requirements given by the clients.
These Copper Tube Fittings is a chemical element in the carbon group, where it is a soft and malleable metal and is regarded as both heavy metal and poor metal.
Our firm specializes in trading and supplying a quality array of Copper Compression Tube to Male Fittings, which is offered at market leading prices.
We are one of the distinguished organizations that are engaged in manufacturing, supplying and exporting a qualitative gamut of these Copper Male Connector Fittings, which are available in different sizes and shapes for our clients.With the help of our procurement agents, we have been able to trade and supply a comprehensive assortment of our Copper Ferrule Tube to Male Fittings, which are available in customized sizes and shapes for our patrons.
These Copper Double Ferrule Tube to Male Fittings is designed by the skilled professionals with the help of progressive technology and using quality approved components as per the set industry standards.Copper Tube to Male Fittings | Copper Tube to Male Fittings | Copper Tube to Male Fittings | Copper Tube to Male Fittings | Copper Tube to Male Fittings | Copper Tube to Male Fittings | Copper Tube to Male Fittings | Copper Tube to Male Fittings | Copper Tube to Male Fittings | Copper Tube to Male Fittings | Copper Tube to Male FittingsNew technologies like laser welding are used to manufacture our advanced Copper Compression Tube Fittings as they are of superior quality and more.
Our company has achieved a milestone in offering these Copper Male Connector Tube Fittings to the clients, which are extruded, cold drawn & annealedCopper Tube to Male Pipes Fittings SpecificationsSpecifications:ASTM B280 ASME SB280 / ASTM B68 ASME SB68Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Copper, 300/1000/3000PSICopper Tube to Male Pipes Fitting Chemical CompositionStandardCopper NO.Chemical CompositionMechanical PropertiesCU%P%TemperTensile strength (Mpa)Elongation (%)Average Grain Size (mm)ASTMB280/68C12200>99.90.015 to 0.040>60>205>40>0.040>50>245Copper Tube to Male Pipes Fittings Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Nickel 200 Tube to Male Fittings, which has some outstanding quality of attributes such as durable, fine finish, dimensionally constant, and so on.
These Nickel 200 Tube Fittings (UNS N02200) has a low annealed rigidity and very low work – toughening rate that is needed for cold establishing processes such as spinning, coining, deep drawing, and so on.
For the reason that the alloy shows excellent corrosion resistance, our Nickel 200 Compression Fittings has been used in caustic solution, food handling machinery, all – purpose corrosion – resistant components and constructions.These Nickel 200 Male Connector Fittings provide corrosion resistance in neutral and reducing media along with in oxidizing environments offered that the oxidizing media permits the establishment of an unreceptive oxide film.
Meanwhile, our Nickel 200 Compression Tube Fittings are as well being offered in different sizes and shapes to our customers.
These Nickel 200 Ferrule Fittings has a relatively low work – hardening rate, but it can be cold worked to moderately high strength levels while maintaining ductility.Sachiya Steel International is one of the pioneer stockiest and trader of our quality Nickel 200 Double Ferrule Fittings, which are often required in complex applications, where corrosion and thermal resistance are demanded.
These Alloy 200 Male Connector Fittings are nickel and chromium alloys, as well as nickel and molybdenum alloys with high – temperature resistant properties.Nickel 200 Tube to Male Fittings SpecificationsSpecifications:ASTM B366 ASME SB366Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Nickel, 300/1000/3000PSI for Brass Nickel Alloy 200 Tube To Male Fittings Chemical Composition GradeCMnSiSCuFeNiNickel 2000.15 max0.35 max0.35 max0.01 max0.25 max0.40 max99.0 min Nickel 200 Tube To Male Fittings Mechanical PropertiesElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)ElongationNickel 2008.9 g/cm31446 °C (2635 °F)Psi – 67000 , MPa – 462Psi – 21500 , MPa – 14845 % Equivalent Grades for 200 Nickel Ferrule Fitting Tube To Male FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENNickel 2002.4066N02200NW 2200NA 11НП-2N-100MNi 99.2 Alloy 200 Tube To Male Fittings Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry About Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
