Sachiya Steel International is one of the Leading Manufacturer And Exporter of Inconel 718 Round Bars, where the age – hardened condition gives better chip action on chip breaker tools and produces a better finish. Inconel 718 Square Bars accounts for up to 50 % of the weight of aircraft turbojet engines, being the main component for discs, blades and casing of the high pressure section of the compressor and discs as well as some blades of the turbine section. The precipitation of this nickel – (aluminum, titanium, and niobium) phases in Inconel 718 Flat Bars is induced by heat treating in the temperature range of 1100 Degree F to 1500 Degree F.
This is the preferred treatment in tensile – limited applications for Inconel 718 Threaded Bars as it produces the best transverse ductility in heavy sections, impact strength and low temperature notch tensile strength. Common Applications of Inconel 718 Hollow Bars: Jet engine components, Oil & gas, and Gas turbine operations. Inconel 718 Hexagonal Bars has good mechanical properties – tensile, fatigue and creep – rupture.
Inconel 718 Round Bars | Inconel 718 Round Bars | Inconel 718 Round Bars | Inconel 718 Round Bars | Inconel 718 Round Bars | Inconel 718 Round Bars | Inconel 718 Round Bars
Inconel 718 Triangular Bars is often used in aerospace, rocket motors, space shuttles, spacecraft, nuclear reactors, turbo pump seals, tooling and pumps. Inconel 718 Bars has excellent weldability when compared to the nickel – base super alloys hardened by aluminum and titanium. The results indicated that the fine – grained ring forgings can be obtained by forging the fine – grained Inconel 718 Rods.
Inconel 718 Round Bar Specifications |
||
| Specifications | : | ASTM B166 / ASTM SB166 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Size |
: | 5 mm To 500 mm |
| Diameter | : | 0.1 mm to 100 mm |
| Length | : | 100 mm To 3000 mm Long & Above |
| Finish | : | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Tolerance | : | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Form | : | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
718 Inconel Round Bar Chemical Composition
| Grade | C | Mn | Si | Cu | S | Fe | Mo | Ni | Cr |
| Inconel 625 | 0.08 max | 0.35 max | 0.35 max | 0.30 max | 0.15 min | – | – | 50.0-55.0 min | 17.0–21.0 |
Inconel Alloy 718 Rods Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.2 g/cm3 | 1.350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 482 | 45 % |
Equivalent Grades for 718 Inconel Round Bar
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 718 | 2.4668 | N07718 | NCF 718 | – | – | – | – |
Inconel 718 Round Bar Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Email: sales@sachiyasteel.com
For More Information Visit Our Website: Steel Pipe Factory
